A Groundwork company - serving Miami, FL
T

Therma-Tru Fence Installation in Miami, FL

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Therma-Tru Fence Installation: The Miami Owner’s Guide

If your Therma-Tru fence gate or fencing components are sagging, sticking, or no longer latching cleanly, we install and rebuild Therma-Tru-compatible assemblies in Miami for $4,130 – $10,620 installed, and most parts swap early workweek when the part is in hand. The reader who lands here usually noticed it slowly: a gate that drags on the Saltillo or paver walk, a hinge post that leans after a wet season, or a fence run that needs a shoulder to swing shut after Hurricane Ian or Ian-era storms loosened the footings across Miami-Dade. That’s the pattern – the problem shows up months after the last storm, not during it.

Two contractors installing wooden kitchen cabinets on a residential construction site in Miami, FL

Call (833) 968-1198

Which Therma-Tru Models This Applies To

Therma-Tru is best known for entry and patio doors, so a homeowner calling about “Therma-Tru fence installation” is usually talking about a gate, screening, or fence assembly finished to match the Therma-Tru entry system as part of a coordinated exterior upgrade. The part-matching reality: Therma-Tru specifies component and finish details within its own system, and fence and gate hardware are rarely made by Therma-Tru at all – they’re sourced from third-party gate and structural suppliers and matched to the door line for color and profile. That’s the first thing to sort out. Check the label if you have one: Therma-Tru exterior products carry model and series identifiers on the jamb or door slab edge, and confirm the finish code so a replacement part matches the entry, not just a nearby fence picket. Measure the gate opening and the post spacing before you call anyone. On the OEM-vs-aftermarket question, an exact-match replacement component gives you the cleanest fit and finish; a quality aftermarket equivalent is often functionally identical at a lower cost, and we tell you plainly which is which. We’re an independent service provider and not affiliated with Therma-Tru. We also work with KraftMaid, Cambria, and Silestone for homeowners coordinating full exterior and interior projects.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Therma-Tru Fence Installation Is Failing

  • Gate drags or won’t swing freely. Hinge sag from a loosened post footing – in Miami, limestone and loose fill under paver yards shift with seasonal rain and cause posts to settle unevenly.
  • Post leans after a wet season. Saturated Florida soil plus insufficient footer depth. This is the most common failure mode we see in Miami fence gates, and it doesn’t fix itself.
  • Latch won’t catch or catches hard. Misalignment between gate and post – sometimes just hardware, often a symptom that the post has shifted.
  • Rust or pitting on hardware and fasteners. Salt air accelerated corrosion. Miami properties within a few miles of the coast see this at roughly twice the rate of inland properties.
  • Finish peeling or failing on the assembly. UV and humidity breakdown on a powder coat or painted finish. A failing finish is cosmetic until it exposes substrate, then it’s structural.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed Therma-Tru-compatible fence assembly work in Miami runs $4,130 – $10,620 depending on the length of the run, whether gate posts are rebuilt or just rehung, and finish-matching complexity. That range reflects actual labor plus materials for this market, not a teaser number. What moves it up: post footing replacement, gate hardware upgrades, finish-code matching on higher-end door lines. What keeps it at the low end: simple rehang and re-latch work with sound posts. Every estimate is upfront and line-itemized – parts, hardware, labor, disposal – with no change orders mid-job. The work is covered by our 730-Day Done Right Promise, and we offer 0% financing for 18 months plus $1,000 off projects over $10,000.

DIY or Call Us?

What you can safely check without risk: whether the gate drags, whether the post has any visible lean, whether hardware is corroded, and whether a finish is failing. What we advise against: digging out and resetting a fence post yourself without knowing what’s under the yard or where utility lines run – in Miami, that’s a genuine risk, and a badly reset post will lean again within a season. Post-hole digging is the line we don’t recommend crossing without a locator call. And if your project runs into a larger exterior scope – a coordinated entry, siding, or roof package – we handle it foundation to finish line. Call (833) 968-1198 for a free estimate; a live person answers, 24/7.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 968-1198
Local Service Coverage

Request a Free Estimate in Miami

Tell us what you need - Groundwork Construction Co. of Miami responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch