Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Construction in Gladeview, FL
Groundwork Construction Co. of Miami is an independent Therma-Tru service provider covering Gladeview, FL. We size, set, hang and seal Therma-Tru entry doors and door systems every week, and what separates our Therma-Tru work in Gladeview is that nearly every opening here runs through Miami-Dade County’s High-Velocity Hurricane Zone rules rather than a local building department. No city hall. County permits, county product approval, county inspections. Call (833) 968-1198 for a free estimate on any Therma-Tru door in the 33147 ZIP.

Why Gladeview Residents Choose Us for Therma-Tru Service
We know the line by what fails in South Florida, not by a dealer badge. Fiber-Classic slabs that bubble along the bottom rail after seasons of wind-driven rain. Smooth-Star doors that swell at the stile and drag the strike plate by year six. Classic-Craft doors set into openings that were never square to begin with. That’s the vocabulary we work in.
Gladeview homes make the diagnosis specific. A door that won’t latch in a brick-and-block wall built in the 1950s is usually a sill problem, not a hinge problem. A door that gaps on the latch side of a carport-turned-bedroom is usually a rough-opening problem going back decades. We check the frame before we touch the slab.
What we don’t claim is manufacturer authorization. We’re an independent installer. That independence is the point: we recommend OEM Therma-Tru parts where they matter, exact-match aftermarket hardware where they don’t, and an honest replacement call when a slab is past saving. Every Therma-Tru job carries the 730-Day Done Right Promise. Calls reach a live person 24/7, and technicians are background-checked and arrive in uniform. Upfront pricing, in writing, before anything is ordered.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Solve in Gladeview
- Fiberglass delamination along the bottom rail. Fiber-Classic doors are the most common call we get in Gladeview. Where wind-driven summer rain reaches the sill and there’s no weep drainage, the fiberglass skin separates from the core and the bottom rail starts to bubble and lift.
- Sagging slabs and misaligned deadbolts on Smooth-Star doors. Punishing UV and year-round humidity warp stile and rail edges over time. The slab sags, the door drags the strike plate, and the deadbolt stops lining up come hurricane-season prep.
- Failed weatherstripping and rotted sills behind masonry brickmold. Original Therma-Tru installs in Gladeview’s 1950s-60s concrete-block openings often have pine or composite sills that have soaked for years. Water tracks behind the brickmold, and the leak shows up as a stain on the interior wall months later.
- Frame racking in unpermitted rear additions. A large share of 33147 homes were enlarged without permits. When a Therma-Tru door was set into a rough opening that was never squared, the hinge-side reveal closes tight while the latch side gaps wide. No amount of hinge adjustment fixes a racked frame.
- Failed seals after storm-season pressure changes. Doors that rode out a rough hurricane season frequently come back with a perimeter seal failure that didn’t show up on the day of the storm. We test for air and water infiltration rather than eyeballing the sweep.
Therma-Tru Service in Gladeview: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes every Therma-Tru job in Gladeview: there is no city hall. The unincorporated pocket wedged around NW 79th Street and the 33147 ZIP runs through Miami-Dade County’s product-approval (NOA) process and High-Velocity Hurricane Zone rules instead. That means the door assembly and its glass must carry the correct wind-borne-debris rating before the county permit is pulled, which is a different sequence from jobs inside neighboring Hialeah or Miami proper. Add the unpermitted add-ons common across Gladeview, and the county’s post-storm inspection process routinely surfaces doors set into openings that were never squared. For a Therma-Tru owner, this isn’t a paperwork detail. The right door, in the right opening, with the right rating, is what gets a job through inspection and keeps it sealed through the June-November season. Get the paperwork wrong and a replacement door becomes a financing and sale problem.
Therma-Tru Models & Products We Service in Gladeview
We work across the Therma-Tru entry and patio line in Gladeview: Fiber-Classic and the Fiber-Classic Harvest Collection, Smooth-Star fiberglass entry and patio doors, and the Classic-Craft Canvas, American and Estate collections, along with sidelite systems and matching decorative glass.
Parts sourcing follows the job, not a shelf. We don’t claim local stock. We spec Therma-Tru OEM or exact-match sills, sweeps, weatherstripping and hinge kits so the slab keeps its engineered water and impact ratings, and we order in the correct part number against your door’s model and size. Where OEM isn’t available, an exact-match aftermarket sweep or sill is fine. A compromised slab isn’t a patch-and-paint call. See our Therma-Tru service line for the full scope we cover.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Service Pricing in Gladeview
Pricing in Gladeview depends on three variables: whether you need a full door system or an opening refresh, whether the rough opening is square, and what the wind-borne-debris rating means for the glass. Here’s our market-calibrated range:

| Service | Price Range |
|---|---|
| Window Replacement (impact-rated door/glazing scope) | $4,500 – $15,000 |
| Impact Window Installation (rated door glass and sidelites) | $8,000 – $25,000 |
| Small Bathroom Remodel (door and opening refresh) | $5,000 – $12,000 |
A free estimate in Gladeview includes a rough-opening measurement, a sill and sweep inspection, the model and size identification, and a written line-item quote you can run through county permitting without surprises. What you see is what you pay. Call (833) 968-1198 for an exact quote on your Therma-Tru door.
Serving Gladeview, FL – Our Local Coverage Area
We serve Gladeview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Construction in Gladeview
Does a Therma-Tru door replacement in Gladeview need a Miami-Dade NOA?
Yes. Because Gladeview has no city building department, any door replacement runs through Miami-Dade County’s product-approval (NOA) process. The door assembly and its glass must carry the correct wind-borne-debris rating for the High-Velocity Hurricane Zone, and the county permit is pulled separately from the install. We verify the rating before we order. Call (833) 968-1198 to talk through your specific opening.
Why is my Therma-Tru Fiber-Classic door bubbling along the bottom?
Bubbling along the bottom rail is almost always water ingress where wind-driven rain reaches the sill and there’s no weep drainage. On a Fiber-Classic slab in a Gladeview concrete-block opening, that pattern is very common on original installs. Short-term, the perimeter seals can be replaced. If the fiberglass skin has separated from the core, the slab is a replacement call. Call (833) 968-1198 and we’ll diagnose it in person for free.
My Smooth-Star door won’t latch after a few summers – is it the hinges or the slab?
It’s usually the slab, not the hinges. UV and humidity warp the stile and rail edges over time, so a Smooth-Star slab sags and drags the strike plate. We check the rough opening first. If the frame is square and the slab has warped, no hinge adjustment will fix it. Call (833) 968-1198 for an in-person check.
Can a Therma-Tru door be set into an unpermitted room addition in 33147?
Yes, but the opening has to be squared and the assembly must still pass county inspection for the HVHZ. A large share of 33147 homes were expanded without permits, and those openings racked years ago. The county’s 40-year recertification process surfaces these on a regular basis, and bringing the door to code is often the first step. Call (833) 968-1198 and we’ll walk the opening with you.
Should I repair or replace a rotting Therma-Tru sill behind a masonry brickmold?
If the slab is sound and only the sill and perimeter seals have failed, repair is the better money. A sagging, delaminated or warped slab in a High-Velocity Hurricane Zone opening is a replacement call. We won’t patch-and-paint a compromised slab. Call (833) 968-1198 for an honest assessment.
Service Areas Near Gladeview
We cover Gladeview and the surrounding neighborhoods in this part of Miami-Dade, including Gladeview service area, West Little River, Pinewood, Brownsville, and Miami Springs. Each of these communities has its own inspection quirks and door-opening realities, and we work them all.
Book Your Therma-Tru Service in Gladeview Today
If your Therma-Tru door in Gladeview has stopped latching clean, bubbled along the bottom, or you’re replacing a slab that’s seen too many hurricane seasons, call Groundwork Construction Co. of Miami at (833) 968-1198. Free estimate, written line-item quote, live person on the line 24/7. From foundation to finish line, with the 730-Day Done Right Promise behind every job.
Written by the team at Groundwork Construction Co. of Miami.