Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Kitchen Remodeling: The Miami Owner’s Guide
Unilock kitchen remodeling in Miami typically runs $16,520 to $53,100 installed, and the exact number depends on cabinet layout, countertop material, and whether the plumbing or electrical has to move. When we quote a Unilock kitchen project here, that number is upfront and it holds. Most owners don’t come to us because they know a part failed. They come because a cabinet door won’t stay shut, a drawer slides crooked, or the countertop seam over a Miami kitchen window has started to shadow within a year of install. The complaint sounds cosmetic. The cause usually isn’t.

Key Takeaways
- Unilock kitchen installed cost in Miami: $16,520 to $53,100, quoted upfront before work starts.
- Small kitchens run lower, and cabinet-only or countertop-only work is priced separately so you don’t pay for scope you don’t need.
- Every Unilock installation we perform is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right.
- We’re an independent contractor, not affiliated with Unilock. We match the right parts and materials to your model and spec.
Which Unilock Models This Applies To
Unilock’s kitchen line is built around cabinet systems and surface panels, and the model number matters more than most homeowners realize. A door hinge spec’d for a standard-depth wall cabinet won’t seat correctly on a deep pantry unit from the same series. Before we order anything, we pull the model label – usually inside the door, on the back panel of a base cabinet, or stamped on the little spec card that ships in the hardware bag – and confirm the series and revision. Two cabinets that look identical from the front can sit on different hinge patterns depending on manufacturing year.
The OEM-versus-aftermarket decision is real. Genuine Unilock replacement parts match the original finish and fit, and for anything load-bearing – drawer slides, hinge plates, cabinet box connectors – we recommend OEM. For hardware that doesn’t carry weight, a quality aftermarket equivalent can save money without cutting into lifespan. We source per project; we don’t stock Unilock parts, and no parts ride on a truck. For kitchen surfaces, we also install and service KraftMaid cabinetry, Cambria quartz, and Silestone counters when the job calls for a different brand match.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Kitchen Remodeling Is Failing
South Florida heat and humidity put cabinet systems through more than most owners expect. Here’s what we see on Miami calls, and what’s actually going on behind each symptom.
- Cabinet doors that drift or won’t close flush. The hinge plate has loosened or the cabinet box has swelled slightly from moisture. Miami’s humidity pushes wood and composite panels to move, and a hinge spec’d for dry climates fails faster than a properly sealed one.
- Drawers that bind or tip sideways. The slide rail has worn or the mounting screws have pulled from the box. Undermount slides rated for the door’s weight class last far longer than the standard side-mount slides that often get swapped in.
- Countertop seams that show a dark line or shadow. The seam adhesive has failed or the substrate below has shifted. Over a Miami kitchen window, direct sun through impact glass heats a seam unevenly and shortens its life.
- Surface panels with bubbling, lifting edges, or a dull chalky finish. Moisture has gotten behind the panel or UV has broken down the finish. This is common in kitchens that see steam from daily cooking with weak exhaust.
- A gap between cabinet and wall or floor that keeps widening. The framing or floor has settled, and the cabinet is carrying load it wasn’t meant to. This one needs a look before you replace anything.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Miami pricing for Unilock kitchen work falls into clear line items. Here’s what we quote, installed, with parts and labor shown separately so you know what you’re paying for.
| Scope | Installed Range |
|---|---|
| Full kitchen remodel | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| Cabinet installation | $4,720 – $15,340 |
| Countertop installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
What moves the range: cabinet count and depth, countertop material and edge profile, whether the island needs new electrical, and whether plumbing has to relocate. We use upfront pricing – the number you see is the number you pay – and the work is backed by the 730-Day Done Right Promise. Most kitchen jobs are completed in a single visit when scope allows.
DIY or Call Us?
Some checks are safe and smart to do yourself. Open the cabinet door and look for the model label, measure the cabinet width and depth, and note whether the hinge is face-frame or frameless. That information saves time on the call. What goes wrong with DIY is scope creep – tightening a hinge plate that’s already stripped, or forcing a drawer slide that needs a different weight class. You end up with a cabinet box that’s damaged and a larger repair. One honest note on the countertop side: anything that requires cutting or lifting stone needs a pro, full stop. Call (833) 968-1198 and we’ll tell you what’s repairable and what needs replacing.
FAQs
We expect a properly installed Unilock cabinet system to hold its fit and finish well past a decade in a Miami kitchen, but the lifespan hinges on humidity control, exhaust ventilation, and whether the install accounted for our climate. A cabinet system installed with the wrong hinge or sealed poorly can start drifting in two or three years. Call (833) 968-1198 and we’ll assess what you have and tell you the honest timeline.
Often, yes. A loose hinge plate can be re-seated with a wood repair insert, and a drawer slide can be swapped without replacing the cabinet box. What can’t be repaired reliably is a cabinet box that has swelled or a countertop seam that’s opened up – those need replacement. We’ll tell you which side of that line your job sits on. Estimates are free at (833) 968-1198.
A single cabinet door or hinge replacement is a same-visit job, usually under two hours. A full cabinet run or a countertop swap runs a full day or more, and we schedule it so you’re not without a working kitchen for longer than the scope requires. We’ll give you a firm timeline before we start. Call (833) 968-1198 to get it on the calendar.
We pull your model label and series information from the cabinet, confirm the manufacturing revision, and order the OEM part or a quality aftermarket equivalent that matches the load and fit. We don’t stock Unilock parts and no parts ride on a truck – each order is placed against your specific model. You get the parts-plus-labor breakdown before anything is ordered. For a free estimate, call (833) 968-1198.
When a Miami kitchen needs Unilock parts matched correctly and installed with a guarantee behind them, that’s our work. We’ve served local communities for over 42 years under the 730-Day Done Right Promise, and every project starts with a free estimate – no surprises, no hidden line items. Calls are answered by a live person, 24 hours a day. We’re proud to help Miami homeowners get their kitchens right the first time.
Call (833) 968-1198 for your free estimate on Unilock kitchen remodeling in Miami today.
Written by the team at Groundwork Construction Co. of Miami, serving Miami and nearby areas.