Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Westview, FL: What They Cost and How Long They Take
Custom & Geometric Windows in Westview usually run $8,000 to $25,000 installed, and a typical job takes three to six weeks from signed contract to final inspection. That range covers arched, radius, trapezoid, eyebrow and other non-rectangular units cut to fit an existing opening, built to Miami-Dade High Velocity Hurricane Zone approvals, and set into concrete-block walls. Call (833) 968-1198 to schedule a free on-site estimate and get a written line-item number for your Westview home.
The Process, Stage by Stage
Custom shapes aren’t stocked anywhere. Every one of these windows is built to the opening, so the schedule is driven by fabrication, not by how fast a crew can work. Here’s how a job runs.
- 1
Day 1: measure and template. We measure the rough opening in multiple planes and, for radius and arched units, build a physical template of the curve. This is the stage where homeowners decide frame material, glass package, grille pattern and finish. Expect one to two hours on site. On concrete-block walls, this is also where we confirm what’s behind the stucco and whether furring strips give us a clean fastening plane.
- 2
Days 2 to 5: engineering and permit submittal. Because Westview is unincorporated, the package goes to Miami-Dade County rather than a city building department. Custom shapes need product approval numbers and a shop drawing tied to the specific unit, so we submit those together. Review commonly runs two to four weeks, and that clock runs parallel to fabrication.
- 3
Weeks 2 to 5: fabrication. Custom and geometric units are built to order. Lead times move around with glass supply, but four to six weeks is realistic for curved and angled shapes, longer if the unit needs laminated impact glass in a specialty thickness.
- 4
Install days: one to two days. The old unit comes out, the opening gets prepped and flashed, the new window is set, shimmed, anchored and sealed, and the interior trim goes back. Masonry openings take longer to prep than wood-frame ones because there’s more patching and stucco repair around the perimeter.
- 5
Final inspection and punch list. The county inspects, we walk the job with you, and anything on the punch list gets handled. Homeowners sign off on operation, screens and finish at this point.
Two decisions drive the whole timeline: glass package and grille pattern. Lock those on day one and the rest moves. Change them after fabrication starts and you’re back in line.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the money in a geometric window is in the shape and the glass, not the frame. Still, the frame choice matters here because Westview walls are solid masonry.
- Vinyl frames. The value pick. Good thermal performance, low maintenance, and available in radius and arch profiles. The trade-off is color range: mostly whites and a few tans, and vinyl can’t be painted to match a specific stucco tone.
- Aluminum frames. Strong in wide arched spans where vinyl would need extra reinforcement. Slim sightlines suit geometric shapes. Less thermally efficient unless it’s a thermally broken profile, which adds cost.
- Wood-clad frames. Real wood inside, aluminum or vinyl outside. The right call when the interior is being finished to a high standard, and Andersen and Marvin both build custom shapes in this category. Highest cost of the three.
- Glass package. Impact-rated laminated glass is the baseline for Miami-Dade. Low-E coatings cut solar heat gain and UV, which matters in South Florida sun. Frosted or textured glass is common in bathrooms and stairwells for privacy without losing the shape.
- Grilles and muntins. Colonial, prairie, or no grilles at all. On arched windows, grille layout is often the difference between a window that reads as custom and one that reads as an afterthought.
- Interior finish. Drywall return, wood casing, or a simple trim profile. This is also where Schluter trim shows up on adjacent tile work when a window sits in a shower or backsplash wall.
What Custom & Geometric Windows Costs in Westview, FL
Plan on $8,000 to $25,000 for a set of custom and geometric windows in Westview, installed. A single small radius accent window can land near the bottom of that range. A whole-house package with arched units over a front entry and trapezoids in a gable pushes toward the top.
Five things move the number:
- Shape complexity. A true arch or eyebrow costs more than a rectangle because the frame is bent or milled, not cut from straight stock. Trapezoids and custom polygons need angled joinery.
- Size and count. Every unit carries its own fabrication and approval cost, so five windows cost more than proportionally more than one.
- Glass specification. Impact laminated glass, Low-E coatings and privacy glass each add. A specialty thickness for a very large curved unit adds more.
- Existing condition. Rotted framing, cracked stucco around the opening, or an opening that isn’t square all add prep time. Concrete-block walls with furring strips usually need patching and re-flashing.
- Structural change. Widening an opening or adding a new one means a header, engineering and a bigger permit scope. Keeping the existing opening keeps the job simple.
A written estimate from us lists each unit, the glass spec, the frame material, permit fees, and labor as separate lines. What it won’t include: structural repairs found after demo, and interior painting beyond the trim line. Those get quoted before anyone touches them. No-hassle upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Westview Homes Specifically Do to This Job
Westview is unincorporated Miami-Dade, ZIP 33167, which means window permits go through the county, not a city building department. That’s a real difference on a custom job: county review wants product approval documentation for every non-standard unit, and geometric shapes need shop drawings attached. Plans that skip that step get kicked back. Because Westview sits in the High Velocity Hurricane Zone, every window must carry Miami-Dade product approval for the wind pressure at that opening, no exceptions.
The housing stock shapes the work too. Much of what we open up here is 1950s to 1970s concrete-block single-family homes with barrel-tile or flat roofs, often with interior furring strips over the block. Setting a window means drilling and anchoring into solid masonry, and the stucco around the opening usually needs patching on both sides. On the older block homes we commonly find that the original opening isn’t square, which is exactly why we template rather than order off a tape measure.
UV and salt-laden humidity chew on exterior finishes here, so we spec impact glass with a Low-E coating and pay attention to sealant quality, since that’s what fails first. The rainy season compresses exterior schedules into the drier winter months, so a fall contract usually lands a winter install.
This is also a neighborhood of small infill projects, churches and institutions rebuilding on tight lots, and homeowners renovating rather than moving. That’s why so much of our Westview work is a single arched entry window or a matched set of geometric units rather than a full-house package. If the wider project scope comes up, we handle it as part of a full Windows & Doors in Westview plan, and homeowners often pair new windows with Concrete Driveways & Concrete Work in Westview or Asphalt Driveways & Resurfacing in Westview while the exterior is torn up anyway. Our Windows & Doors service covers the full range, and we work throughout Westview and the surrounding area.
Serving Westview, FL – Our Local Coverage Area
We serve Westview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Custom & Geometric Windows in Westview
Plan on three to six weeks from signed contract to final inspection, with the longest stretch being fabrication and county permit review. The install itself is usually one to two days. Call (833) 968-1198 for a schedule estimate built around your specific shapes.
Yes. Because Westview is unincorporated Miami-Dade, the permit goes through the county, and every custom unit needs product approval documentation for the High Velocity Hurricane Zone. We handle the submittal and the inspection. Call (833) 968-1198 and we’ll walk you through what the county will need.
Most jobs land between $8,000 and $25,000 installed, depending on how many units, how complex the shapes are, and the glass package. A single small radius accent window sits near the low end. Call (833) 968-1198 for an exact quote – estimates are free.
In most cases, yes. If the shape fits the existing opening, we template it and build to that opening, so no header work is needed. Widening or adding an opening means engineering and a larger permit scope. We’ll tell you which situation you’re in at the free estimate.
Our workmanship is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. The window units themselves carry the manufacturer’s warranty, and we hand you that paperwork at the walkthrough. Call (833) 968-1198 with questions about coverage.
Get a Free Estimate on Custom & Geometric Windows in Westview
Call (833) 968-1198 to schedule a free on-site estimate for custom and geometric windows in Westview. A live person answers, day or night. We’ll measure the openings, template anything curved, and leave you with a written line-item quote covering units, glass, permits and labor, covered by the 730-Day Done Right Promise. No pressure, no surprises.
Written by the team at Groundwork Construction Co.