Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Opa-locka, FL: What It Costs and How Long It Takes
Most door installation projects in Opa-locka run $450 to $2,800 per door opening, including the unit, hardware, trim and labor. A single interior door swap is a one-day job; an exterior entry or a multi-door package on one of the older block homes here usually takes two to four days because of wall prep and stucco patching. Call (833) 968-1198 and we’ll walk the openings with you and put the number in writing before anything is ordered.
A 1950s Opa-locka doorway that won’t take a modern door
Walk into a lot of the homes off Ali Baba Avenue and Sharazad Boulevard and you find the same thing: a door frame that was cut for a 1¾-inch slab back when the house went up, sitting inside a block wall with no jack stud where a modern rough opening expects one. The old slab sags. The strike plate has been moved twice. Someone stuffed weatherstripping in the gap and called it done. When you try to hang a new pre-hung door in that opening, it racks, the latch misses, and you’re back where you started.
That’s the reality of Door Installation in Opa-locka. It is rarely a swap. On 1920s to 1950s stucco-over-block construction, and especially in the themed buildings near the historic core, the rough opening is often non-standard. We open the wall to check for framing and anchors before we quote the final number, because a door that fits a Hialeah 1990s build won’t drop into a 1952 Opa-locka wall without prep. Historic masonry and decorative stucco details add a step most installers skip: matching the surround so the new door doesn’t look bolted onto an old facade. Homeowners here often pair a door upgrade with the wider exterior work in our Windows & Doors in Opa-locka scope when several openings are going at once.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
How we run a door installation, stage by stage
Here’s the actual sequence, not a brochure version of it.
1. Walk-through and measurement (day 1, about an hour)
We measure every opening, check wall thickness and plumb, and note whether the existing frame is salvageable or needs to come out. You decide which doors are getting replaced now and which can wait. This is when we confirm whether an opening needs an engineering look, which matters on load-bearing block walls.
2. Ordering and lead time (3 to 10 business days)
Standard interior slabs and common exterior units arrive fast. Impact-rated exterior doors and anything with a custom finish run longer. You pick the door, the hardware and the finish at this stage, and that decision drives the timeline more than anything else.
3. Demo and framing prep (day of install, 2 to 4 hours)
Old door out, trim off, and we inspect what’s behind the wall. On older homes we’re looking for rot at the sill, missing framing, and whether the header is doing its job. If the opening needs new framing or a corrected rough opening, that’s a conversation before we go further, not after.
4. Set, shim, seal, trim (2 to 4 hours per door)
The unit goes in plumb and square, shimmed at the hinges, insulated at the frame, sealed at the exterior, and trimmed out. We check the latch, the swing and the weather seal before we call it done. Exterior doors get a proper threshold and flashing detail, which is where water intrusion starts if it’s rushed.
5. Patch, paint touch-up and final walk (1 to 2 hours)
Stucco patching on the exterior, drywall and trim touch-up inside, and a walk-through with you on every opening. You operate each door yourself and we fix anything that doesn’t feel right on the spot.
The door options you’ll actually weigh
Most of the decision comes down to material, and each one has a real trade-off here in South Florida’s sun and summer rain.
- Steel exterior doors – strong, secure and impact-rated options are available. They hold up well but dents show, and the finish has to stay sealed against salt air and sun.
- Fiberglass exterior doors – won’t dent or rot, finishes can mimic wood, and they handle humidity better than wood. Higher upfront cost than steel.
- Wood doors – the right look for a historic facade, but wood needs real maintenance in this climate and continuous sealing against moisture.
- Hollow-core interior doors – the budget choice for bedrooms and closets. Light, cheap, and fine where nobody’s slamming them.
- Solid-core interior doors – better sound deadening and a heavier feel, worth it on bathrooms and main rooms.
- Impact-rated vs. standard glazing – if the door has glass, impact-rated units cost more but meet wind-driven rain and hurricane expectations that matter on Opa-locka’s older homes.
Hardware is its own small decision: lever vs. knob, finish, and whether you want a keyed exterior set matched across doors. We’ll show you the difference in feel and price so you’re choosing, not guessing. When a door package turns into a larger envelope project, our Windows & Doors service covers the rest of the exterior openings.
See the difference
Before
After
Before
After
Before
AfterWhat Door Installation costs in Opa-locka, FL
Door installation in Opa-locka generally lands between $450 and $2,800 per opening, depending on the door type and what’s behind the wall. Here’s how the line items break out:
| Item | Typical range |
|---|---|
| Interior door (slab or pre-hung) | $450 – $1,200 |
| Exterior entry door, standard | $900 – $2,000 |
| Impact-rated exterior door | $1,400 – $2,800 |
| Framing or rough-opening correction | $300 – $900 |
| Stucco patching / exterior trim | $200 – $600 |
What pushes a job to the high end: a non-standard rough opening that needs framing, rot at the sill on an old block wall, impact-rated glass, custom finishes, or multiple doors in one visit. What keeps it low: a straight swap of a standard interior slab into a sound frame. Our written estimate is line-item and upfront – the number you see is the number you pay, with no change orders unless you add scope. Not included unless we scope it: painting the full wall, replacing damaged flooring at the threshold, and any structural repair an engineer flags. Call (833) 968-1198 for an exact quote – estimates are free.
What Opa-locka homes specifically do to this job
This is where Opa-locka differs from neighboring Hialeah or Miami Gardens. The city holds the largest collection of Moorish Revival architecture in the Western Hemisphere, a 1926 themed development of domed roofs, arched openings and ornate stucco. That means door work here often involves matching period-specific surrounds, working carefully around historic masonry, and navigating preservation expectations that simply don’t apply a few miles away. In the original 1926 Opa-locka Company buildings, we routinely find load-bearing masonry walls and non-standard 1920s framing with no modern anchors – which on a door opening means checking the header before we touch anything, and sometimes pulling in an engineering review. Layer in the climate: intense sun, heavy summer rain and hurricane-season wind-driven rain chew up exterior doors and frames, so impact-rated units and well-sealed thresholds matter more here than in drier markets. Most of the homes we work on in ZIP codes 33054 and 33055 are 1920s to 1950s stucco-over-block, so door installation is usually renovation, not new build, and the prep is the job.
Serving Opa-locka, FL – Our Local Coverage Area
We serve Opa-locka and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Door Installation in Opa-locka
A single interior door is typically done in one day, and a package of three to five doors or an exterior entry runs two to four days depending on framing and stucco patching. Call (833) 968-1198 for a schedule based on your openings.
Replacing a door in-kind in an existing opening usually does not require a permit, but impact-rated exterior doors and any change to the rough opening or structural wall can trigger one. We pull the permits and pass the inspections when the scope calls for it, and we’ll tell you upfront which side of that line your job falls on.
In most cases yes, since a door replacement works within the existing opening. The exception is an old block wall with non-standard framing, where correcting the rough opening is the honest fix – and that’s a conversation we have before we start, not a surprise mid-job.
A standard exterior entry runs about $900 – $2,000, and an impact-rated unit lands around $1,400 – $2,800 depending on size and finish. Call (833) 968-1198 for an exact quote – estimates are free.
Every door we install is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. The manufacturer’s warranty on the door itself runs separately. Call (833) 968-1198 to talk it through.
Get a free Door Installation estimate in Opa-locka
If your doors are past their service life or you’re matching a historic facade, the fastest way to a real number is a free on-site estimate. We’ll measure every opening, flag any framing or stucco work, and hand you a written, line-item quote. Call (833) 968-1198 – a live person answers around the clock – and we’ll get you scheduled for Door Installation in Opa-locka. We also cover the surrounding area, so if you’re nearby, see our Opa-locka service page. Homeowners often pair this with a new Chain Link Fence in Opa-locka or a Vinyl Fence in Opa-locka while the crew is on site.
Written by the team at Groundwork Construction Co.