Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Olympia Heights, FL: What It Costs and How Long It Takes
A wrought iron fence in Olympia Heights typically runs $3,500 to $9,000 for a standard residential lot, and most jobs wrap in two to four working days once the permit clears. The price covers layout, digging, concrete footings, setting posts, hanging gates and finishing the metal. Call (833) 968-1198 for a free on-site estimate. We measure your actual frontage and gate count, then hand you a written line-item quote.
How the Job Actually Runs, Day by Day
Iron fence work is mostly prep and footing work. The iron itself goes up fast once the posts are set. Here’s the sequence we follow on Olympia Heights properties.
Stage 1: Site walk and layout (day one, 1 to 2 hours). We walk the property line with you and confirm where the fence sits, which is the single most common source of neighbor disputes on older Olympia Heights lots. You decide gate placement and swing direction here. We check for the survey pins or, if there aren’t any, flag that a boundary staking may be needed before we set anything in concrete.
Stage 2: Utility locate (48 to 72 hours before digging). Florida law requires a call to the state one-call locate service before anyone turns soil. That takes a couple of days to come back, so it runs in parallel with permit paperwork, not after. We don’t skip it. A punctured irrigation line or, worse, a private electrical run to a shed is an expensive afternoon.
Stage 3: Demolition and preparation (day two, half to a full day). If there’s an old chain link or failing wood fence in the way, it comes out now, including the concrete footings. On Olympia Heights lots this step often takes longer than expected because older fences were set with oversize concrete collars. We haul the debris the same day so your yard isn’t a pile for a week.
Stage 4: Digging and footings (day two to three). Posts go into holes sized for the panel span, filled with concrete and left to cure. This is the part that determines whether the fence stays plumb for twenty years. You’ll decide at this point whether you’re going with surface-mounted posts on an existing concrete curb or full in-ground footings. Curing runs 24 to 48 hours before we hang anything heavy.
Stage 5: Setting panels, gates and finish (day three to four). Rails and pickets go up, gates get hinged and checked for swing and latch, and we touch up any scratches in the coating with matching paint. Then we walk the whole line with you.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the price spread comes down to what metal and what style you pick, not the labor.
- Real wrought iron vs. steel vs. aluminum: True wrought iron is the heaviest and the most expensive, and it holds up for generations. Powder-coated steel is the middle option most Olympia Heights homeowners choose, because it gives you the same look at a lower price. Aluminum is the lightest and the cheapest, and it resists rust best in our humidity, but it dents where steel would only scratch.
- Powder coat vs. paint: Factory powder coating is baked on and lasts far longer in South Florida sun than field-applied paint. Paint needs touch-ups every few years; powder coat generally doesn’t. Worth the upcharge on a fence you plan to keep.
- Panel height (4 ft vs. 5 ft vs. 6 ft): Front-yard decorative fencing is often 4 feet. Pool and side-yard enclosure usually goes 5 to 6 feet. Taller panels mean more material and heavier posts, so going from 4 to 6 feet moves the number noticeably.
- Picket spacing and style: Tight pickets cost more in material than open ornamental patterns. Estate-style with cast finials and scrollwork adds cost and charm; simple spear-top is the budget-leaning pick.
- Gate hardware: A basic latch and hinge is cheap. Self-closing, self-latching hardware costs more but matters if you’ve got a pool or small kids. You decide gate count and hardware at layout, not after the concrete’s poured.
What Iron Fence Costs in Olympia Heights, FL
Expect $3,500 to $9,000 for a residential iron fence in Olympia Heights, with most jobs landing in the $4,000 to $6,500 range. The four things that push a job toward the high end:
- Linear footage. A corner lot or a long street frontage means more panels, more posts, more concrete. Fence pricing is driven by the foot.
- Gate count and width. A single walk gate and a double drive gate for the carport add real cost. Wide gates need heavier posts and stronger hinges.
- Existing fence removal. Tearing out old fencing, especially buried concrete footings, adds a day of labor.
- Material grade. Aluminum sits at the low end; powder-coated steel in the middle; true wrought iron at the top.
- Permit scope. Miami-Dade permitting and any required product documentation add time and a fee.
A written estimate includes the layout, footings, panels, gates, hardware, debris haul-away, and the permit if one’s required. It typically doesn’t include survey work if pins are missing, or landscape repair where we had to dig through a planting bed. We’ll tell you upfront which of those applies. The number you see is the number you pay, and it’s backed by our 730-Day Done Right Promise. We also offer 0% financing for 18 months and $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhy Olympia Heights Housing Stock Changes This Job
Olympia Heights is unincorporated Miami-Dade, ZIP 33165, and it’s a mid-century suburban pocket where most of the housing went up between the 1950s and the 1970s as single-story concrete-block and stucco ranch homes. That matters for fencing in two specific ways. First, these lots were often subdivided with minimal grading, so property lines and grade can be fuzzier than on newer plats, and we frequently find survey pins missing or buried. Second, the enclosures and carport conversions common here mean the fence has to work around existing structures rather than a clean empty lot. We also see a lot of original chain link at the property line that’s rusted out at the posts but still set in solid concrete collars. Miami-Dade’s High-Velocity Hurricane Zone rules mean any fence over a certain height or attached to a structure can trigger product approval paperwork, and posts need anchoring that accounts for wind uplift, not just soil. All of this is part of why our team stays fluent in the county’s approval process; it’s the difference between a fence that clears inspection and one that stalls. We cover Olympia Heights and the surrounding streets regularly, and homeowners often pair this with Patios, Walkways & Pool Decks in Olympia Heights when they’re reworking the whole yard at once.
Serving Olympia Heights, FL – Our Local Coverage Area
We serve Olympia Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Iron Fence in Olympia Heights
Most residential jobs take two to four working days on site, plus the permit and utility-locate window ahead of it. A simple run with one gate on an empty lot gets done in two days. A job with an old fence to tear out, a double gate and inspection holds takes closer to four. Call (833) 968-1198 to schedule and we’ll give you a real date range.
Often yes, especially for anything above the standard residential height or attached to a structure, because Miami-Dade wants product approval documentation for wind-rated materials. We pull the permit and handle the inspection. We’ll confirm on the site visit whether your specific fence falls under the permit requirement, so you’re not guessing. Call (833) 968-1198 for an exact quote; estimates are free.
No. We give you a written line-item quote before scheduling and the number you see is the number you pay. The only changes are ones you request, like adding a gate mid-job, and those get priced and approved in writing before we do the work. That’s the whole point of upfront pricing. Call (833) 968-1198 to get your quote started.
A typical single-story Olympia Heights lot runs $3,500 to $9,000 depending on footage, gate count and material grade. Most jobs land near $4,000 to $6,500. If you’re adding the fence as part of a Fence Installation in Olympia Heights scope, we can price it together. Call (833) 968-1198 for a firm number after we measure.
Workmanship is covered by our 730-Day Done Right Promise, one of the longest guarantees in the residential space. If something we installed isn’t right, we make it right. Material warranties vary by product line and we’ll walk you through them at the estimate. Visit our Fence Installation service page to see how iron fits our broader fencing work, or call (833) 968-1198 to talk it through.
Get a Free On-Site Iron Fence Estimate in Olympia Heights
Call (833) 968-1198 and we’ll set a free on-site estimate for your iron fence in Olympia Heights. We measure the actual frontage, count the gates, flag any survey or permit needs, and leave you with a written line-item quote. Calls get answered by a live person, day or night. If you’re planning a bigger yard project, we also handle ADU Design & Permitting in Olympia Heights. Start with a call, and see why homeowners across Olympia Heights call us when the fence has to last.
Written by the team at Groundwork Construction Co.