Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Pinewood, FL: What It Costs and How Long It Takes
An iron fence in Pinewood, FL typically runs $3,500 to $9,000, installed, with most single-family lots landing between $5,200 and $7,400. A standard 150-linear-foot aluminum or wrought-iron-style run takes two to four working days from layout to final inspection. The wide spread comes down to height, style density, gate count, and whether the posts need concrete footings in the flood-zone blocks near the Little River. Call (833) 968-1198 and we’ll scope your specific property line on site.
How We Build an Iron Fence in Pinewood, Start to Finish
Iron fencing is less forgiving than wood or vinyl because every post has to be plumb to within a fraction of an inch and every panel is welded or bolted to a fixed dimension. Here’s the real sequence we run.
Stage 1: Site walk and property line verification (day 1, about 90 minutes)
We measure the full run, confirm the property line against your survey, and flag anything that changes the design – existing concrete footings, irrigation lines, utility easements, or a swale at the back that needs the fence set higher to clear storm-water flow. You decide the fence height (4, 5, or 6 feet) and whether the finish is a standard matte black or a custom color. This is also when we confirm whether your HOA requires a specific setback from the sidewalk.
Stage 2: Permit filing and utility locate (days 2-5, mostly waiting)
In Pinewood’s high-velocity hurricane zone, an iron fence above a certain height and any fence with masonry pilasters will pull a Miami-Dade permit, and that means a product-approval submittal showing your panels and posts meet windborne-debris requirements under the Florida Building Code. We file it, call for the 811 utility locate, and schedule the dig. You don’t do anything at this stage except sign the application – if we need a signature, we tell you in advance.
Stage 3: Demo and footing layout (day one of construction, 4-6 hours)
Old fence comes out, posts and concrete get hauled off. We string-line the new run and mark every post hole at 6 to 8 feet on center, wider spacing for decorative panels, tighter near gates. Footings get dug to the depth the engineered design calls for, which in Pinewood’s shallow water table near Northwest 22nd Avenue can mean we hit water in the hole and have to coordinate with the floodplain elevation requirement before pouring concrete.
Stage 4: Posts, panels, and gates (days 2-3, 8-14 hours total)
Posts get set in concrete and cured before panels go on, which is why a job that “looks” one-day takes three. Panels are welded or bolted in place, gates are hung and adjusted, and every latch and hinge gets tested. If you ordered a custom finish, this is when touch-up paint goes on any scratched welds.
Stage 5: Inspection and walkthrough (final half-day)
We meet the Miami-Dade inspector on site, pass the wind-load and footing inspection, and then walk the fence with you – every panel, every post, every gate swing. Any adjust happens before we leave. That final stage is covered in writing by the 730-Day Done Right Promise: if a post shifts or a panel loosens, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Iron fencing covers a lot of ground in price and lifespan. Here’s what actually gets decided at the estimate table:
- Wrought iron vs. aluminum – True wrought iron is heavier, stronger, and substantially pricier; it suits ornate designs and long-horizon properties. Aluminum is the practical default for most Pinewood homes: it looks nearly identical at a distance, won’t rust, comes powder-coated, and it’s what fits the $3,500 – $9,000 range. Budget aluminum lands near the low end; heavy-walled aluminum with a welded, not screwed, assembly lands near the top.
- Picket style density – A 4-inch picket spacing reads as a security fence; 6-inch spacing looks more open and costs less because it uses fewer pickets per panel. You’re paying per linear foot of picket, so density moves the price fast.
- Panel height – 4 feet is the cheapest and most HOA-friendly; 5 feet is the sweet spot; 6 feet costs meaningfully more and may trigger stricter wind-load review in the 33167 zone.
- Gate and automation – A walk gate is a small add; a double driveway gate, especially one set up for a motor later, needs heavier posts and a deeper footing, which is the single biggest line item that can push you to the high end.
- Finish – Standard powder-coat black or bronze is included; a custom color match or a two-tone finish typically adds a few hundred dollars.
What an Iron Fence Costs in Pinewood, FL
For this city, plan on $3,500 to $9,000 for a residential iron or aluminum fence, installed and inspected. Here’s what moves the number:
- Linear footage – A typical quarter-acre lot runs 150 to 200 feet; a corner lot or one with a pool enclosure can double that.
- Material grade – Aluminum panels at the budget end versus heavy-wall welded aluminum at the top.
- Gate count and type – One walk gate is routine; a driveway double gate with a motor pre-wire is a several-hundred-to-over-a-thousand dollar swing.
- Site conditions – Shallow water table, existing concrete to cut out, or a slope that needs stepped panels all add footing and labor cost.
- Permit scope – A plain fence with no masonry may avoid a filed permit; masonry pilasters or a fence over 6 feet will require one, which adds review time and a permit fee.
Your written estimate breaks out fence material, footings, gates, permit, and haul-away line by line. What it typically does not include: repairing an existing masonry wall the fence attaches to, landscaping repair, or an electric gate operator (we quote that separate so you’re not paying for hardware you don’t want yet). 0% financing for 18 months is available, and projects over $10,000 get $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Pinewood Homes Specifically Do to This Job
Pinewood sits inside Miami-Dade’s high-velocity hurricane zone, and that changes iron fence work in ways most Florida contractors don’t have to think about. Every panel, post, and connection has to meet windborne-debris and product-approval requirements under the Florida Building Code, and any fence with masonry pilasters or over six feet gets a real engineered submittal, not a generic spec sheet.
The larger issue is the ground. In the low-lying blocks east of Northwest 22nd Avenue near the Little River, we regularly hit a shallow water table while digging footings, and we have to coordinate the floodplain elevation requirement before we pour. On the housing side, most of what we fence here is 1950s-60s concrete-block ranch homes with flat or low-slope roofs and older windows. Those lots often have existing concrete footings, irrigation, and thirty-year-old chain link that needs a clean pull – demo can add half a day on a corner lot. This is also why many Pinewood homeowners pair an iron fence with a rebuilt driveway or hardscape; the same sitework and footing crew that handles Patios, Walkways & Pool Decks in Pinewood runs the fence job, so it’s one mobilization instead of two.
We cover the full Pinewood area, from the 33167 blocks near the Little River up through the west-side lots, and we also serve nearby Westview, Gladeview, West Little River, and Opa-locka. If your iron fence is one piece of a larger property project, it’s part of a full Fence Installation in Pinewood scope, and you can see all of our Fence Installation work on the main service page. For guests and additions, homeowners often pair this with ADU Design & Permitting in Pinewood since both jobs turn on the same wind and floodplan requirements. Learn more about our service area at Pinewood.
Serving Pinewood, FL – Our Local Coverage Area
We serve Pinewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Iron Fence in Pinewood
Most iron fence projects in Pinewood take two to four working days of construction, plus permit review time if your design requires it. A standard 150-foot run with one walk gate is often a three-day job once the permit comes back; a long run with a double driveway gate can stretch to five. Call (833) 968-1198 and we’ll give you a realistic date after the site walk, not a guess over the phone.
It depends on height and whether the fence ties into masonry – a fence with concrete pilasters or over six feet generally needs a Miami-Dade permit and a wind-load submittal, while a plain six-foot aluminum run on a residential lot may not. We tell you in writing at the estimate whether your specific design triggers a filing, and we manage the submittal if it does. Call (833) 968-1198 to find out which side your property line is on.
In most cases, yes. We dig post holes individually rather than trenching, and we keep the footer line tight to the fence run, so a standard install leaves your lawn mostly intact. When the fence crosses an existing concrete walk or apron, we cut it out and repour that section – that’s a separate line item we quote upfront. Call (833) 968-1198 with a rough sketch of the property line and we’ll flag any cutouts.
Most Pinewood installations land between $28 and $52 per linear foot depending on material grade, height, and picket density, with the full project running $3,500 to $9,000. Gates, stepped panels, and footing work in the low water-table blocks push toward the top of that range. Call (833) 968-1198 for an exact per-foot number on your property – estimates are free and on site.
Every Groundwork iron fence is covered by our 730-Day Done Right Promise for workmanship, and the fence material itself carries its manufacturer’s product warranty on the finish and rust resistance. If a post shifts or a panel fails within that window, we come back and fix it. Call (833) 968-1198 to schedule your free estimate and we’ll walk through the coverage before you sign anything.
Get Your Free On-Site Estimate
An iron fence is a footing job before it’s a fence job, and Pinewood’s water table and wind-zone rules make the site walk the most useful five minutes of the project. Call (833) 968-1198 and a live person answers – day, night, or weekend. We schedule a free on-site estimate, measure the full run against your survey, flag any permit or floodplain issue, and hand you a written line-item quote. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and the price we quote is the price you pay.
Written by the team at Groundwork Construction Co.