Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sliding & Patio Doors in Miami, FL: What the Job Actually Involves
Sliding and patio door replacement in Miami typically runs $5,310 to $17,700 for the door itself, with impact-rated units landing at the higher end because Miami-Dade County requires every exterior door assembly to carry a valid NOA (Notice of Acceptance) number. A standard swap is a two-day job; relocating the opening or widening a wall pushes it to four or five days. Call (833) 968-1198 and we’ll walk your opening and give you a written, line-item number before anyone touches a screwdriver.
How We Install or Replace Sliding & Patio Doors, Stage by Stage
Here’s the real sequence, not a brochure version. Five stages, and at each one you’ll know what we’re doing and what you need to decide.
Stage 1: Measure and product approval (day 1, about 90 minutes)
We measure the rough opening, check the sill for rot and the header for sag, and confirm the wall construction – CBS block, wood frame, or the post-2000 curtain-wall assembly you find in Brickell high-rises. Then we pull the NOA documentation for the specific door model you’re buying. If the product doesn’t carry a Miami-Dade NOA number, it can’t be permitted here. You decide the door style and glazing package at the end of this visit.
Stage 2: Permit submittal (day 2 to day 10)
We file with Miami-Dade County’s Building Department, attaching the NOA, the product control drawings, and the installation detail for your wall type. Review times vary with volume, but the review itself is where jobs stall when a contractor submits a national approval instead of a Miami-Dade one. We handle the submittal and the corrections cycle. You don’t have to sit on hold.
Stage 3: Demo and opening prep (day 1 of install, half a day)
Old panel and frame come out, the rough opening gets squared and shimmed, and we inspect for water intrusion at the sill pan – on Miami concrete-block homes, this is where we most often find hidden damage from years of driven rain. Any rot or spalled block gets addressed before the new unit goes in. You’ll get a photo record of what was behind the wall.
Stage 4: Set, anchor, and seal (day 1 into day 2)
The new door gets set plumb, anchored per the NOA installation method, and sealed with a compatible sealant system. Impact glass panels are heavy, so plan on two installers minimum. We test the slide, set the rollers, and adjust the track.
Stage 5: Inspection and final walkthrough (day 2, about an hour)
The county inspector confirms the NOA match and the anchoring. We walk the door with you, demonstrate the lock and screen, and hand over the product warranty and our own written guarantee. This entire sequence is typical for Windows & Doors in Miami projects, so if this is part of a full exterior update, the same crews handle the rest.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Real Options You’ll Choose Between
Sliding and patio door decisions aren’t just aesthetic. In Miami, the product type drives the permit and the price.
- Impact-rated sliding glass (the default choice): Laminated or laminated-plus glass in a heavy frame, tested and NOA-listed. It’s the code-mandated answer for most new openings and it’s the reason prices run high. The trade-off is weight and cost – expect impact units at the top of the range.
- Non-impact sliding with a shutter system: Sometimes permitted on existing openings without a new product approval. Cheaper up front, but you’re managing shutters every storm season. Ask us whether your opening qualifies.
- Frame material – aluminum vs. vinyl vs. fiberglass: Aluminum handles the salt air and intense UV better on exposed elevations; vinyl insulates well but can chalk in direct sun; fiberglass splits the difference and holds paint. In Coral Gables and Coral Terrace’s older CBS homes, aluminum is often the honest recommendation.
- Configuration – two-panel, three-panel, corner, or pocket: Standard two-panel sliders are the least expensive. Multi-panel and pocket doors cost more but open the wall to your patio. Decide based on how you actually use the space, not on the catalog photo.
- Hardware and screen: Roller quality is the difference between a door that glides for 15 years and one that binds in three. We spec stainless rollers in coastal zones. Andersen and Marvin lines both carry Miami-Dade-approved options if you want a known brand behind the glass.
What Sliding & Patio Doors Cost in Miami, FL
For a same-size replacement, budget $5,310 to $17,700 installed, permit included. Impact-rated units and larger openings sit at the top; a basic non-impact swap on an interior-adjacent opening sits near the bottom. Here’s what moves the number:
- Opening size and panel count: A standard 6-foot two-panel slider is the base case. Every additional panel and every foot of width adds cost.
- Glass rating: Impact-rated laminated glass is the biggest single line item. It’s also what the county wants to see.
- Existing condition: Rotted sill pans, spalled block, or a sagging header turn a swap into a repair. We price the repair as its own line so you see it.
- Structural changes: Widening an opening or moving it requires a header and engineering – that’s where costs climb fast. Keep the opening where it is and you stay near the low end.
- Permit and inspection scope: A like-for-like replacement permit is straightforward. A new opening in a 40-year-recertification building may trigger additional structural review.
A written estimate from us lists the door, the NOA number, the install labor, the permit, and the disposal. It does not include hidden change orders – the number you see is the number you pay. If you’re also eyeing exterior hardscape, homeowners often pair this with Paver Driveways in Miami since the same mobilization covers the yard access.
See the difference
Before
After
Before
After
Before
AfterWhat Miami Homes Specifically Do to This Job
Miami-Dade is the only county in the country with its own product-approval system. Every exterior door here needs a Miami-Dade NOA number – a Florida or national approval isn’t enough. That single fact changes the job: it narrows the product list, it drives the permit, and it means a contractor who doesn’t know the difference will have your door rejected at inspection. Add the 40-Year Recertification law (25 years near the coast), and you get a predictable wave of door and window replacements as buildings age into their inspection cycle.
The housing stock matters too. Much of the older inventory is pre-1970s concrete-block and CBS construction with unreinforced masonry, so we routinely find spalled block at the sill and termite damage at wood-framed openings. In 1920s Mediterranean Revival homes, the openings are often irregular – the door has to be custom, not boxed. Along Brickell and Biscayne Boulevard, we’re working on post-2000 high-rise assemblies where the slide track and the balcony drainage interact. Salt air degrades sealants and finishes fast, so we spec coastal-grade hardware and reseal the perimeter on a shorter cycle. We cover all of Miami and the surrounding neighborhoods, and we’ll tell you honestly what your specific building needs.
Serving Miami, FL – Our Local Coverage Area
We serve Miami and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Sliding & Patio Doors in Miami
Plan on two days for a same-size replacement and four to five if the opening is being widened or the wall needs structural repair. Permit review adds a few days on top, and we schedule install once the permit is issued. Call (833) 968-1198 to get a date range for your specific opening.
Yes, exterior door replacement in Miami-Dade requires a permit and a Miami-Dade NOA-approved product. There is no shortcut here that holds up at resale or recertification. We pull the permit and manage the inspection for you.
Yes, in most cases a same-size replacement leaves plumbing and structure untouched. Only if you’re widening the opening does a header and engineering come into play. We tell you upfront which job you’re actually looking at.
Often yes, but you need to submit the product spec and color to the HOA before ordering. We provide the drawings and NOA documentation your board will ask for so the approval doesn’t hold up the job.
Our workmanship is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. Manufacturer warranties ride on top of that for the door and glass. The warranty isn’t fine print; we hand it to you at the walkthrough.
Get a Free Estimate on Sliding & Patio Doors in Miami
Call (833) 968-1198 to schedule a free on-site estimate. We measure the opening, check the sill and header, confirm which NOA-listed products fit your budget, and hand you a written line-item quote – no pressure, no change-order surprises. A live person answers, and the visit costs nothing. If you’re also planning fence work, we handle Fence Repair in Miami on the same trip.
Written by the team at Groundwork Construction Co.