Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Brownsville, FL: What It Involves
A walk-in shower remodel in Brownsville typically runs $9,000 – $28,000 and takes two to four weeks from demo to final inspection, depending on whether we’re relocating the drain and valve. Most of the sub-$12,000 projects are straight replacements in the same footprint; moving plumbing or carving into a load-bearing wall pushes you toward the middle and top of that range. Call (833) 968-1198 and we’ll walk your bathroom and give you a written, line-item number before anyone touches a tile.
How a Shower Remodel Actually Runs, Stage by Stage
Shower work is unforgiving. The order of operations is what keeps a small wet space from turning into a mold problem six months later, so here’s what the calendar looks like.
Stage 1 – Demo and inspection (1 – 2 days). We pull the old surround, pan, and whatever tile is failing, then open the wall behind the valve to see what the last remodel left. In Brownsville CBS homes this is where we find out whether the original drain is cast iron, whether there’s a proper slope under the pan, and whether the studs are true. You decide nothing on day one; we just report back with photos.
Stage 2 – Rough-in and inspection (2 – 3 days). New drain, P-trap, valve, and any electrical for lighting or a vent fan. If we’re moving the shower to a different corner, this is the stage where plumbing and framing happen. This is also where the homeowner makes the two decisions that matter most: drain location and whether the wall gets a niche. The rough-in gets inspected before anything is closed up.
Stage 3 – Waterproofing (1 – 2 days). A bonded waterproofing membrane over cement board, pre-sloped pan, and banded corners and seams. This is the stage that quietly decides whether the shower lasts 30 years or 6. We photograph every layer.
Stage 4 – Tile, glass, and trim (4 – 8 days). Tile setting, grout, then frameless or semi-frameless glass templated and installed. Large-format tile goes faster than mosaic; a bench or a niche adds a day.
Stage 5 – Final inspection and walkthrough (1 day). Flood test documentation, final building inspection, and a walkthrough where we hand over the warranty in writing. Your choices happen mostly in Stage 2 (layout) and between Stages 3 and 4 (tile and glass).
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the money conversation comes down to five decisions. Here’s the honest trade-off on each.
- Pan type – tile vs. prefab. A tiled pan with a linear drain runs $1,500 – $3,500 more than a molded acrylic base but gives you a flush floor and a curbless entry. Prefab pans are faster and forgiving; tile pans look better in a narrow Brownsville bath and hold value.
- Base material – acrylic, cultured marble, porcelain, or natural stone. Acrylic and cultured marble land at the low end of the $4,500 – $12,000 install band and clean up easily. Porcelain is the workhorse. Natural stone costs 30 – 50% more in material alone and needs sealing in our humidity.
- Glass package. A frameless 3/8-inch tempered panel is the biggest visual upgrade and adds roughly $1,200 – $3,000. Semi-frameless is a reasonable compromise when the opening isn’t perfectly square.
- Drain placement. Center drains are cheapest. A linear or offset drain near the wall lets the floor slope away from the entry and works in a tight footprint.
- Ventilation. A properly sized exhaust fan on a timer is the single cheapest thing you can do to protect the waterproofing. We install PGT and CGI impact-rated glass where a window sits in the wet zone, since Brownsville storms are hard on standard glazing.
What Walk-In Showers & Shower Remodeling Costs in Brownsville, FL
Most of Brownsville’s shower projects land between $9,000 and $28,000. That wide range is real, not a hedge, so here’s what actually moves it.
| Scope | Typical range |
|---|---|
| Shower replacement, same footprint | $3,000 – $8,500 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| New walk-in shower installation | $4,500 – $12,000 |
| Full walk-in shower remodel (this page) | $9,000 – $28,000 |
Size. A 3×5 alcove stays cheap; a 5×6 with a bench and two shower heads adds material, labor, and glass area.
Condition behind the wall. In older Brownsville homes we often find a cast-iron drain to replumb or a rotted sill plate from a leak, and each is a real line item.
Moving plumbing or structure. Relocating the drain or cutting into a load-bearing wall is the biggest driver. We need a structural check and possibly a beam; that alone can add $2,500 – $6,000.
Material grade. Porcelain versus natural stone, framed versus frameless glass.
Permit scope. A permit for a full remodel with a new drain and valve runs a few hundred dollars; relocating plumbing or electrical pulls in more inspections. We pull it and get it signed off.
Every written estimate from us is line-item and fixed. The number you see is the number you pay, and the 730-Day Done Right Promise covers the workmanship in writing. Call (833) 968-1198 for a free on-site estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Brownsville Homes Specifically Do to This Job
The housing stock in 33142 shapes this work more than anything else. Brownsville’s blocks are lined with 1940s – 1960s concrete-block and CBS homes, many of them one story, with narrow bathrooms that were sized for a 30-inch tub and nothing more. Walk-in showers & shower remodeling in Brownsville means working inside a 5×7 or 5×8 footprint where a couple of extra inches change every choice. We regularly find original cast-iron drains, walls that were furred out on the old block face, and jalousie window openings that were walled in decades ago and now sit inside or next to the shower. Those openings affect waterproofing and ventilation, so we check them before we quote.
Because many Brownsville lots are infill parcels from past demolitions, a lot of this work turns up in homes that were gutted and rebuilt piecemeal. We confirm the wall and floor structure before demo, not during it, and we usually find at least one bathtub that’s been converted to a shower once already with past waterproofing that needs a full redo. Permitting is straightforward: Miami-Dade requires a permit for any change to the drain or valve, and we pull it, run the flood test, and pass the inspection before the glass goes in. If the project grows into a wider scope, our Bathroom Remodeling in Brownsville covers the rest of the room. We serve every corner of Brownsville, and homeowners often pair this with Roof Replacement & Installation in Brownsville when an older roof is next on the list.
Climate is the other factor. Miami’s summer downpours and hurricane season drive humidity into a wet space fast, so we use mold-resistant board, proper waterproofing, and a sized exhaust fan. If you’re also weighing exterior work, our Metal Roofing in Brownsville is a worthwhile conversation. And when you want the full scope handled by one crew from foundation to finish line, our bathroom remodeling service is the place to start.
Serving Brownsville, FL – Our Local Coverage Area
We serve Brownsville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Brownsville
Plan on two to four weeks from demo to final inspection. A same-footprint replacement is closer to two; moving the drain or adding a bench pushes it to three or four, and glass templating alone takes about a week of lead time. Call (833) 968-1198 for a timeline on your specific bathroom.
Yes, if you’re changing the drain, valve, or electrical. Miami-Dade requires a permit for any plumbing or electrical change, and we pull it, document the flood test, and pass inspection before the glass goes in.
Usually, yes. A same-footprint conversion uses the existing drain and valve location and keeps the job near the $9,000 – $12,000 mark. It’s when we move the drain or open a load-bearing wall that the number climbs.
A conversion swaps a tub for a shower in its footprint for $3,500 – $10,000. A full walk-in shower remodel ($9,000 – $28,000) rebuilds the walls, waterproofing, drain, and glass and can change the layout. We do both.
Our workmanship is covered by the 730-Day Done Right Promise. If the waterproofing or tile fails within two years, we make it right. Call (833) 968-1198 and we’ll walk you through it.
Get a Free Walk-In Shower Estimate in Brownsville
Call (833) 968-1198 to schedule a free on-site estimate for Walk-In Showers & Shower Remodeling in Brownsville. A live person answers 24/7, we walk the bathroom, and we hand you a fixed line-item quote with permits, waterproofing, and glass accounted for. No change orders, no surprise numbers. Most estimates are scheduled within the week.
Written by the team at Groundwork Construction Co.