Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Installation in Miami, FL: What It Takes and What It Costs
Window Installation in Miami generally runs $5,310 to $17,700 for a standard replacement scope, and up to $29,500 when you’re specifying impact-rated units that have to carry a Miami-Dade NOA number. A typical whole-home job takes two to four days on site, with a lead time of four to eight weeks for the order to arrive and be inspected. Call (833) 968-1198 to schedule a free on-site estimate and get a real number for your address.
The problem you’re actually facing before storm season
Most people call us about window installation in Miami for one of three reasons: the glass has gone cloudy or lost its seal, the frames are original aluminum sliders from the 1960s or 70s that rattle in a stiff wind, or they’ve just received an insurance letter or a 40-Year Recertification report telling them the openings need to be brought up to current wind-load standards.
The timing matters more here than in almost any other market. Between June and November, a window that leaks at a corner or a slider that won’t latch tight is a real problem, not a cosmetic one. Salt-laden air off Biscayne Bay eats through cheap hardware and sealant in a handful of years, and once water gets behind a frame, the concrete block around it starts to spall. We see that a lot on older CBS homes in Little Havana and Shenandoah, where the original openings were never designed for the wind pressures the county now requires.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
How a window installation actually runs, stage by stage
Here’s the real sequence, start to finish, so you know what you’re committing to and when.
Stage 1: Site visit and measurement (day 1, about 90 minutes). We measure every opening, check the scope of the existing frames, and look at what’s behind the stucco or block. This is where you decide how far the job goes: replacement of existing openings only, or new openings as part of a larger renovation.
Stage 2: Product selection and documentation (1 to 2 weeks). You pick the product line and configuration. We pull the NOA documentation for the products you chose so the county has what it needs at permit time. This is the single biggest decision point on the job, and it’s the one that sets your price.
Stage 3: Permitting (2 to 6 weeks in Miami). Permit cycles here are not quick, and they’re not optional. We submit the scope, the product approvals, and the wind-load engineering, then manage review comments and any resubmittals. A domestic permit under a Hurricane Mitigation program still has to satisfy the HVHZ product approval requirement.
Stage 4: Installation (2 to 4 days, most homes). Day one is usually demo and frame prep on the ground floor, done room by room so the house stays livable. We remove the old units, check for rot or damage behind the frame, set the new frames, seal, and finish the interior and exterior returns. Most jobs are complete in a single visit per opening, and we keep the work area contained with plastic sheeting and drop cloths throughout.
Stage 5: Inspection and walkthrough. The county comes out for the inspection, and we stay until it passes. Then we walk the whole job with you, check every latch and every seal, and hand over the documentation package, which you’ll want on file for insurance and recertification purposes.
The decisions that shape your window installation order
Unlike a roofing job where the material choice is mostly one decision, windows sit at the intersection of product, code, and appearance. Here’s what you’ll actually be choosing between.
- Impact-rated vs. standard insulated glass. Impact units are the code-compliant answer in the HVHZ and eliminate the need for shutters, but they cost more and add weight to the frame. Non-impact glass is cheaper per unit but usually means you also need shutters or another protection method to satisfy the opening protection requirement.
- Frame material: vinyl, aluminum, or wood-clad. Vinyl is the value option and holds up well in coastal humidity, aluminum suits the Miami Modern and 1920s Mediterranean Revival look better and tolerates salt air, and wood-clad gives you the traditional look with a lower-maintenance exterior face.
- Glazing package. The Low-E coating and argon fill that reduce solar heat gain are worth specifying on south and west elevations. Every unit we quote gets a U-factor and SHGC number so you can compare apples to apples.
- Configuration. Sliders, single- and double-hung, awning, casement, and fixed picture windows. Which way each window opens affects wind-load capacity and price, and the hardware matters more than most people expect on a coastal home.
- Brand line. We work with Andersen and Marvin on the wood-clad and premium side, plus value-tier impact lines that carry the required NOA approvals. We’ll show you the actual spec sheets before you commit, so you’re choosing quality, not just availability.
We keep the number on the quote fixed once the scope is signed. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Window Installation costs in Miami, FL
Most homeowners here land between $5,310 and $17,700 for a standard window installation. A full impact package at the higher end of the range typically comes in between $9,440 and $29,500, depending on the number of openings and the spec you choose.
- Number and size of openings. The single biggest cost driver. A whole-home job on a 1,800-square-foot home runs roughly 12 to 16 openings; a small condo might be 4 to 6.
- Product spec. Impact units, wood-clad frames, and special glazing all push you toward the high end. Vinyl standard units bring the unit cost down but may need separate shutter protection to comply.
- Existing condition. Rot behind the frame, failed stucco, or interior trim that needs repair adds labor. We spot these at the site visit and quote them upfront instead of after demo.
- Opening changes. Straight replacement of an existing opening is one number. Widening a wall or adding a new opening brings structural, framing, and finish work into the scope and changes the permit.
- Permit scope. A single-window permit and a whole-home permit are different documents with different review cycles and different fees.
A written estimate includes the units, installation labor, sealing and flashing, permit submission, and inspection coordination. It typically does not include interior painting or wall finishing beyond the frame return, window treatments, or repair of unrelated stucco or roof issues the site visit uncovers.
What Miami homes specifically do to this job
Miami-Dade County is the only place in the country with its own product-approval system. Every roof, window, and shutter installed here has to carry a Miami-Dade Notice of Acceptance (NOA) number that’s specific to the product, not just a Florida or national approval. That’s an extra paperwork layer most out-of-town window installers run into and then have to fix, which is why we document it at the product-selection stage and not at inspection. Combined with the county’s 40-Year Recertification rule (and 25-year recertification for buildings near the coast), our work is judged on documented wind resistance as much as appearance.
The housing stock makes it personal. Miami is a dense mix of pre-1970s CBS homes with original aluminum openings, 1920s Mediterranean Revival and Miami Modern buildings, and glassy post-2000 high-rises along Brickell and Biscayne Boulevard. We work most often on the older concrete-block homes in Coral Gables, Little Havana, and Shenandoah, where unreinforced masonry and original openings meet modern wind-load requirements for the first time. That’s why our inspections often lead to structural and wind-mitigation upgrades alongside the window work.
Climate adds its own pressure. Year-round humidity and salt air degrade sealant and hardware fast, and hurricane season drives the flood-zone elevation rules and impact-glass requirements code enforcers now expect. If you’re renovating, our Windows & Doors in Miami page covers the full scope, and homeowners often pair this with Wood Fence in Miami or Chain Link Fence in Miami work on the same schedule. Groundwork covers all of Miami and the neighborhoods around it.
Serving Miami, FL – Our Local Coverage Area
We serve Miami and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Window Installation in Miami
Allow two to four days on site for a typical whole-home job, plus four to eight weeks for product lead time and two to six weeks for the permit. The install itself is the shortest part of the timeline by far.
Yes. Any window installation in Miami-Dade requires a permit, and every unit has to carry a Miami-Dade NOA number. We submit the permit and coordinate inspections; that’s included in your written estimate, not billed separately.
In most cases, yes. Straight replacement of an existing opening leaves plumbing and electrical alone. Widening a wall or adding a new opening does trigger structural work, and we scope that at the site visit before you commit.
Standard replacement usually runs $5,310 to $17,700, and full impact packages typically land between $9,440 and $29,500. Call (833) 968-1198 for an exact quote – the estimate is free.
Every window installation is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. Manufacturer warranties on the units and hardware come on top of that and vary by product line.
Free estimate for Window Installation in Miami
Call (833) 968-1198 to schedule a free on-site estimate for window installation anywhere in Miami. A live person answers the line around the clock, so there’s no voicemail black hole and no waiting until Monday. We’ll measure every opening, walk you through the product options and NOA documentation, and leave you with a written line-item quote you can hold us to. This sits inside our broader Windows & Doors service, and the estimate costs you nothing.
Written by the team at Groundwork Construction Co. of Miami.