Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Miami Homeowners Choose Therma-Tru Construction
We provide independent Therma-Tru door installation, repair and replacement service throughout Miami, working on Fiber-Classic, Smooth-Star, Pulse and older Legacy doors every week. What sets our Therma-Tru work apart is that we troubleshoot the brand’s specific sills, sweeps, multipoint hardware and finishes instead of treating a door like a generic slab. Groundwork Construction Co. of Miami is an independent service provider. We are not affiliated with, authorized by, sponsored by or endorsed by Therma-Tru. That independence is why we can tell you honestly when a $40 sweep solves your problem and when it doesn’t. Call (833) 968-1198 for a free estimate.

Why Trust Groundwork Construction Co. of Miami for Your Therma-Tru Construction?
Our technicians have up to 12 years of experience, and a lot of that time has gone into fiberglass and wood-edge door systems like the ones Therma-Tru builds. That means we know a Fiber-Classic adjustable sill not because we read the install manual once, but because we’ve pulled worn sill caps out of enough storm-facing openings to recognize the failure on sight. We know why a Smooth-Star multipoint lock stops lining up after the slab settles. We know that a bubble in the paint on a south-facing Pulse door skin usually signals a deeper moisture problem, not a paint problem.
We source genuine Therma-Tru sills, sweeps, weatherstrip, hinge kits and multipoint hardware because generic aftermarket parts fit poorly on Fiber-Classic and Smooth-Star frames and tend to fail again within a season or two. When we swap a component, we work in a way that keeps your manufacturer’s warranty intact, and we document what we did. Every project we complete is backed by our 730-Day Done Right Promise. If it’s not done right, we make it right. From foundation to finish line, you have one contractor to call, and calls are answered by a live person 24 hours a day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Fix in Miami
Miami’s salt-laden coastal air, year-round humidity and wind-driven rain are brutal on exterior doors, and Therma-Tru systems show it. These are the failures we see most.
- Fiber-Classic sill and threshold leaks. The adjustable sill and sweep on a Fiber-Classic entry door wear down over time. Once that sweep loses its seal, wind-driven Miami rain reaches the threshold and eventually the subfloor. Homeowners usually notice dark staining on the floor tile inside the door before they notice anything wrong with the door itself.
- Skin cracking and finish blistering on south- and west-facing doors. Factory paint on fiberglass skins breaks down under intense UV, and salt air speeds the process. Pulse and Smooth-Star doors on the sun-facing side of a home blister first, and a crack in the skin lets moisture in behind the finish.
- Multipoint lock and deadbolt misalignment on Smooth-Star patio doors. As the slab settles or the hinge-side frame shifts, the lock no longer reaches its strike. The door pulls shut but won’t latch, or the handle fights you. This is a frame-alignment problem, not a broken lock, and treating it as a lock problem wastes money.
- Corroded and seizing aluminum sill tracks, sweeps and weatherstrip. Salt air pits aluminum and stiffens rubber. Tracks gum up, sweeps harden into place, and the door starts dragging. If you’re near the coast, this happens faster than most owners expect.
- Water wicking into Legacy wood-edge bottom rails. The wood-edge Legacy doors from older installations draw moisture up into the bottom rail. The slab swells, the veneer delaminates, and rot sets in around the lock block. By the time paint bubbles, the damage is usually structural to the slab.
A typical Therma-Tru call starts with a homeowner noticing water staining on the floor inside a Fiber-Classic entry door, or a Smooth-Star patio door that sticks and won’t latch come summer. The usual cause is a worn or improperly sealed adjustable sill and sweep, or a frame that has shifted so the multipoint lock no longer lines up, letting Miami wind-driven rain and humidity into the opening. A qualified local pro diagnoses the sill, frame and hardware, replaces the failed OEM sweep, sill cap or lock components, reseals the threshold, and checks the rough opening for water damage before deciding whether the door can be saved or the slab and frame need replacing.
Therma-Tru Parts & Our Repair-vs-Replace Approach
Parts choice is where a lot of Therma-Tru repairs go wrong the first time. We lean on genuine Therma-Tru sills, sweeps, weatherstrip, multipoint hardware and hinge kits because generic aftermarket pieces don’t seat correctly on Fiber-Classic and Smooth-Star frames. A sweep that’s a millimeter off lets water in and the problem returns. We source the right part for each job rather than relying on a pre-stocked inventory, so the component matches your door’s series and age.
Repair or replace is a judgment call, and we make it honestly. A single failed component, whether a sweep, a sill cap or a lock cartridge, is almost always a repair. A door with a rotted bottom rail, a delaminated skin or a cracked slab is a replacement conversation, and we say so plainly rather than patching a door that won’t last another storm season. Our technicians have up to 12 years of experience reading exactly that line. Call (833) 968-1198 for a free estimate on your Therma-Tru door.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We inspect the door slab, sill, sweep, frame and lock, then check the rough opening for water damage. On a Fiber-Classic, that means testing the adjustable sill and looking under the threshold. On a Smooth-Star, it means checking frame plumb and the multipoint strike alignment.
- 2
Repair or installation. For repairs, we install genuine Therma-Tru components and reseal the threshold. For replacements, we set the new slab or door unit square, shim the frame correctly and flash the opening so Miami rain stays out.
- 3
Test. We operate the door through its full swing, verify the multipoint lock and deadbolt engage cleanly, and confirm the sweep seals against the sill. Then we water-test the threshold where access allows.
- 4
Warranty and handoff. We document the work and parts, explain what to watch as the season changes, and back the project with our 730-Day Done Right Promise. If anything we touched isn’t right, we return and make it right.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Miami
We work on the Therma-Tru lines most common in Miami homes. That includes Fiber-Classic and Fiber-Classic Oak collection entry doors, Smooth-Star fiberglass entry and patio doors, Pulse and Pulse Framed collection entry doors, and the older Legacy wood-edge and steel-edge entry doors still installed across the area. Sidelight systems and the hardware that ties them together are part of the scope. Whether your door is a recent install that won’t latch right or a Legacy unit with a soft bottom rail, we diagnose the specific series and fault rather than guessing. If you’re unsure which line you have, the door’s markings and hardware style usually tell us.
We Also Service These Brands
Therma-Tru is one piece of the work. Our curated roster of material brands runs across every trade we handle, from KraftMaid and Cambria in kitchens to Silestone and Kohler in baths. That means when a Therma-Tru door replacement lands inside a larger kitchen or bathroom scope, we coordinate the whole job with one contractor and one written estimate. No vendor handoffs, no gaps between trades.
FAQs – Therma-Tru Construction Service in Miami
No. We are an independent service provider and are not authorized, sponsored or endorsed by Therma-Tru. We work on Therma-Tru doors because we know the product line, not because the manufacturer certifies us. Our credentials rest on our own workmanship and our 730-Day Done Right Promise.
Yes. For sills, sweeps, weatherstrip, multipoint hardware and hinge kits, we source genuine Therma-Tru components. Aftermarket generic parts fit poorly on Fiber-Classic and Smooth-Star frames and tend to fail again quickly, so the savings don’t hold up. We source the correct part for your specific series and age.
Most single-component repairs, like a sweep, sill cap or lock cartridge, finish in a single visit. Door slab or full-unit replacement depends on the opening, water damage found and whether a permit is required, so we give you a realistic timeline in the written estimate before work starts. Call (833) 968-1198 to schedule your free estimate.
We cover Fiber-Classic and Fiber-Classic Oak entry doors, Smooth-Star fiberglass entry and patio doors, Pulse and Pulse Framed entry doors, and Legacy wood-edge and steel-edge entry doors from older installations. Sidelight systems and the associated hardware are included.
Not when the work is done correctly with genuine parts and proper sealing. We work in a warranty-safe way and document what we install. If a manufacturer’s warranty question comes up, you’ll have a clear record of the components and the work performed.
Door service is usually a modest line item inside a larger scope. In Miami, a full kitchen remodel runs $16,520 – $53,100, a full bathroom remodel runs $10,620 – $33,040, and a home addition runs $53,100 – $153,400, with the Therma-Tru door replacement priced as part of that work.
| Project | Price Range |
|---|---|
| Home Addition | $53,100 – $153,400 |
| Kitchen Remodel | $16,520 – $53,100 |
| Bathroom Remodel | $10,620 – $33,040 |
Call (833) 968-1198 for an exact quote on your Therma-Tru door and the surrounding scope. Estimates are free, and the number you see is the number you pay.
Book Your Therma-Tru Service in Miami, FL
Whether it’s a Fiber-Classic sill that’s letting water in or a Smooth-Star patio door that won’t latch, we diagnose the real cause and give you a written, upfront estimate. As an independent Therma-Tru service provider in Miami, we work on the brand’s specific hardware and finishes and back the job with our 730-Day Done Right Promise. Call (833) 968-1198 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Miami.