Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Fountainebleau, FL
We provide independent Dvele service across Fountainebleau, FL: site work, foundations, utility tie-ins, assembly coordination, and finish scopes for Dvele’s factory-built modular homes. The one thing that sets our Dvele work here apart is the inspection environment itself. Fountainebleau’s 33172 corridor sits in unincorporated Miami-Dade, where the county’s product-control (NOA) system governs every hurricane-rated window, door, and connection on a modular assembly. That paperwork is stricter than in most neighboring jurisdictions, and it shapes how a Dvele home gets permitted and inspected here. We are an independent local builder, not affiliated with, authorized by, or warranted by Dvele. Call our live team at (833) 968-1198 to schedule a free estimate.

Key takeaways:
- We handle the site-to-module interface, which is where most Dvele problems begin.
- Miami-Dade NOA documentation is a planning requirement here, not an afterthought.
- All our work is covered by the 730-Day Done Right Promise.
- Both our crew and its technicians (up to 12 years of experience) know Dvele’s assembly tolerances and documentation requirements.
Why Fountainebleau Residents Choose Us for Dvele Service
Dvele builds a different kind of house. Its LUMEN series, Q module platform, steel-and-panel wall system, and ADU modules arrive on a lot as factory assemblies with their own tolerances, connection details, and published documentation. Building next to that takes a contractor who reads the assembly drawings instead of guessing from wood-frame habits.
We do. Our technicians have up to 12 years of experience, and we work around the realities of Fountainebleau lots: tight access off the commercial corridors, concrete-block neighbors, and an inspection desk that wants to see Miami-Dade NOA numbers before anyone sets a module. We’re licensed and insured, and we work from written line-item quotes with fixed pricing, so you see the full number before work starts.
Parts matter too. Module-specific hardware and connection kits come from Dvele or its designated suppliers so the factory assembly rating stays intact. For a full picture of what we handle on the brand side, see our Dvele service overview.
Calls are answered by a live person 24/7, and every technician who arrives on your property is background-checked and in uniform. If you’ve been burned by a bid that grew legs halfway through, that matters more than a brochure.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Solve in Fountainebleau
Here’s what we actually get called out for on Dvele projects in Fountainebleau, and why each one shows up.
- Foundation and anchor bolt layout built to the wrong tolerances. It’s common to see crews pour to older wood-frame habits, not Dvele’s steel-frame module tolerances. The result is set-down misalignment, shimmed gaps, or post-tension slab conflicts that show up the day the module lands. We survey and build the slab to the assembly drawings first.
- Water intrusion at module-to-module and module-to-roof joints. This is the highest-risk detail in any Dvele build. Factory gaskets and site-applied sealants meet South Florida sun and wind-driven rain, and UV degrades them fast. We reseal and re-flash to the manufacturer’s detail before storm season.
- Stucco and weather-barrier tie-in at module seams. Stucco-over-CMU crews unaccustomed to panelized joints leave cracking and moisture paths along the seam line. We coordinate the barrier transition carefully so the seam behaves like one wall, not two.
- Hurricane-rated component documentation gaps. Dvele’s factory-listed assemblies require Miami-Dade NOA product control for windows, doors, and connections. Mismatched substitutions stall recertification and inspection, and a stalled inspection holds up your certificate of occupancy.
- Balcony, railing, and window-perimeter repairs on older buildings with new Dvele additions. Where a Dvele ADU or addition meets an existing 1970s-2000s concrete-block structure, the old perimeter work becomes part of the new scope. We treat it as one job.
Dvele Service in Fountainebleau: What Local Conditions Mean for Your Equipment
The defining fact for a Dvele build in Fountainebleau is this: 33172 is unincorporated Miami-Dade, and the county runs its own product-control (NOA) system for hurricane-rated materials that is more paperwork-heavy than most neighboring jurisdictions. Every factory-listed window, door, and structural connection on a Dvele assembly has to clear that system before it passes inspection. So the permitting and document trail is not a formality tacked on at the end; it shapes how the project is sequenced from day one. A substitute window that looks right but lacks the matching NOA number can stall an entire module close-out. And because Fountainebleau’s housing stock is overwhelmingly concrete-block and masonry with flat or low-slope roofs, the roof-to-wall detail on a Dvele module meets stucco, not wood siding – so the barrier transition needs the careful work we described above. Get that interface and the NOA paperwork right, and the rest of the build follows. Skip either one, and you’re chasing leaks and red-tagged inspections.
Dvele Models & Products We Service in Fountainebleau
We cover the Dvele lines you’re most likely to see on a Fountainebleau lot: the LUMEN series net-zero-ready modular single-family home, the configurable Q module platform, the high-performance steel-and-panel modular wall system, and Dvele’s ADU modules. On the parts side, we keep the split honest. Module-specific hardware, gaskets, and connection kits come from Dvele or its designated suppliers so the factory assembly rating and documentation stay intact. Standard finish items – railings, trim, tile, and fixtures – can use quality aftermarket equivalents as long as they carry the required Miami-Dade NOA. We don’t claim local stock of Dvele parts; we source them per job, which keeps pricing transparent and avoids substitutions just to move a schedule. When the question is repair first, we repair the joint and site interface before anyone talks replacement.

See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Fountainebleau
Here’s the cost picture for the scopes we handle around a Dvele build in Fountainebleau. These are market ranges, and your free estimate gives you the exact line items in writing.
| Scope | Typical Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
| Metal Roof Installation | $15,000 – $40,000 |
What drives the number is the site and the paperwork. A tricky foundation, a post-tension slab conflict, and the NOA documentation load all add cost and time. Your estimate includes a site review, the scope written line by line, and a fixed price with no change orders. Call (833) 968-1198 for an exact quote – estimates are free.
Serving Fountainebleau, FL – Our Local Coverage Area
We serve Fountainebleau and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Fountainebleau
Can a Dvele modular home be built on a typical Fountainebleau 33172 lot? Yes, with the right planning. The key constraints are access, the foundation, and clearing Miami-Dade NOA documentation for the hurricane-rated windows and connections. We assess the lot and the barrier details before scheduling. Call (833) 968-1198 to talk through your lot.
Does Dvele’s factory weather barrier meet Miami-Dade hurricane requirements? It can meet them, but the barrier and connections must be backed by the matching NOA documentation for this jurisdiction. The factory assembly is only half the story; the site-applied tie-ins and flashing have to be detailed to the code. We verify documentation before work starts.
Who handles the module-to-module joints and roof flashing on a Dvele installation? A qualified local team handles them, and it should be someone who knows panelized detailing, not just CMU stucco. These joints are where wind-driven rain finds its way in. We seal and flash to the manufacturer’s assembly detail and pressure-check before storm season. Call (833) 968-1198 to schedule an inspection.
Can I add a Dvele ADU to a Fountainebleau property? Often yes. Dvele’s ADU modules fit many lots here, but setbacks, access, and NOA compliance decide the specifics. An ADU typically runs $90,000 – $220,000, and your free estimate pins down the exact figure. Call (833) 968-1198 for a quote.
Are you authorized or endorsed by Dvele? No. We’re an independent local builder, not affiliated with, authorized by, or warranted by Dvele. We handle the site work, foundations, utility tie-ins, assembly coordination, and finish scopes around a Dvele home. All our own work carries the 730-Day Done Right Promise.
Service Areas Near Fountainebleau
We work across western unincorporated Miami-Dade and the surrounding communities, including our Fountainebleau service area. That puts us in Miami, Brownsville, Miami Springs, Olympia Heights, and Coral Terrace regularly. If you’re on the edge of any of these, call and we’ll confirm coverage.
Book Your Dvele Service in Fountainebleau Today
Ready to price your Dvele project? Call (833) 968-1198 and a live person picks up. We’ll schedule your free estimate, walk the lot, and put the scope and price in writing – backed by the 730-Day Done Right Promise. We also offer $1,000 off projects over $10,000 and 0% financing for 18 months.
Written by the team at Groundwork Construction Co. of Miami.