Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Coral Gables, FL: What the Job Actually Involves
Paver driveways in Coral Gables typically run $7,000 – $18,000, and most residential installs take 3 – 5 working days once design review clears. The job means tearing out the old surface, rebuilding a compacted base to Florida Building Code standards, laying pavers on a proper bedding course, and finishing the edges and drainage so South Florida rain runs off instead of pooling. Call Groundwork Construction Co. of Miami at (833) 968-1198 for a free on-site estimate. We quote upfront and the number you see is the number you pay.
Stage by stage: how our paver driveway installs actually run
We don’t hand you a vague “we handle everything” line. Here’s the real sequence. Our technicians have up to 12 years of experience, and every project is backed by the 730-Day Done Right Promise.
Stage 1 – On-site measure and design review (1 – 2 visits). We measure the drive, check slope and drainage, and talk through paver style, color, and border pattern. In Coral Gables this is also where we identify whether a new front drive triggers Board of Architects review. You decide the paver family and finish here, because the sample needs to match the house.
Stage 2 – Demolition and haul-off (1 – 2 days). The old surface comes out, whether that’s cracked concrete, worn asphalt, or failing pavers. We remove the debris, expose the subgrade, and confirm what’s underneath. Coral Gables driveways on older lots sometimes reveal buried root systems or old utility runs, and you’ll want to know before the base goes down.
Stage 3 – Base prep and compaction (1 – 2 days). This is the stage that decides whether your pavers stay flat for the next 20 years. We build a compacted aggregate base, set grade for positive drainage away from the house, and install edge restraint. You don’t have to decide anything here, but you should watch the compaction passes; a contractor who skips this step is building a driveway that will settle.
Stage 4 – Paver setting and cutting (1 – 2 days). We lay the pavers, cut edge pieces, install the border, and sweep joint sand. You confirm the pattern reads the way it did on the sample board before we finish the field.
Stage 5 – Final compaction, clean-up, and walkthrough. We run a final plate pass, clean the surface, and walk the drive with you. That’s the moment to flag anything. If something needs correction, the 730-Day Done Right Promise means we come back and fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll be choosing between
Paver driveways aren’t one product. The choices below are the ones that actually move how yours looks and performs.
- Concrete pavers (interlocking). The workhorse. Dense, colorfast, holds up to South Florida sun, easy to lift and reset if a line ever shifts. Best value at the lower end of the price range.
- Clay brick pavers. The right call for a Mediterranean Revival or Mission-style home. Warm color, real terracotta character, and it ages well, but it costs more and some clay runs are less consistent than concrete.
- Travertine or shell-stone pavers. Cool underfoot and a natural match for coral rock and stucco facades. Beautiful, but premium-priced and wants a sealer in our climate.
- Permeable pavers. Open-graded joints that let heavy rain percolate. Worth the extra cost on drives with tight drainage or low slope.
- Herringbone vs. running bond vs. basketweave. Herringbone is the strongest pattern under tire load; running bond is quieter visually and cheaper to lay. Border and soldier course add cost and definition.
- Colors and finishes. Tumbled (softer, older look) vs. straight-edge (cleaner, more modern). Match adjacent patio or walkway so the property reads as one design.
Belgard is one of the paver lines we work with most, and we can pull samples so you’re deciding against the actual house instead of a photo.
What paver driveways cost in Coral Gables, FL
Expect $7,000 – $18,000 for a full paver driveway installation in Coral Gables. A sealing pass on top, if you want one, runs $250 – $700. Here’s what moves the number inside that range:
- Size and geometry. A standard two-car drive sits near the bottom; a long estate drive with curves, aprons, and a turnaround pushes toward the top.
- Existing surface and subgrade. Straight pavers-over-base is the cleanest case. Demo of thick old concrete, root removal, or subgrade repair adds days and dollars.
- Paver material. Concrete paver lines sit lower; travertine and clay push the upper end.
- Drainage work. Adding a drainage strip, trench drain, or regrading the drive to move water away from the house adds scope.
- Permitting and design review. Coral Gables exterior work goes through the city’s design-review process, and the submittal and approval cycle is real time and cost.
A written estimate from us is line-itemed: pavers, base, cutting, haul-off, permitting, and any drainage. What typically isn’t included: landscape repair along the drive edges, irrigation line relocation if your sprinkler crosses the drive, and gutter or downspout extensions. We flag those before the job starts so they aren’t surprises. Upfront pricing, no change orders. Call (833) 968-1198 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Coral Gables homes specifically do to this job
Coral Gables is one of the most architecturally regulated cities in the country. The Board of Architects reviews exterior changes under the city’s Mediterranean Revival design code, and that includes paver driveway replacement in many cases. If you’re in the 33114 ZIP or anywhere near the historic core, expect a submittal cycle with design-review approval before pavers go down. Contractors who don’t know the process lose weeks. We plan for it up front.
The housing stock matters too. Much of Coral Gables is 1920s Mediterranean Revival and Mission-style homes, many with coral rock (oolitic limestone) construction from George Merrick’s original planned community. That means driveway work often touches masonry, terracotta, and historic-sensitive edges rather than clean wood-frame transitions. The dominant failure we see is water: hurricane-season rain (June – November) plus a flat, low-slope drive with poor grading leads to settlement, sand loss, and weed joints. We grade the base for positive drainage from the start.
If the project expands past the drive, paver work is often part of a full Driveway & Pavers in Coral Gables scope, and homeowners often pair this with an ADU Design & Permitting in Coral Gables project or a Garage Conversion ADU in Coral Gables when the drive becomes the new front approach. We handle Driveway & Pavers across Coral Gables, plus the surrounding area including Glenvar Heights, South Miami, and Coral Terrace.
Serving Coral Gables, FL – Our Local Coverage Area
We serve Coral Gables and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Paver Driveways in Coral Gables
Most residential installs take 3 – 5 working days of on-site work once permitting and design review clear, and design review is the wildcard. From first call to finished drive, plan on a few weeks rather than a few days. Call (833) 968-1198 for a timeline against your specific project.
Usually yes, and in Coral Gables many exterior changes also go through the Board of Architects. The city’s design code is strict and applies to driveways, front doors, and even paint colors. We pull the permits and handle the submittal so you’re not chasing approval cycles. Call us to talk through your specific lot.
Almost always. A paver driveway is a surface-level job: demo, base, pavers. The only exception is a buried irrigation or utility line that crosses the drive, which we flag during the on-site measure. Your house stays intact. Call (833) 968-1198 to schedule the free estimate.
Paver driveways here run $7,000 – $18,000, with the low end for a simple concrete-paver install and the upper end for a larger drive with premium stone and drainage work. Permitting and design review are part of the number. Call (833) 968-1198 for an exact quote.
Every project is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s a written workmanship guarantee, not verbal. Call for details on materials coverage alongside it.
Get a free paver driveway estimate in Coral Gables
Call Groundwork Construction Co. of Miami at (833) 968-1198 to schedule a free on-site estimate for paver driveways in Coral Gables. A live person answers around the clock. On the call we’ll confirm your address, walk through what you’re picturing, and set a visit so we can measure, check drainage, and talk through design-review requirements. We bring sample boards and leave you with a line-itemed written estimate. No pressure and no obligation.
Written by the team at Groundwork Construction Co.