Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Westview, FL: What It Costs and What It Takes
Walk-in showers & shower remodeling in Westview, FL is a $9,000 – $28,000 job, and a typical full rebuild runs 2 – 3 weeks on site once materials are in hand. A straightforward curbless conversion with tile and a frameless glass panel sits closer to the bottom of that range; a larger custom shower with a bench, niche, linear drain and higher-grade tile sits near the top. Call (833) 968-1198 for a free on-site estimate with a written, line-item price.
How a Westview walk-in shower goes from demolition to first drip
Here’s the real sequence, day by day, so you know what you’re paying for and when you have to make a decision.
Stage 1: Demolition and tear-down (day 1)
We pull the old tile, shower pan, wallboard and any tub surrounding, down to the studs and framing. On a Westview concrete-block home, that means we’re often cutting back to masonry with furring strips, which takes a little longer than a drywall tear-out. You’ll have decided by now whether the shower stays in the same spot or moves, because that single answer changes everything downstream.
Stage 2: Rough-in plumbing and the pan (days 1 – 2)
If the drain stays put, this is quick. If you’re moving the valve, the drain, or adding a bench that needs a new curb height, we open the floor and wall where plumbing has to travel. This is the stage where a surprise (old cast iron drain, undersized supply lines) shows up, and it’s the one you should ask about in the estimate. Decide now on valve brand, position of the hand sprayer and any niche.
Stage 3: Waterproofing and substrate (days 2 – 4)
This is the stage most shower failures trace back to, so we don’t rush it. We build the sloped pan, set the drain, and apply a bonded waterproofing membrane with all seams and fasteners sealed. The substrate sits and cures before a single tile goes up. You don’t have to make decisions here, but you should look at it if you want to.
Stage 4: Tile and glass (days 5 – 10)
Large-format porcelain and rectified tile take longer to set than a 4×4 ceramic sheet. Curb, niche edges and the shower bench get fabricated and wrapped. Glass gets templated after tile is set, then installed a few days later once the shower has cured and the wall isn’t a moving target. This is the point where your tile and grout choice (from stage 1) is locked in.
Stage 5: Fixtures, seal, and final walkthrough
Showerhead, valve trim, drain cover, sealant at the perimeter, and a full test run. We run water, check slope, confirm the drain doesn’t pool, and walk you through maintenance. The whole job closes out with a written sign-off and our 730-Day Done Right Promise, which covers workmanship for two full years.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually compare for a Westview shower rebuild
The choices below are the ones that move both the look and the number. They’re genuine trade-offs, not one right answer.
- Tile format. Large-format porcelain (12×24 or 24×48) grouts faster and looks cleaner, but the substrate has to be flatter and it costs more in labor per square foot. Smaller ceramic is more forgiving and cheaper, but more grout lines and more maintenance.
- Waterproofing system. Liquid-applied membrane is common and affordable; sheet membrane and foam-board systems cost more but are more predictable on a long, flat run. This is also the single biggest determinant of how long the shower lasts.
- Linear vs. center drain. Linear drains look modern and slope better with large tile, but they add cost. Center drains work fine with smaller tile and cost less.
- Curbless vs. low curb. A true zero-threshold entry is best for accessibility but increases the floor-recess work. A low 3 – 4 inch curb is standard and cheaper.
- Glass. Frameless 3/8-inch tempered glass is the step up; a semi-frameless 1/4-inch panel is a real cost saver and still fine for a smaller opening.
- Bench and niche. A built-in masonry bench and a recessed niche both add framed work and cost, but both are worth it in daily use.
Brand partners we regularly work with include Kohler for valves and trim, which matters for parts availability years from now, and Boral for exterior-adjacent trim and finishing pieces on homes where the shower backs onto an exterior wall. Pick the system you can afford to do right, not the one with the lowest tile price.
What Walk-In Showers & Shower Remodeling costs in Westview, FL
Here’s the honest range: $9,000 to $28,000 for the full job in Westview. The short list of everything that pushes a job from the low end to the high end:
- Size and configuration. A 36×48 inch shower stays at the bottom; a 60×60 with a bench and two walls of glass trends toward the top.
- Existing condition. Old cast-iron drains, water-damaged furring strips and stucco-backed block walls all add demo and rebuild time.
- Plumbing or electrical relocation. Moving the drain or the valve, or adding a vent fan and light, is the single biggest variable beyond tile grade.
- Material grade. Standard porcelain and semi-frameless glass keep you low; large-format slab, frameless 3/8-inch glass and a custom bench push you up.
- Permit scope. A tile-only replacement is handled differently from a job that moves plumbing or changes the shower footprint, which requires a Miami-Dade County permit and inspection.
A written estimate itemizes demo, rough-in, waterproofing, tile, glass and fixtures as separate lines so nothing gets buried. What’s usually not included: moving walls, replacing a section of failing block, or code upgrades discovered once we open the wall. We price those before touching them, and with our upfront pricing, the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Westview homes specifically do to this job
Westview is unincorporated, which means permits run through Miami-Dade County, not a city building department. That’s usually a straightforward process, but it adds a step homeowners used to a city counter don’t expect, and the inspection timeline matters on a job where we’re waiting to close the wall before tile.
Most of the homes we work on here are 1950s – 1970s concrete-block single-family homes, often a block or two from Pinewood and Gladeview, with older plumbing behind the tile and furring strips over masonry on the interior walls. Rebuilding a shower in that construction means drilling into solid block and re-flashing around the new drain, not just setting tile on drywall. The subtropical climate and year-round humidity are the reason we don’t shortcut the waterproofing stage: showers fail when moisture creeps behind the tile, and that’s true in every Westview home regardless of age.
If the shower is part of a wider interior renovation, it’s often scheduled alongside the rest of the work, and it’s part of a full Bathroom Remodeling in Westview when the scope grows. Homeowners here sometimes pair the interior work with exterior upgrades; jobs often run next to a Roof Replacement & Installation in Westview or a Metal Roofing in Westview project when a storm has started a chain of repairs. We cover the whole Westview area, and our bathroom remodeling service handles the rest of the bathroom work.
Serving Westview, FL – Our Local Coverage Area
We serve Westview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Walk-In Showers & Shower Remodeling in Westview
Plan on 2 to 3 weeks on site for a typical rebuild, plus a week or more before that for material lead times. Tile and glass have the longest delivery windows, so decisions made at the start are what keep the schedule on track. We give you a written start and finish date before work begins; call (833) 968-1198 if you want that walked through in person.
Yes, if the job moves plumbing, changes the shower footprint, or updates electrical for a new fan or light. Tile-only replacement on the same footprint can often proceed without a plumbing permit, but the safe answer in unincorporated Westview is to check with Miami-Dade County before starting. We pull what the scope requires and pass the inspection.
Yes, in most cases. A same-footprint rebuild that keeps the drain and valve in place is the most affordable path and skips the floor-opening step. That’s the version that lands closer to the lower end of the $9,000 – $28,000 range. If you want a bigger footprint or a curbless entry, expect the plumbing to move and the price to climb.
The range is $9,000 to $28,000 for a full rebuild, with a same-spot tile-and-glass shower at the lower end and a larger custom job with bench and frameless glass at the top. Tile grade, glass thickness, drain type and plumbing relocation are the four biggest multipliers. For an exact number on your Westview home, call (833) 968-1198; estimates are free and itemized.
Every job is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right, for two full years. Our technicians have up to 12 years of experience and arrive background-checked and in uniform, and every project gets a final sign-off with you on site.
Get a free written estimate for your Westview walk-in shower
Call (833) 968-1198 and we’ll schedule a free on-site estimate at a time that works for you. The call is a live person, any hour, every day. We’ll look at the existing shower, talk through the layout and finish options, and leave you with a written line-item price and a start-to-finish schedule. No voicemail, no vague bid, and no surprises once work starts.
Written by the team at Groundwork Construction Co.