Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Pinewood, FL: What It Costs and How Long It Takes
Walk-In Showers & Shower Remodeling in Pinewood, FL runs $9,000 – $28,000 for a full project, and a straight walk-in shower install alone lands at $4,500 – $12,000. Most jobs take two to four weeks from demo to final inspection, longer if we’re opening walls in a 1950s concrete-block home. Call (833) 968-1198 and we’ll walk your bathroom and put real numbers in writing, free.
How We Run a Shower Project, Stage by Stage
Every walk-in shower we build in Pinewood follows the same sequence. Here’s what actually happens, in order, so you know what you’re deciding and when.
- Stage 1: On-site measure and design (1 – 2 days). We confirm the footprint, find where the drain and supply lines sit, and check whether the existing pan is set on a slab or a wood subfloor. You pick the pan size (typically 48×36, 60×36, or a custom 60×42) and the glass type here, because those two choices drive everything downstream.
- Stage 2: Permits and demo (2 – 4 days). We pull the permit with Miami-Dade County and remove the old shower, tile, and backer. On a mid-century block home, this is when we find out how much of the wall is sound and how much rotted framing sits behind the tile. You don’t decide anything here; we document it with photos and adjust the scope in writing before we go further.
- Stage 3: Rough-in and waterproofing (3 – 5 days). Plumbing gets moved if you’re relocating the drain or adding a bench, then we build the waterproof layer. We use a bonded sheet membrane system (Schluter is what we specify most) because it handles the humidity swings of a South Florida interior far better than a painted-on coating. This is the stage that gets inspected. Nothing gets covered until that inspection passes.
- Stage 4: Tile, pan, and fixtures (4 – 7 days). Wall tile, floor tile, niche, and the trim kit. You’ve already chosen the tile and the fixture finish; this is the work itself. Mud-set or curbless pans take an extra day because the slope has to be exact.
- Stage 5: Glass, trim, and final walk (1 – 2 days). Frameless glass gets templated after tile and installed a few days later, since it’s cut to the finished opening, not the rough one. Final inspection, then we walk it with you and check every drain, valve, and seal.
Total: two to four weeks of active work, plus the glass lead time. The homeowner’s real decisions land in stages 1 and 2, and there are only a handful of them.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
A shower remodel is a stack of small decisions, and each one has a trade-off. Here’s how we’d frame the ones that come up most in Pinewood.
- Pan style: prefab vs. mud-set vs. curbless. A prefab pan keeps the cost at the low end and goes in fast. A mud-set tile pan costs more and takes longer but gives you any size and a flush finish. Curbless looks best and works for aging-in-place, but it requires cutting the slab and re-sloping the drain, which is where the budget climbs.
- Wall material: porcelain tile vs. large-format slab. Porcelain is durable, forgiving, and easy to source. Large-format slab panels cut grout lines to near nothing and wipe clean in seconds, but they cost more and need precise walls behind them – a real factor in older block homes where nothing is perfectly plumb.
- Fixture brands: Delta vs. American Standard vs. Toto. Delta is the reliable middle of the road with easy-to-find cartridges. American Standard gives you solid value on the entry tier. Toto is worth the premium if you want the longevity and the finish holding up over years of humidity.
- Glass: framed vs. semi-frameless vs. frameless. Frameless is the look everyone wants and it costs the most, since each panel is custom-templated. Semi-frameless is the honest middle choice and holds up well in a humid bathroom.
- Drain and waterproofing. Linear drains look clean and drain fast but cost more than a center drain. A bonded membrane behind everything is non-negotiable in this climate – it’s what keeps moisture out of the wall cavity.
What Walk-In Showers & Shower Remodeling Costs in Pinewood, FL
Plan on $9,000 – $28,000 for the full project, with a walk-in shower install at $4,500 – $12,000 and a shower replacement at $3,000 – $8,500. A tub-to-shower conversion runs $3,500 – $10,000 if that’s part of your scope. These are the ranges we hold to in writing.
Here’s what pushes a job toward the top or bottom of that band:
- Size and layout. A standard 60×36 alcove keeps you near the floor. A custom footprint or an added bench and niche adds several thousand.
- Existing condition. This is the biggest wildcard in Pinewood’s 1950s – 60s block homes. Rotted framing, failed old waterproofing, or a pan set wrong decades ago all mean more tear-out and rebuild.
- Moving plumbing or electrical. Relocating the drain means cutting into a slab. Adding a light or fan means wiring. Each move carries a real cost and a permit line item.
- Material grade. Stock porcelain versus large-format slab and frameless glass is a multi-thousand-dollar spread on its own.
- Permit scope. A shower that touches plumbing or structural framing needs an inspection; a cosmetic-only swap doesn’t. We lay out exactly which applies to your job.
A written estimate lists demo, rough-in, waterproofing, tile, fixtures, glass, permits, and cleanup as separate line items. What it won’t cover: hidden rot or code issues we find behind the wall, which we price and show you in writing before doing the work. Upfront pricing, no surprises – the number you see is the number you pay, and no change order happens without your sign-off. Every project is backed by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Pinewood Homes Specifically Do to This Job
Pinewood sits in Miami-Dade’s high-velocity hurricane zone, so this isn’t a cosmetic-only market. Windborne-debris product approvals and Florida Building Code requirements apply here in a way inland Florida rarely sees, and they touch a shower project through the exterior wall, the window you may replace while you’re at it, and any structural change. In the low-lying blocks near the Little River, the shallow water table matters on any job that cuts into the slab for a curbless pan. We plan the sequencing around it before we pour.
The housing stock does the rest. In 33167, most of what we open up is mid-century block-and-stucco – 1950s – 60s ranch and Miami-modern homes where the bathroom was tiled once and never touched again. Cutting into solid CMU walls and retrofitting a waterproofing system into a bathroom that never had a proper one is the standard job, not the exception. It’s also why the summer schedule runs around afternoon downpours and storm watches, and why we build mold-resistant assemblies inside every air-conditioned enclosure. If a full renovation is in the picture, this pairs naturally with Bathroom Remodeling in Pinewood, and homeowners in older homes often pair it with Roof Replacement & Installation in Pinewood once the wind-uplift question comes up. Our Bathroom Remodeling team runs the wider scope, and we cover the whole of Pinewood including the blocks near the Little River.
Serving Pinewood, FL – Our Local Coverage Area
We serve Pinewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Pinewood
Most projects take two to four weeks of active work, plus a few extra days of glass lead time. Permit review and the inspection stage add the most variance, and a job that opens a wall in an older block home can run longer if we find framing damage. Call (833) 968-1198 for a schedule specific to your bathroom.
Yes, if the project touches plumbing, electrical, or structural framing, which most do. A cosmetic-only swap may not require one. We pull the permit through Miami-Dade County and handle the inspection – you don’t file anything. Call us for a permit scope read on your job.
Often, yes – if the drain and supply stay where they are, a walk-in conversion is a straightforward tile-and-pan job with no slab work. The moment you want a curbless pan or a relocated drain, the slab gets cut and the cost and timeline both grow. We’ll tell you which scenario your bathroom falls into.
The full project runs $9,000 – $28,000, with a walk-in install at $4,500 – $12,000 and a shower replacement at $3,000 – $8,500. Size, existing condition, plumbing moves, and material grade are what move the number. Call (833) 968-1198 for an exact written quote – the estimate is free.
Every shower we build is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right, for two full years on workmanship. That backs the waterproofing, the tile, and the installation, not just the fixtures. Call for the written details.
Get a Free Estimate on Your Pinewood Shower
We’ll come out, measure the bathroom, and give you a written line-item estimate at no cost, with financing available at 0% for 18 months and $1,000 off projects over $10,000. On the call, we’ll confirm a time that works and answer your questions before we ever set foot on site. Call (833) 968-1198 – a live person picks up, day or night.
Written by the team at Groundwork Construction Co. of Miami.