Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Westview, FL: What It Costs and How Long It Takes
Aluminum fence installation in Westview, FL typically runs $4,000 – $10,000 for a standard residential lot, and most jobs are finished in one to three days once materials are on site. You’re pricing a rust-proof, low-maintenance barrier that holds its finish through South Florida sun and salt air, which is why it costs more than chain link and less than ornamental iron. Call (833) 968-1198 for a free on-site estimate.
How a Westview Aluminum Fence Job Actually Runs
Aluminum fence looks simple from the street. The work that makes it last happens before a single panel goes up. Here’s the real sequence we follow on Westview properties.
Stage 1: Site walk and layout (day 1, about an hour)
We walk the property line with you and mark post locations with stakes and string. This is where you decide the run, gate placement, and height. On tighter Westview lots, the difference between a 4-foot and 5-foot fence often comes down to how close the run sits to a neighbor’s property line, so we measure that first rather than guessing.
Stage 2: Utility locate and permit filing (day 1 – 5)
Florida law requires a free utility locate before anyone digs, and we schedule it before excavation. Because Westview is unincorporated, the fence permit goes through Miami-Dade County rather than a city building department, which changes the paperwork and the inspection schedule. If your fence is under the county’s height threshold and not in a flood easement, many residential runs qualify for a simplified review; we confirm that in writing before we order material.
Stage 3: Excavation and post setting (day 1 – 2 of install)
Posts get set in concrete footings sized to the fence height and wind load. This is the stage that takes the longest and the one nobody sees later. Aluminum is light, so the posts carry the load, not the panels. We let footings cure before hanging anything.
Stage 4: Panel and gate hang (day 2 – 3)
Rails and pickets go up, then gates. You’ll confirm gate swing direction and latch hardware at this point. Self-closing hinges and a magnetic latch are a small upgrade that matters if there’s a pool or a dog in the picture.
Stage 5: Walkthrough and cleanup (same day as stage 4)
We walk the finished run with you, check gate alignment, and haul off all packaging and spoils. Most jobs are completed in a single visit once the material is delivered and footings are cured, so plan on one day of real disruption, not a week.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Aluminum fence isn’t one product. These are the decisions that change both the look and the number:
- Residential vs. heavy-duty gauge. Standard residential aluminum pickets are lighter and cost less; heavier gauge resists bending from impacts and holds up better on long runs with few posts. For most Westview lots the standard gauge is fine, but if the fence backs onto a busy road or a school route, step up.
- Powder-coated vs. mill finish. Powder coating is the norm and comes in black, bronze, and white. It’s what survives the UV here. Mill finish looks raw and oxidizes; skip it.
- Picket style and spacing. Flat-top, spear-top, and 2-rail or 3-rail configurations. Tighter spacing adds material cost and gives more privacy; wider spacing costs less and reads more open. Dog owners usually want the tighter spacing.
- Height. 4-foot, 5-foot, and 6-foot runs. Height drives post size, footing depth, and whether the county reviews the permit differently. Pool barriers have their own requirements, so tell us if the fence encloses a pool.
- Gates and hardware. Walk gates, double-drive gates, and self-closing hardware. A wide double gate is the single biggest line-item jump on most estimates.
Finish and hardware are where cheap aluminum shows its age first. We source through established manufacturers so the coating and the warranty behind it are real, and the same standard carries into our Fence Installation work across every material.
What Aluminum Fence Costs in Westview, FL
Plan on $4,000 – $10,000 for a typical residential aluminum fence in Westview, FL. That’s the honest working range, and here’s what pushes a job toward one end or the other:
- Linear footage. The biggest driver. A small front-yard run sits near the bottom of the range; a full perimeter around a quarter-acre lot lands near the top.
- Height and gauge. A 6-foot heavy-gauge run costs meaningfully more per foot than a 4-foot standard run, in both material and footing work.
- Gate count and size. Each gate adds hardware, framing, and labor. Double-drive gates add the most.
- Site conditions. Roots, old concrete, buried debris, or an existing fence to remove all add labor. On older Westview lots, demo of a rusted chain link run is a common add.
- Permit scope. County review, utility locate coordination, and any flood-zone or easement conditions factor into the total.
A written estimate from us lists posts, panels, gates, hardware, footings, demo, permit fees, and cleanup as separate line items. What it won’t cover: landscaping repair where trenches cross a garden bed, or moving irrigation lines that weren’t marked. We flag those before you sign, not after. Upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Westview Homes Specifically Do to This Job
Westview is a small, historically Black unincorporated community in northwest Miami-Dade (ZIP 33167), and that status shapes the work. There’s no city building department here, so fence permits route through Miami-Dade County. Property lines on the older plats are sometimes tighter than homeowners expect, and on infill lots near the neighborhood churches and institutions, the run has to respect setbacks that a newer subdivision would have baked in already.
The housing stock matters too. Much of Westview is 1950s – 1970s concrete-block single-family homes, often with an existing chain link or wood fence that’s been in the ground for decades. Pulling old posts out of that ground is its own task, and we price it as one. Intense UV and salt-laden humidity are what kill fence finishes here, which is exactly why powder-coated aluminum is the right call over wood or vinyl: it doesn’t rot, it doesn’t fade to chalk in two summers, and it doesn’t need repainting. If the fence is part of a larger yard rebuild, homeowners often pair this with Patios, Walkways & Pool Decks in Westview so the whole exterior gets done in one schedule, and sometimes with Driveway Repair & Replacement in Westview when the fence line runs along a cracked apron. We cover the full Westview area, and when the fence is one piece of a bigger Fence Installation in Westview plan, we scope it together.
Serving Westview, FL – Our Local Coverage Area
We serve Westview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Aluminum Fence in Westview
One to three days on site for most residential runs, with permit review adding a few days before we start. Material lead time is the variable that surprises people; standard colors and heights are quicker than custom powder-coat orders. Call (833) 968-1198 and we’ll give you a realistic date range for your run.
Yes, most runs require a permit through Miami-Dade County, since Westview is unincorporated. Height, location relative to easements and property lines, and pool-barrier rules all affect what gets reviewed. We pull the permit and handle the inspection, so you’re not the one chasing paperwork.
Mostly, yes. Posts require footings, so there will be dig spots along the line, but a fence doesn’t disturb plumbing, structure, or your home’s interior the way other projects do. We protect turf where we can and clean up spoils at the end. Call (833) 968-1198 with your lot layout and we’ll tell you what to expect.
Most residential jobs land between $4,000 and $10,000, driven by linear footage, height, gauge, and gate count. A short front-yard run sits near the low end; a full perimeter with a double gate sits near the high end. Call (833) 968-1198 for an exact quote, and estimates are free.
Every aluminum fence we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers our workmanship on top of the manufacturer’s finish warranty. It’s one of the longest workmanship guarantees in the residential construction space, and it’s in writing.
Get a Free Aluminum Fence Estimate in Westview
Call (833) 968-1198 to schedule a free on-site estimate for your aluminum fence in Westview. We’ll walk the property line with you, mark the run, talk through height, gauge, and gate placement, and leave you with a written line-item quote, no surprises. Calls are answered by a live person 24/7. If your project qualifies, $1,000 off projects over $10,000 and 0% financing for 18 months are available.
Written by the team at Groundwork Construction Co.