Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Pinewood, FL: What It Costs and How Long It Takes
An aluminum fence in Pinewood, FL typically runs $3,500 to $9,000 installed, and most residential runs are finished in two to four working days once the permit clears. Aluminum suits Pinewood well because it shrugs off salt air, intense sun, and hurricane-season wind in a way that wood and vinyl can’t match over the long run. Call (833) 968-1198 and we’ll walk you through the real number for your lot before anyone touches a shovel.
How an Aluminum Fence Gets Built Here, Start to Finish
An aluminum fence looks simple from the street. The work behind it is all about the ground, the code, and the layout. Here’s the actual sequence we run in Pinewood.
Stage 1: On-site measure and layout (day 0)
We walk the property line with you, mark the post positions, and talk through gate placement, height, and whether you want to preserve an existing setback. This is the visit where you decide the fence height and the gate swing direction. It takes about 90 minutes and it’s where most change orders get avoided.
Stage 2: Utility locate and permit (days 1-5)
We call in the free utility locate and assemble the permit application with the product approval paperwork. In Miami-Dade’s high-velocity hurricane zone, an aluminum fence isn’t just a decorative site element; the panels and posts need a product approval that satisfies the Florida Building Code’s windborne-debris requirements. This is the stage that surprises out-of-town contractors, and it’s the stage we plan around so you’re not stuck waiting.
Stage 3: Demo and prep (day 1 of install)
If there’s an old wood or chain link run in the way, we pull it and haul it off, then string-line the new layout. Post holes get dug to the depth the soil and wind rating call for, which on the low blocks near the Little River means we’re watching the water table as we dig. You decide here whether you want any concrete curb or mow strip along the bottom.
Stage 4: Set posts and pour footings (days 1-2)
Posts go in with concrete footings, set plumb and to the correct spacing for the panel width you picked. Footings cure overnight, which is why we don’t hang panels the same day. This is also when we set gate posts to a heavier spec, because a gate carries more load than a straight run and it’s the first thing that sags on a cheap install.
Stage 5: Hang panels, set gates, final walk (days 3-4)
Panels go up, the gate gets hung and adjusted for a clean latch and level swing, and we do a final walk with you before we clean up. Any punch-list item gets handled on the spot. The full job is covered by our 730-Day Done Right Promise, so if a post settles or a gate misaligns, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make on an Aluminum Fence
Aluminum fencing isn’t one product. The options below are the ones that change both the look and the price, and each has an honest trade-off.
- Residential-grade vs. heavy-duty aluminum: Standard residential panels handle a typical lot fine. Heavy-duty posts and rails cost more but resist a leaning teen and a hurricane gust better. On a corner lot or a windy exposed run, the upgrade pays for itself.
- Powder-coat finish vs. bare mill finish: Powder coating is the default for a reason: it holds color against this sun and resists chalking. Bare aluminum lasts, but it looks industrial. Most Pinewood homeowners pick a powder-coat black or bronze.
- Panel style: Flat-top, arched, and picket-style panels all install the same way; the style is purely visual and doesn’t change the structural price much. Decide this early because lead times differ by style.
- Height (4 ft, 5 ft, or 6 ft): Height is the biggest single price lever and also the biggest code lever. A taller fence costs more per foot and may trigger a different permit review. We’ll tell you what your lot allows.
- Gate type: A self-closing pedestrian gate, a double-drive gate, or an automated gate. Each adds hardware and, on an automatic gate, an electrical run. Decide whether you want automation now, because retrofitting power to a gate later costs more than planning it in.
One honest note: aluminum doesn’t give you the privacy of a solid wood or vinyl panel. If privacy is the driver, we’ll tell you straight and point you somewhere else. If durability, low maintenance, and a clean sightline are the goals, aluminum wins in this climate.
What Aluminum Fence Costs in Pinewood, FL
Expect $3,500 to $9,000 for a typical residential aluminum fence in Pinewood, FL, with most jobs landing in the $4,000 to $10,000 band once gates and heavier posts are factored in. Here’s what moves the number up or down.
- Linear footage: The obvious one. A small front-yard enclosure is at the low end; a full perimeter is at the high end.
- Height and grade: A 6-foot heavy-duty run costs meaningfully more per foot than a 4-foot residential panel.
- Gates: Each gate adds hardware and a heavier post. A drive gate or an automated gate pushes the job toward the top of the range.
- Site conditions: Rocky ground, roots, or a low water table near the Little River can add digging time and footing material. We flag this at the estimate, not mid-job.
- Permit and product approval: In this hurricane zone, the approval paperwork and inspection add real cost, and it’s built into the written quote.
Our written estimates are line-item: footage, height, gates, footings, permit, and haul-away are each listed. What’s typically not included is landscaping restoration after digging and any electrical work for an automated gate, which we’ll price separately if you want it. Upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Pinewood Homes Specifically Do to This Job
Pinewood sits in Miami-Dade’s high-velocity hurricane zone, and that fact reshapes every aluminum fence project here. The 33167 ZIP includes low-lying blocks near the Little River, where a shallow water table shows up during footing work; on those lots we plan post depth and concrete volume differently and we coordinate with Miami-Dade’s floodplain elevation requirements before we dig. Because the housing stock in 33167 runs from 1950s-60s concrete-block ranch and Miami-modern homes to 1970s-80s low-rise apartments and newer infill townhomes, the fence line often has to work around existing block walls, mature trees, and old property-line quirks rather than a clean empty lot. The subtropical sun, humidity, and June-November hurricane season also mean we schedule installs around summer afternoon downpours and storm watches, not straight through them. And on the blocks east of Northwest 22nd Avenue, we routinely see the legacy wood or chain link fence the new aluminum run is replacing fail at the posts, not the panels: rusted footings and leaning posts that a proper aluminum install eliminates. We cover all of Pinewood and the surrounding area, and our fence installation service is part of a full Fence Installation in Pinewood scope when your project grows past one run. If you’re already planning Driveway Repair & Replacement in Pinewood or Patios, Walkways & Pool Decks in Pinewood, homeowners often pair that with a new fence so the whole yard is finished at once. If you want the wider view of what we build, our Fence Installation service page lays it out.
Serving Pinewood, FL – Our Local Coverage Area
We serve Pinewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Aluminum Fence in Pinewood
Most residential aluminum fence jobs in Pinewood take two to four working days of install once the permit and product approval clear, with one to two weeks of lead time before that. Call (833) 968-1198 for a schedule based on your lot.
Yes, in nearly all cases. Because Pinewood is in Miami-Dade’s high-velocity hurricane zone, the fence must meet windborne-debris and product-approval requirements under the Florida Building Code, and that means a permit and an inspection. We handle the paperwork; call (833) 968-1198 to start.
Most jobs run $3,500 to $9,000, with height, gate count, footage, and site conditions driving the final number. Call (833) 968-1198 for an exact quote; estimates are free.
No. We give you a line-item written estimate up front and the number you see is the number you pay, with no change orders added mid-job. If site conditions like a shallow water table change the footings, we tell you before we start, not after. Call (833) 968-1198 with your questions.
Every aluminum fence we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space. Call (833) 968-1198 and we’ll put the details in writing.
Get a Free Aluminum Fence Estimate in Pinewood
Call (833) 968-1198 to schedule a free on-site estimate for your aluminum fence in Pinewood, FL. A live person answers around the clock, so you’re not leaving a voicemail. On the walk-through we’ll measure your line, talk through height and gates, flag any permit or footing issues, and give you a written line-item quote with the 730-Day Done Right Promise behind it.
Written by the team at Groundwork Construction Co.