Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Olympia Heights: What It Costs and How Long It Takes
Walk-In Showers & Shower Remodeling in Olympia Heights typically runs $4,500-$12,000 for a walk-in shower install and $9,000-$28,000 for a full shower-and-bath scope, with most jobs finished in 5 to 12 working days once permits clear. A straight replacement of an existing shower pan and tile usually lands at the low end; moving the drain, adding a bench, or converting a tub alcove pushes you toward the top. Call (833) 968-1198 for a free on-site estimate and a written line-item price before anything gets demoed.
How the Job Actually Runs, Stage by Stage
Shower work is sequenced tight because every stage hides the one before it. Here’s the real order, with the decisions that land on you and when.
Stage 1: Measure, moisture test, and scope (day 1, about 90 minutes)
We open the wall behind the valve, check the substrate for old water damage, and confirm what’s actually under the tile. In 1950s-70s Olympia Heights homes this step regularly turns up a rotted greenboard backer or a pan that was set on drywall mud instead of a proper slope. You decide the footprint here: curbless, low curb, or standard curb, and whether the drain stays where it is.
Stage 2: Demo and rough-in (days 1-2)
Tile, pan, and old valve come out. If you’re keeping the valve location, this is fast. If you’re moving the shower head to the opposite wall or adding a hand-held on a separate drop, the plumber reroutes supply and drain lines and that adds a day. The permit inspection for rough plumbing happens at the end of this stage, before anything gets closed up.
Stage 3: Waterproofing and pan (days 3-4)
This is the stage that decides whether the shower lasts 8 years or 25. We build a sloped mortar bed or a bonded waterproofing membrane system, then flood-test the pan for 24 hours. You don’t have to decide anything here, but you should ask to see the flood test. Any installer who skips it is gambling with your subfloor.
Stage 4: Tile, stone, or panel (days 5-8)
Large-format porcelain, small mosaic on the floor for grip, a marble-look slab, or an acrylic surround. You make the material pick at the estimate, not mid-job, because lead times on slab and specialty tile run 3-10 days in this market. Grout goes in and cures before glass gets templated.
Stage 5: Glass, trim, and final inspection (days 9-12)
Frameless glass is templated after tile, then fabricated, so expect a 5-7 day gap between tile completion and glass install. Final plumbing and electrical inspection signs off, we caulk, and you walk the job with us. Anything on the punch list gets fixed before we call it done, and the work sits under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
Most of the cost swing on a walk-in shower lives in four decisions. Here’s the honest version of each.
- Pan system: mortar bed vs. pre-formed. A sloped mortar bed with a bonded membrane is the gold standard and handles odd footprints; it costs more in labor. A pre-formed acrylic or composite pan is faster and cheaper but limited to standard sizes and shows scratches over time.
- Wall surface: tile vs. slab vs. panel. Porcelain tile is the value play and holds up well to humidity. Marble-look slab gives a seamless look with fewer grout lines to scrub but runs 2-3x the tile cost. Acrylic surrounds are the budget option and the first thing to look dated in 10 years.
- Glass: frameless vs. framed vs. curtain. Frameless 3/8-inch glass is the look most Olympia Heights homeowners ask for and the biggest single line item after tile. Framed glass saves money and hides minor wall out-of-square. A curtain is cheapest and the least durable in a humid bathroom.
- Drain and curb: curbless vs. curb. Curbless requires recessing the floor framing or building up the surrounding floor, which adds framing labor but gives an accessible, modern look. A low curb is simpler and cheaper and still easy to step over.
Fixtures matter too. A thermostatic valve and a properly sized exhaust fan aren’t glamorous, but they’re what keeps a shower from growing mold behind the tile. We spec Kohler fixtures on most jobs because parts stay available, which matters years down the road.
What Walk-In Showers & Shower Remodeling Costs in Olympia Heights, FL
Plan on $4,500-$12,000 for a walk-in shower installation and $9,000-$28,000 when the shower is part of a broader bath scope. Here’s how the line items break down:
| Scope | Typical range |
|---|---|
| Shower replacement (same footprint, new pan and tile) | $3,000-$8,500 |
| Walk-in shower installation (curbless or low curb) | $4,500-$12,000 |
| Tub-to-shower conversion | $3,500-$10,000 |
| Full bath scope with shower rebuild | $9,000-$28,000 |
Five things push a job from the low end to the high end: footprint size (a 36×48 shower is half the tile of a 60×60), existing condition (rotted framing or a failed pan adds demo and rebuild labor), plumbing relocation (moving the drain or valve adds a day and a re-inspection), material grade (slab and frameless glass add real money), and permit scope (a shower-only permit is cheaper and faster than a full bath remodel permit).
A written estimate from us lists demolition, rough plumbing, waterproofing, tile, glass, fixtures, and permit fees as separate lines. What it doesn’t include unless we note it: structural repairs found behind the wall, and any HOA architectural review fees. Upfront pricing means the number you see is the number you pay. Call (833) 968-1198 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Olympia Heights Homes Do to This Job
Olympia Heights (ZIP 33165) is unincorporated Miami-Dade, and almost every shower we touch sits inside a 1950s-70s concrete-block ranch. That build era matters. The original bathrooms were often small, with a tub alcove framed in furring strips over block, and decades of humidity behind the tile means the backer board is frequently soft by the time we open it. We plan for that on the estimate rather than surprising you mid-demo.
Permitting runs through Miami-Dade County, not a city building department, and the county’s product approval process means even a shower valve change gets reviewed for a Notice of Acceptance when it touches the plumbing system. We assemble the permit package so the inspection doesn’t stall. The other local reality is waterproofing: subtropical downpours and year-round humidity mean a shower without a continuous membrane and a properly vented fan will grow mold within a season or two. If the shower shares a wall with a flat or low-slope roof section, we check that flashing too. Homeowners often pair this work with Roof Replacement & Installation in Olympia Heights when the same water intrusion shows up at both ends. If you’re rethinking the whole room while the wall is open, our Bathroom Remodeling in Olympia Heights page covers the wider scope, and you can see everything we handle across Olympia Heights.
Serving Olympia Heights, FL – Our Local Coverage Area
We serve Olympia Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Walk-In Showers & Shower Remodeling in Olympia Heights
Most Walk-In Showers & Shower Remodeling jobs in Olympia Heights take 5 to 12 working days, with the glass fabrication gap being the most common delay. A same-footprint replacement runs closer to 5-6 days; a curbless job with relocated plumbing runs 10-12. Call (833) 968-1198 for a schedule specific to your bathroom.
Yes, any job that touches plumbing, electrical, or the shower pan needs a Miami-Dade County permit and inspection. Tile-only cosmetic changes may not, but most shower remodels do. We pull the permit and handle the inspection as part of the job. Call for a free estimate that includes the permit fee as a line item.
Yes, and that’s the most common path we take. Keeping the drain and valve in place saves roughly $1,000-$3,000 and a day of labor. If you want the shower head moved or a bench added, that changes the rough-in scope, so we price it up front. Call (833) 968-1198 to talk through what’s possible in your layout.
A walk-in shower installation in Olympia Heights runs $4,500-$12,000, and a full bath scope with shower rebuild runs $9,000-$28,000. Material grade, glass choice, and plumbing relocation are the biggest swing factors. Call (833) 968-1198 for an exact quote, and the estimate is free.
Every shower we build is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That covers workmanship on waterproofing, tile, and glass install for two years. Product warranties from manufacturers apply separately. Call for the written warranty terms before you sign anything.
Get a Free Walk-In Shower Estimate in Olympia Heights
Call (833) 968-1198 and a live person answers any hour, any day. We’ll schedule a free on-site estimate, measure your bathroom, talk through curbless versus curb, tile versus slab, and hand you a written line-item price with the permit fee included. No pressure, no surprise change orders. If the job is over $10,000, the $1,000 off promotion applies, and 0% financing for 18 months is available. From foundation to finish line, we handle the whole shower.
Written by the team at Groundwork Construction Co.