Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Olympia Heights: What the Job Actually Involves
Backsplash, tile & flooring work in Olympia Heights typically runs $800 – $2,500 for a backsplash alone and $14,000 – $45,000 when tile and flooring are folded into a larger kitchen project, with most single-trade jobs finishing in three to six working days. The scope covers removing old surfaces, flattening and waterproofing the substrate, setting tile, grouting, sealing, and reinstalling outlets and trim. Call (833) 968-1198 and we’ll put a written line-item estimate in front of you before anyone lifts a pry bar.
Key Takeaways
- Backsplash-only projects in Olympia Heights: $800 – $2,500. Tile and flooring folded into a kitchen: $14,000 – $45,000.
- Most backsplash jobs finish in 2 – 3 days; flooring runs 3 – 5 days depending on square footage and substrate condition.
- Concrete-block walls in 1950s – 70s Olympia Heights homes often need skim-coating before tile goes up, and that’s a cost line most bids skip.
- Wet-area tile (shower surrounds, floor tile near plumbing) usually needs a permit. Cosmetic backsplash over sound drywall typically doesn’t.
- Every job is covered by the 730-Day Done Right Promise, in writing.
How We Run a Backsplash, Tile & Flooring Job in Olympia Heights
Tile work lives or dies on what’s underneath it, and in Olympia Heights that means the first day is almost entirely prep. Here’s the real sequence we follow, with the decisions you’ll be making at each stage.
Stage 1: Demo and substrate assessment (Day 1)
We pull the old backsplash, floor tile, or both, and get eyes on what’s behind it. In Olympia Heights concrete-block homes from the 1950s through the 1970s, that’s often original mud-set tile or thinset bonded directly to block, and it comes off in chunks. Floor demo runs 4 – 8 hours for a typical galley kitchen; backsplash demo is 2 – 3 hours. You decide here whether to keep the existing drywall or replace it; we’ll tell you which one the substrate actually supports.
Stage 2: Flattening, waterproofing, and layout (Day 2)
Block walls are rarely flat, and thinset can’t fix a 3/8-inch bow. We skim-coat with a modified mortar, then apply a waterproofing membrane in wet zones. This is where you approve the layout: tile orientation, grout line width, and where the pattern terminates at cabinets, outlets, and windows. Getting this right on paper saves a tear-out later.
Stage 3: Tile setting (Days 2 – 4)
Backsplash and floor go down in sequence, back-buttered and set with a notched trowel sized to the tile. A 30-square-foot backsplash takes roughly 4 – 6 hours to set. Floor tile at 120 square feet runs 1.5 days. You’ll confirm grout color at this stage; we recommend dry-testing a sample joint because wet grout reads two shades darker than dry.
Stage 4: Grout, seal, and trim (Day 4 – 5)
Grout cures 24 hours before sealing. We use an epoxy or a sealed cementitious grout depending on traffic and moisture. Edges get finished with Schluter profiles or a matching bullnose, and outlets and switch plates go back in. This is also when we caulk the joint between tile and countertop, which needs a flexible sealant, not grout, or it cracks within a season.
Stage 5: Final walkthrough and punch (Day 5 – 6)
We walk the job with you under raking light, checking for lippage, hollow spots, and grout voids. Anything you flag gets fixed before final payment. The 730-Day Done Right Promise covers workmanship for two full years, which matters most on floors where a bad bond shows up six months in.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Backsplash, Tile & Flooring Options You’ll Choose Between
These are the real decisions that shape both budget and how the kitchen feels five years from now. No single right answer; it depends on how you cook and how long you plan to stay.
- Ceramic vs. porcelain tile: Ceramic is $2 – $8 per square foot installed, softer, easier to cut, and fine for backsplashes. Porcelain runs $4 – $14 installed, denser, and the only sensible choice for floors in a humid climate. The trade-off is cost and a slightly harder installation.
- Large-format vs. subway: Subway tile is forgiving and cheap; large-format panels (24″×48″+) cut grout lines to almost nothing but demand a perfectly flat substrate, which adds prep cost on block walls.
- Grout choice: Cementitious grout is cheap and needs resealing every 1 – 2 years. Epoxy grout costs more up front and resists staining and mold far better in a subtropical climate.
- Flooring underlayment: Schluter’s uncoupling membrane adds roughly $3 – $6 per square foot but isolates tile from slab movement, a real concern on limestone-ridge slabs that shift.
- Trim and edge profiles: Schluter profiles give a clean metal or PVC edge; bullnose tile matches the field but adds material cost. Both are fine; the profile looks more finished.
What Backsplash, Tile & Flooring Costs in Olympia Heights, FL
Here’s the honest range, line item by line item. These are Olympia Heights market numbers, not national averages.
| Line Item | Price Range |
|---|---|
| Backsplash installation (30 – 40 sq ft) | $800 – $2,500 |
| Countertop installation (if bundled) | $2,000 – $6,500 |
| Cabinet installation (if bundled) | $4,000 – $13,000 |
| Full kitchen remodel including tile & flooring | $14,000 – $45,000 |
Four things push a job from the low end to the high end: square footage, substrate condition (skim-coating a bowed block wall adds labor), material grade, and whether anything gets relocated. Moving a sink or an outlet behind the backsplash adds an electrician or plumber to the job and typically $300 – $900. Existing mud-set tile that won’t come off cleanly adds demo hours.
A written estimate from us lists tile quantity, setting materials, trim, labor by stage, and any substrate prep. What it won’t include unless you ask: tile you buy yourself (we can spec it and you source it), and any structural change discovered mid-demo, which we’ll quote in writing before proceeding. Upfront pricing, no surprises. Call (833) 968-1198 for an exact number.
See the difference
Before
After
Before
After
Before
AfterWhat Olympia Heights Homes Specifically Do to This Job
Olympia Heights (ZIP 33165) is a mid-century pocket of unincorporated Miami-Dade dominated by permitted additions and enclosures to 1950s – 70s concrete-block ranch homes, so tile and flooring work here is rarely a clean-slate job. The walls are block, the floors are often original terrazzo, and the kitchen was reconfigured at least once by a previous owner. We regularly find tile set directly over a carport slab that was never meant to carry interior flooring, and that gets caught before we set a single square foot.
The climate shapes the materials too. Olympia Heights sits on Miami-Dade’s limestone ridge with intense summer sun and heavy seasonal downpours, so we spec UV-stable finishes, continuous waterproofing in wet zones, and grout that resists the humidity. And the county’s post-Andrew product approval process applies to anything structural or permit-triggering, which is why even a wall-tile job in a shower surround goes through the NOA paperwork if the substrate changes. That’s not something we shortcut.
Serving Olympia Heights, FL – Our Local Coverage Area
We serve Olympia Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Backsplash, Tile & Flooring in Olympia Heights
A backsplash alone takes 2 – 3 days; flooring runs 3 – 5 days; both together in one kitchen takes 5 – 7 working days with cure time factored in. Call (833) 968-1198 to schedule your free estimate.
A cosmetic backsplash over sound drywall typically doesn’t require a permit; wet-area tile like a shower surround or any substrate change usually does under Miami-Dade rules. We pull the permits and pass the inspections, and we’ll tell you upfront which category your job falls into.
Yes, in most cases, and that’s the cheaper path. If you want to relocate a sink or open a wall behind the backsplash, that adds trades and cost, and we’ll quote it separately. For a bathroom tile job where fixtures are moving anyway, homeowners often pair this with a Tub-to-Shower Conversion in Olympia Heights and a Vanities, Tile & Fixtures in Olympia Heights upgrade for a consistent finish across the house.
Backsplash alone runs $800 – $2,500; a full kitchen with tile and flooring lands at $14,000 – $45,000 depending on size and substrate. Call (833) 968-1198 for a written estimate, free of charge.
Every job is backed by the 730-Day Done Right Promise, which covers workmanship for two full years. If a tile lifts or a grout line fails, we make it right. That’s the written guarantee we stand behind.
Ready to Price Your Backsplash, Tile & Flooring in Olympia Heights?
We’ll come to your Olympia Heights home, walk the kitchen, and hand you a written line-item estimate covering tile, prep, and labor. No pressure, no surprises. Call (833) 968-1198 and a live person answers around the clock to book your free estimate. If the job turns into a full Kitchen Remodeling in Olympia Heights, we’ll fold it into one plan through our Kitchen Remodeling service. We cover all of Olympia Heights and the surrounding communities.
Written by the team at Groundwork Construction Co.