Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Coral Gables, FL: What It Costs and How Long It Takes
A new aluminum fence in Coral Gables, FL typically runs $4,000 – $10,000 for most residential properties, with the lead range across the work we quote sitting at $3,500 – $9,000 depending on linear footage, height, and design-review requirements. The job itself moves fast once approved: most aluminum fence installations are measured, fabricated, and set in two to four working days. Where the timeline stretches is the front end, because Coral Gables requires Board of Architects approval for exterior changes before a single post goes in. Call (833) 968-1198 for a free on-site estimate.
How We Run an Aluminum Fence Job, Stage by Stage
Aluminum fencing looks simple from the sidewalk. It isn’t, especially here. Here’s the honest sequence, with the durations you should expect.
Stage 1: Site walk and boundary check (1 – 2 hours)
We measure the actual run line, confirm property boundaries against your survey, and identify what’s underground along the path: irrigation lines, pool bonding wire, low-voltage lighting. This is where we flag whether your lot sits on coral rock close to the surface, which changes the post-setting approach. You decide fence height (4 ft, 5 ft, or 6 ft are the standard residential options) and whether you’re enclosing a pool area, a front yard, or a full perimeter.
Stage 2: Design review and permitting (2 – 6 weeks in Coral Gables)
This is the stage that catches out-of-town crews. Any exterior alteration visible from the street, including a new fence and its color, can require Board of Architects review under the city’s Mediterranean Revival design code. We prepare the submittal drawings, finish samples, and site plan, then track the review cycle. You decide the finish color and style now, because those get locked into the application. For a broader look at how this fits a full property plan, see Fence Installation in Coral Gables.
Stage 3: Layout and post setting (1 – 2 days)
We mark the line with string and stakes so you can walk it and approve it before anything is dug. Posts get set in concrete footings sized for the fence height and South Florida wind exposure. On coral rock lots, we may need a rock bit and a slower dig, which adds time but not drama. Around pool enclosures, we confirm the fence meets the barrier requirements before we set a single post.
Stage 4: Panel and gate installation (1 – 2 days)
Racks, pickets, and rails go up once the footings have cured. If you’re adding a gate, this is when the hinge and latch hardware gets mounted and aligned. You inspect the run and confirm swing direction and latch height while we’re still on site.
Stage 5: Final walkthrough and touch-up (half a day)
We clean up, touch up any scratched finish, and walk the finished fence with you line by line. Every job we do is covered by the 730-Day Done Right Promise, which applies to the installation and hardware, not just the day it goes in.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Aluminum Fence Options You’ll Choose Between
Aluminum isn’t one product. These are the real choices that change both the look and the price.
- Residential vs. heavy-duty gauge. Standard residential aluminum runs about $4,000 – $7,500 for a typical yard. Heavy-duty commercial-grade panels cost more but resist bending and stay straighter through hurricane-season wind.
- Height. 4 ft is the most common front-yard choice and the least expensive. 5 ft and 6 ft add material and cost; 4 ft is also the typical pool barrier minimum, but confirm with your inspector.
- Finish and color. Powder-coated finishes in black, bronze, and white are standard. Custom colors cost more and, in Coral Gables, may trigger extra design-review back-and-forth.
- Style. Flat-top picket, spear-top, and ornamental panel designs all price differently. Spear-top and ornamental panels cost more than basic picket.
- Gates. A walk gate adds several hundred dollars; a double drive gate adds more. Self-closing, self-latching hardware is required around pools.
- Rackability. If your grade slopes, you’ll want rackable panels that follow the terrain instead of stepped panels that leave gaps.
What Aluminum Fence Costs in Coral Gables, FL
Most aluminum fence installations in Coral Gables land in the $4,000 – $10,000 range, with the broader lead range for this work at $3,500 – $9,000. Five variables push a job toward the low or high end:
- Linear footage. A small front-yard run costs far less than a full perimeter. Footage is the single biggest driver.
- Height and gauge. Going from 4 ft standard gauge to 6 ft heavy-duty can move the number noticeably.
- Site conditions. Coral rock near the surface, sloped grade, or existing fencing to remove all add labor.
- Design and permitting scope. Board of Architects submittals and historic-sensitive color choices can add review time and cost.
- Gates and hardware. Walk gates, drive gates, and self-closing pool hardware each add to the total.
A written estimate from us is line-item: footage, height, gauge, finish, gate count, footing spec, permit fees, and haul-away. What it won’t include unless we call it out is landscaping repair after digging, or any electrical work if we find a live circuit along the fence line. We flag those before we start. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Coral Gables Homes Specifically Do to This Job
Very few cities in the country regulate a fence the way Coral Gables does. The Board of Architects reviews exterior changes under the city’s Mediterranean Revival design code, and the Historic Preservation Board can get involved on properties with historical designation. That means a fence color that would be a same-week install in neighboring Miami can require submittal drawings, finish samples, and weeks of review in Coral Gables. We plan for that cycle up front instead of discovering it mid-job.
The housing stock matters too. Much of Coral Gables is 1920s Mediterranean Revival, Mission-style, and coral rock (oolitic limestone) construction from George Merrick’s original planned community. On those lots, posts don’t always sink the way they do in newer subdivisions; we plan for rock and masonry. And the subtropical climate – hurricane season June through November, intense sun, heavy rain cycles – means posts have to be set for wind exposure under Florida Building Code’s high-velocity hurricane zone (HVHZ) requirements, not just for looks. We see fence failures here from undersized footings and panels that weren’t rated for wind, which is why we size hardware and footings for the coast, not the catalog. See our wider work across Coral Gables.
Serving Coral Gables, FL – Our Local Coverage Area
We serve Coral Gables and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Aluminum Fence in Coral Gables
The physical installation takes two to four working days once materials are on site. The long part is permitting: Board of Architects review can add two to six weeks. Call (833) 968-1198 for a realistic timeline for your property.
Yes, most aluminum fence installations in Coral Gables require a permit and, depending on visibility and property history, Board of Architects review. We prepare and submit the drawings and finish samples for you. Call (833) 968-1198 to talk through your property.
Usually, yes. We locate irrigation lines, pool bonding wire, and low-voltage lighting before digging, and we adjust post placement where needed. Where a line can’t be avoided, we tell you before we excavate rather than after. Estimates are free at (833) 968-1198.
Most residential aluminum fences here run $4,000 – $10,000, with smaller runs starting around $3,500. Footage, height, gauge, gates, and design-review scope move the number. Call (833) 968-1198 for an exact written quote – estimates are free.
Every aluminum fence we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers installation and hardware, not just the day it goes in. Call (833) 968-1198 with questions about coverage on your property.
Get a Free Aluminum Fence Estimate in Coral Gables
Aluminum fence work in Coral Gables deserves a contractor who knows the Board of Architects process, sets footings for hurricane-season wind, and puts the price in writing. Call (833) 968-1198 for a free on-site estimate. When you call, we’ll ask about your lot, your survey, and any historic designation, then set a time to walk the property. Nothing gets ordered until you approve the written scope.
Written by the team at Groundwork Construction Co.