Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Gladeview, FL: What the Job Actually Involves
Backsplash, tile and flooring work in Gladeview usually runs $14,000 to $45,000 for a full kitchen scope, or as little as $800 to $2,500 when you’re only replacing a backsplash. A typical backsplash-only job takes one to two days; tear-out and re-tile of kitchen floors runs three to five days depending on square footage and what’s under the old surface. Call (833) 968-1198 and we’ll walk your space, measure it, and put real numbers in writing before anyone picks up a tile sponge. Estimates are free and the price you see is the price you pay.
How We Run a Tile and Flooring Job, Start to Finish
Tile work fails on prep, not on the tile. That’s why the first day of a Gladeview backsplash, tile and flooring job is mostly demo and inspection, not installation. Here’s the sequence we follow, and where you make the calls.
- Stage 1 – Walkthrough and layout (day 1, half day). We measure every plane, check for out-of-square walls, and confirm where outlets, switches and the range hood land. You decide the tile layout here: running bond, herringbone, stacked, or a full-height slab. Getting this right on paper saves a very expensive conversation later.
- Stage 2 – Demo and substrate check (day 1, half day). Old backsplash comes off, old flooring comes up, and we inspect what’s underneath. In 33147 we routinely find drywall behind tile where cement board should be, or a second layer of vinyl glued to a third layer of vinyl. Those surprises get handled now, in writing, before install starts.
- Stage 3 – Prep and waterproofing (day 2). Cement board or a Schluter membrane goes up on wet-prone areas, subfloor gets leveled, and any electrical boxes or plumbing rough-ins get adjusted. This is the invisible half of the job, and it’s the half that decides whether the tile is still tight in ten years.
- Stage 4 – Setting tile and grout (days 2 to 4). Tile goes down or up, gets cut around outlets and fixtures, and cures before grout. Grout and caulk follow a day later at the changes of plane. You’ll see progress every day, and we don’t leave the room sealed off for a week.
- Stage 5 – Final walkthrough (day 4 or 5). We check every grout line, re-caulk seams, clean up, and hand you the care instructions. If anything is off, we fix it. That’s what the 730-Day Done Right Promise covers, and it’s in writing.
Most of these jobs are done in a single visit per stage. When the tile work is part of a broader Kitchen Remodeling in Gladeview, we sequence it against cabinet and countertop install so you’re not living with a half-finished kitchen for weeks.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Tile and Material Choices You’ll Actually Make
Nobody walks into this blind, but the catalog is wide. Here’s the honest trade-off between the options Gladeview homeowners pick most.
- Ceramic vs. porcelain backsplash. Ceramic is lighter, cheaper and comes in a huge range of colors; porcelain is denser, more chip-resistant, and handles the splash zone behind a sink or range better. For a hard-working kitchen, we lean porcelain.
- Full-height slab vs. tile. A slab backsplash (often a Cambria quartz matched to your countertops) gives a seamless look with almost no grout to clean. It costs more, and it needs precise templating. Tile is more forgiving and more budget-friendly.
- Porcelain or ceramic plank flooring. Wood-look plank tile is the durable choice for a Miami-area kitchen; it handles humidity, spills and heavy foot traffic. Real hardwood and laminate look warmer but need more care in a humid climate.
- Grout choices. Cementitious grout is inexpensive; epoxy and urethane grouts resist staining and cracking far better. In a humid subtropical climate, that durability matters.
- Trim and transitions. Schluter edge profiles, bullnose tile, and matching thresholds finish the job. Skipping these is how tile edges look cheap.
Fixtures you’re pairing with this work – sinks, faucets, a Delta or American Standard fixture, or a new Toto toilet in an adjacent bath – get spec’d during layout so cuts and rough-ins line up. If you’re refreshing fixtures at the same time, Vanities, Tile & Fixtures in Gladeview covers that side of the job.
What Backsplash, Tile & Flooring Costs in Gladeview, FL
Full kitchen tile and backsplash scope in Gladeview falls in the $14,000 to $45,000 range when you’re redoing floors, backsplash, and coordinating with cabinets or countertops. A backsplash alone is typically $800 to $2,500. Here’s a quick line-item view:
| Scope | Typical Range |
|---|---|
| Backsplash installation only | $800 – $2,500 |
| Kitchen floor tile (tear-out + install) | $3,000 – $9,000 |
| Backsplash + kitchen floor package | $4,000 – $11,000 |
| Tile work within a full kitchen remodel | $14,000 – $45,000 (whole project) |
What moves the number to the high end: large-format or slab tile (harder cuts, more waste), out-of-square walls or uneven subfloor that needs leveling, moving an outlet or relocating a sink line, and premium grout. What keeps it low: staying on existing layout, standard-size ceramic, and a sound substrate under the old floor.
Your written estimate itemizes tile, setting materials, prep, demo, and cleanup separately, so you can compare it to another bid line for line. What it doesn’t include: structural repairs if demo reveals rot or water damage, or plumbing relocation beyond the agreed scope. Those only happen after we show you and you approve.
See the difference
Before
After
Before
After
Before
AfterWhat Gladeview Homes Specifically Do to This Job
Gladeview isn’t a city. It’s an unincorporated pocket of Miami-Dade around NW 79th Street and the 33147 ZIP, and that means every permit here goes through Miami-Dade County’s product-approval (NOA) system and High-Velocity Hurricane Zone rules, not a local city hall. There isn’t one. For tile and flooring work that’s usually straightforward, but the moment your job touches structure, exterior walls, or an unpermitted addition, the county wants it brought to code before anything closes or finances.
And that’s the reality in a lot of 33147 homes: mid-century concrete-block and terrazzo houses from the 1940s through the 1960s, many expanded over the decades with unpermitted additions, carports closed in as bedrooms, and rear units added without a paper trail. When a kitchen tile job uncovers a wall that isn’t tied in the way the drawings say, we flag it before we lay a single tile, because the county’s recertification and post-storm inspection process will eventually find it anyway. Working around that legacy without creating a bigger problem is half of what we do here.
Climate shapes the specs too. South Florida humidity and UV push us toward mold-resistant board, cement-based backer, and grout that won’t mildew in a wet zone. The June-to-November hurricane season is why we don’t cut corners on exterior-facing wall assemblies, even on a kitchen backsplash. Throughout it all, one call to (833) 968-1198 is answered by a live person, and our technicians arrive in uniform and background-checked.
Serving Gladeview, FL – Our Local Coverage Area
We serve Gladeview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Backsplash, Tile & Flooring in Gladeview
A backsplash alone is one to two days; a kitchen floor tear-out and re-tile runs three to five days. Timeline depends on square footage, substrate condition, and whether we’re coordinating with cabinet or countertop work. Call (833) 968-1198 and we’ll give you a day-by-day schedule in your estimate.
Most cosmetic tile and backsplash work doesn’t require a county permit, but any change to structure, plumbing relocation, or electrical adds one. Because Gladeview sits in unincorporated Miami-Dade, permits route through the county, not a city building department. Call us and we’ll tell you plainly whether your specific job needs one.
Yes, and that’s the most common approach. Backsplash replacement on an existing countertop and cabinet run usually doesn’t touch plumbing or framing, which is why it stays in the $800 to $2,500 range. Call (833) 968-1198 to confirm your layout before we schedule.
A backsplash alone is $800 to $2,500, and a full kitchen tile and backsplash package runs $14,000 to $45,000. The biggest price drivers are substrate condition, tile size and material, and whether any rough-in changes are needed. Call (833) 968-1198 for a free on-site estimate with a written line-item quote.
Every tile and flooring project is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If something fails, we make it right, and it’s all in writing. Call (833) 968-1198 with any warranty question before you sign anything.
Get a Free Estimate on Backsplash, Tile & Flooring in Gladeview
Call (833) 968-1198 and a live person picks up, day or night. We’ll set a time to walk your kitchen, measure it, and hand you a written estimate that itemizes tile, prep, demo and cleanup, with no change orders hiding in the fine print. If the project grows into a wider remodel, that’s what our Kitchen Remodeling service is for, and our Gladeview service area covers what that looks like. And if you’re updating a bathroom at the same time, consider pairing this work with a Tub-to-Shower Conversion in Gladeview.
Written by the team at Groundwork Construction Co.