Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Windows & Doors in Coral Gables, FL: What the Job Actually Involves
Impact window installation in Coral Gables runs $8,000 – $25,000 for a typical whole-home package, and most single-family jobs take two to four weeks from signed contract to final inspection once the Board of Architects has signed off. The work covers removal of the old glazing, structural anchoring to the home’s frame, and the sealed, code-rated assembly itself. Call (833) 968-1198 and we’ll walk your home, count the openings, and put a real number on paper.
How the Work Moves From First Walk-Through to Final Inspection
Impact work isn’t a one-day swap. It’s a sequenced job with decision points you control, and here’s how it actually runs.
Stage 1: Site survey and opening count (day 1)
We measure every opening, photograph the existing frames, and check how the walls are built. Coral Gables homes are frequently coral rock or masonry, not wood frame, and that changes anchoring hardware and time. You decide here whether you’re doing the whole house or starting with the windward side.
Stage 2: Product selection and design submittal (days 2 – 10)
You pick the product line, glass package, frame color, and whether you want operable units or fixed panes. Then the drawings go in for permit and, in most of this city, Board of Architects review. This is the stage that eats calendar time, not labor.
Stage 3: Fabrication (weeks 2 – 8, depending on line)
Impact units are custom-built to each opening. Standard white frames arrive faster than custom colors or large sliders. We give you the real lead time in writing so there’s no surprise.
Stage 4: Demo and installation (2 – 4 days for most homes)
We protect floors, pull the old units, prep and shim the openings, anchor per the approved drawings, seal, and set trim. Each room is buttoned up weather-tight before we leave for the day. Most jobs are completed in a single visit per elevation.
Stage 5: Inspection and close-out (1 – 2 weeks after install)
The city inspects. We schedule, meet the inspector, and hand you the product warranty documents, the accepted permit, and the manufacturer’s NOA paperwork so your insurance credit is documented. That final packet matters as much as the windows.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Pick Between
Every impact job comes down to five choices. Here’s the honest trade-off on each.
- Frame material – aluminum vs. vinyl vs. cellular PVC. Aluminum is the strongest and the most common in South Florida; it holds large glass panels well and takes a powder coat in any color. Vinyl costs less and insulates better but can’t carry the biggest openings. PVC is the middle path.
- Glass package. Standard laminated impact glass meets HVHZ code. Low-E and argon add a few hundred dollars per opening and cut solar heat gain noticeably on a west-facing wall, which matters in this climate.
- Product line. We work with PGT and CGI among others. Each has a range from builder-grade to premium; the differences show up in frame profile, hardware, and warranty length.
- Opening type. Fixed panes are cheapest per square foot. Casement, awning, and slider units cost more and need careful hardware. Single-hung keeps the historic look; horizontal sliders give the most glass.
- Color and finish. White and bronze are standard. Custom colors, wood-grain interiors, and divided lites add cost and lead time – and in Coral Gables, exterior color can require Board approval.
If the project is part of a full Windows & Doors in Coral Gables scope, we sequence window work alongside doors so the whole envelope is finished in one push instead of two. You can see the broader range on our Windows & Doors service page.
What Impact Windows & Doors Cost in Coral Gables, FL
Plan on $8,000 – $25,000 for a whole-home impact window package in Coral Gables. A single door, or a small job on one elevation, sits at the low end; a full home with large sliders and custom colors sits at the top. Upfront pricing means the number you see is the number you pay, and we hold it in writing.
What pushes a job toward the high end:
- Opening count and size. Each unit carries a base cost plus a per-square-foot charge. Large sliders and picture windows add fast.
- Existing wall condition. Coral rock and masonry walls can demand different anchors and more prep time than wood frame.
- Structural changes. Enlarging an opening, adding a header, or moving a wall changes the permit scope and the labor.
- Product grade and glass. Premium lines, low-E glass, and custom colors each add dollars per opening.
- Permit scope. A whole-house replacement runs a different review than one door, and Board of Architects review adds design and submittal time.
Your written estimate itemizes units, glass, hardware, installation, permit fees, and inspection. It does not cover things we haven’t seen – hidden rot, failed framing, or a wall that needs structural work once it opens up. We flag those in the walk-through so they don’t surprise you.
See the difference
Before
After
Before
After
Before
AfterWhat Coral Gables Homes Specifically Do to This Job
This city is one of the most architecturally regulated in the country. The Board of Architects reviews exterior changes, new construction, and even paint color under the Mediterranean Revival code – so a window project here means design-review submittals and, on some homes, Historic Preservation Board input. That approval cycle is real calendar time and it’s the reason an out-of-town crew quoting “two weeks” will leave you stuck waiting for a sign-off.
The housing stock adds a second wrinkle. Homes across Coral Gables – from the 1920s Mediterranean Revival villas of George Merrick’s original plan to the coral rock and Mission-style residences near the downtown core and around the 33114 ZIP – routinely involve masonry rather than wood frame. Anchoring impact units into oolitic limestone is a different job than nailing them into studs. On older homes we regularly see termite damage hidden behind trim, cracked terracotta surrounds, and single-pane glass that’s been caulked over rather than repaired.
And hurricane season from June through November drives the demand for HVHZ-rated assemblies on nearly every project. We cover the full city – call it a Coral Gables job and we treat it as such, whether you’re a block off the Granada golf course or tucked into a cul-de-sac near the Biltmore.
Homeowners often pair this work with Aluminum Fence in Coral Gables for the perimeter, or an Iron Fence in Coral Gables for a more traditional look along the street.
Serving Coral Gables, FL – Our Local Coverage Area
We serve Coral Gables and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Impact Windows & Doors in Coral Gables
About two to four weeks from contract to final inspection for a typical home, with install itself usually 2 – 4 days. The rest is permit and Board review plus fabrication. Call (833) 968-1198 for a timeline tied to your specific openings.
Yes. Impact windows and doors require a building permit, and exterior changes in this city typically go through Board of Architects review as well. We pull the permits and meet the inspector – you don’t have to chase it. Call (833) 968-1198 to talk scope.
In most like-for-like replacements, yes. If the new unit is the same size as the old, we anchor to existing framing with no structural change. Enlarging or relocating an opening is a different scope and a different permit.
Expect $8,000 – $25,000 for a whole-home package, with a single door or small job at the low end. Product line, glass, color, and opening count drive the number. Call (833) 968-1198 for a written line-item estimate, free of charge.
Manufacturer warranty on the product plus our 730-Day Done Right Promise on the installation – if it’s not done right, we make it right. You also get the NOA documentation your insurer needs for the wind-mitigation credit. Call (833) 968-1198 to start.
Get a Free Impact Windows & Doors Estimate in Coral Gables
We’ll come out, measure every opening, and hand you a written estimate that itemizes product, glass, installation, and permits – no vague ranges, no change orders after the fact. A live person answers the phone 24/7, so call whenever it’s convenient. Financing at 0% for 18 months and $1,000 off projects over $10,000 are available. Call (833) 968-1198 to schedule your free estimate.
Written by the team at Groundwork Construction Co.