Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Coral Gables, FL: What It Costs and How Long It Takes
Metal roofing in Coral Gables typically runs $15,000 to $40,000 for a full roof, and most homes take six to twelve working days on the roof itself once materials are on site. The wildcard here isn’t the install, it’s the front end: a Board of Architects submittal that can add weeks before a single panel goes up. Call (833) 968-1198 for a free on-site estimate and a written, line-item quote.
How the job actually runs, stage by stage
Five stages, and you make a decision at almost every one of them. Here’s the real sequence.
- Stage 1 – Inspection and submittal (week one). We measure the roof planes, check decking condition, note existing penetrations, and photograph everything. If your home sits in Coral Gables’ design-review jurisdiction, the panel profile and color go to the Board of Architects before we order material. That approval cycle is the long pole, and we build the schedule around it rather than pretending it doesn’t exist.
- Stage 2 – Material order and delivery (two to six weeks, depending on profile and finish). Standing seam panels are roll-formed to the measured dimensions. You’ll lock in profile, gauge, and finish color here. Panels ship to the curb, not the backyard, so we plan staging access with you.
- Stage 3 – Tear-off and deck prep (one to two days). Old roofing comes off to the deck. Rotten sheathing gets replaced, and we tell you the count before we do it. We install underlayment and, where the design calls for it, roof-to-wall tie-downs that meet the Florida Building Code’s high-velocity hurricane zone requirements.
- Stage 4 – Panel installation (four to eight days). Panels go up in sections, screwed or clipped to concealed fasteners depending on the system. Flashing, ridge caps, valleys, and penetrations get finished last because that’s where water finds a way in.
- Stage 5 – Punch list and final inspection (one to two days). Walk-through with you, document the finished roof, then the inspection sign-off. We hand you the paperwork your insurer and any future buyer will ask for.
If you’re pairing this with a larger envelope upgrade, it’s often part of a full Roofing in Coral Gables scope where roof, tie-downs, and openings get planned together.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Metal isn’t one product. It’s a family of systems with different costs and different lifespans.
- Standing seam (concealed fasteners): the top end of the range. Better wind performance in HVHZ conditions and a cleaner look that design review tends to accept more readily. Slower to install.
- Exposed-fastener panels (screw-down): lower material cost and faster install, but the fasteners need periodic checking in South Florida sun and rain. Worth it on certain outbuildings, less so on the main house.
- Stone-coated steel: looks like tile, weighs far less, and finishes in the muted tones Coral Gables reviewers expect. A common choice where a homeowner wants the tile look without the structural load.
- Aluminum vs. steel: aluminum resists salt air near the coast better; steel is more dent-resistant and generally less expensive. Finish warranty and gauge both affect price.
- Color and finish: design review limits the palette. Pick close to the Mediterranean Revival tones the city favors and you’re less likely to spend weeks going back and forth.
We’ll show you real samples on the estimate visit so you’re comparing finishes in person, not from a photo.
What Metal Roofing costs in Coral Gables, FL
Plan on $15,000 to $40,000 for a full installation. Five variables push a job toward either end:
- Roof size and pitch: a low-slope or simple gable is cheapest to install. Complex hips, valleys, and steep pitch add labor hours and cut panels.
- Existing roof condition: decking replacement runs per sheet, and it’s the line item most likely to surprise a homeowner whose quote didn’t account for it.
- System and gauge: stone-coated steel and lower-gauge panels sit under standing seam at higher gauges and finishes. That single choice can swing thousands.
- Design review scope: if the submittal requires revisions, the schedule lengthens. Not a material cost, but a real project cost.
- Permit scope: re-roof permits, wind-mitigation documentation, and any structural work to support a heavier system. We pull permits and pass inspections as part of the job.
Your written estimate breaks this out line by line: demo, decking allowance, underlayment, panels, flashing, labor, permit, and inspection. No-hassle upfront pricing means the number you see is the number you pay, and if we open the roof and find something we couldn’t see from the ground, we stop and price it with you before proceeding. The one thing a written quote can’t do is fix a deck that isn’t visible until tear-off. Everything else should be fully priced.
See the difference
Before
After
Before
After
Before
AfterWhat Coral Gables homes specifically do to this job
Coral Gables is one of the most architecturally regulated cities in the country, and that changes this job before any material arrives. Exterior changes, new construction, and even paint colors go through the city’s Board of Architects under the Mediterranean Revival design code. Historic Preservation Board scrutiny applies on top for some properties. Contractors who plan for design-review approval cycles win jobs that out-of-town crews lose to delays and re-submittals, and that’s the whole reason to hire someone who knows the submittal process cold.
The housing stock adds its own wrinkles. Coral Gables is dominated by 1920s Mediterranean Revival villas, Mission-style homes, and coral rock (oolitic limestone) construction from George Merrick’s original planned community. On these roofs, we’re working with masonry, terracotta detailing, and historic-sensitive repairs rather than generic wood-frame construction, so a metal system has to be detailed around existing character rather than slapped over it. Coral Gables’ lone 33114 ZIP sits in the PO-box and downtown district, where even a new front door or fence color can require sign-off. And subtropical South Florida’s hurricane season from June through November drives every decision: roof-to-wall tie-downs, impact-rated systems, and HVHZ requirements are not optional here.
Failures we see on Coral Gables metal roofs most often come from fastener and flashing detail rather than the panel itself. On the older Mediterranean Revival roofs, valley flashing and wall terminations are where water gets in when they’re done hastily. Homeowners here often pair this with Impact Windows & Doors in Coral Gables when they’re bringing the whole envelope up to hurricanes-season standards, or with Window Replacement in Coral Gables on homes where only a few openings need work. For anything beyond the roof plane, our Roofing service handles the wider scope, and we cover the rest of Coral Gables with the same approach.
Serving Coral Gables, FL – Our Local Coverage Area
We serve Coral Gables and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked about Metal Roofing in Coral Gables
Six to twelve working days on the roof itself, once panels are on site. Design review is the bigger variable; the submittal and approval cycle can add several weeks before material is even ordered, so plan the whole project around that calendar, not just the install days. Call (833) 968-1198 to schedule an estimate and get a timeline specific to your property.
Yes, always. A re-roof is a permitted project, and in Coral Gables the exterior review may also involve the Board of Architects depending on your property. We handle the permit application and design-review submittal as part of the job, and we don’t start until approvals are in hand. Call (833) 968-1198 and we’ll walk you through what your property needs.
Usually not, but it depends on what’s there now. Metal is lighter than tile, so on many Coral Gables tile roofs it actually reduces load, while on wood-framed additions it may need a structural check. We measure the decking and framing during the estimate and tell you before you commit whether structure is in scope. Call (833) 968-1198 for a free on-site inspection.
$15,000 to $40,000 depending on roof size, system, gauge, and decking condition. Standing seam with a premium finish and significant deck replacement sits near the top; a simpler profile on a sound deck sits lower. Every estimate is written line-item with no surprise change orders. Call (833) 968-1198 for an exact quote, and estimates are free.
Manufacturer warranty on the panels and finish, plus our 730-Day Done Right Promise covering the workmanship. If something isn’t right in that window, we make it right. We schedule a walk-through at completion so you have the paperwork in hand for your insurer and any future sale. Call (833) 968-1198 if you have questions about a roof you’re planning.
Get a free metal roofing estimate in Coral Gables
We’ll come out, measure the roof, check the decking, and talk through standing seam versus stone-coated steel on your actual home. You’ll get a written, line-item estimate and a realistic schedule that accounts for Coral Gables’ design-review cycle. Calls are answered by a live person around the clock. Call (833) 968-1198 for a free estimate, and remember: 0% financing for 18 months and $1,000 off projects over $10,000 are available.
Written by the team at Groundwork Construction Co.