Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Gladeview, FL: What the Job Actually Involves
A metal roof on a Gladeview home typically runs $15,000 – $40,000, installs in three to six days on a standard single-story house, and requires a Miami-Dade County permit plus wind-borne-debris-rated panels and fasteners because the 33147 ZIP sits inside the High-Velocity Hurricane Zone. We handle the county paperwork, the tear-off, and the final inspection as one job. Call (833) 968-1198 for a free on-site estimate and a written line-item quote before anything gets ordered.
How We Run a Metal Roofing Job Here, Stage by Stage
Metal roofing is a sequence job, not a weekend project, and the order matters more than most homeowners expect. Here’s the honest version of what happens between the first site visit and the final inspection.
Stage 1: Site survey and as-built check (1 – 2 days before the permit)
Before we touch the roof, we walk the house and document what’s actually there. On Gladeview’s mid-century block homes, that often means tracing how a rear addition was tied into the original roof structure and confirming wall heights match the plans. You’ll decide at this stage whether any soft spots in the decking get replaced as part of the job or flagged for a separate scope.
Stage 2: Permit submission through Miami-Dade County (roughly 2 – 4 weeks)
There’s no Gladeview city hall to file with, so the permit goes to the county, and the county wants product approval numbers for the panels, underlayment, and fasteners before it issues anything. We assemble that package. You don’t have to chase NOA documents yourself, but you should know the wait is real and it’s not something we can shortcut.
Stage 3: Tear-off and decking inspection (1 – 2 days)
Old shingles or tile come off down to the deck. The county inspector looks at the sheathing and the roof-to-wall connections before new material goes down. This is where unpermitted past work tends to surface, and it’s better to find it now than after panels are screwed on.
Stage 4: Underlayment and panel install (2 – 4 days)
Synthetic underlayment goes down first, then panels run from the eave up with concealed fasteners or exposed screws depending on the system you picked. You’ll have chosen your panel profile and color weeks earlier; at this stage the only decision is whether you want the ridge vent upgraded.
Stage 5: Final inspection and cleanup (1 day, plus a follow-up walk)
The county signs off, we magnet-sweep the yard for fasteners, and we walk the roof with you. The 730-Day Done Right Promise covers the workmanship from that walkthrough forward.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make Before the Panels Get Ordered
Metal roofing isn’t one product. The specs you pick drive both the price and how the roof performs through a South Florida hurricane season.
- Panel type: Exposed-fastener 5V crimp panels are the budget option, usually at the low end of the range. Standing seam with concealed fasteners costs more but has fewer penetration points, which matters in wind-driven rain country.
- Material: Galvalume steel is the standard workhorse. Aluminum resists salt better if you’re closer to the coast; copper is beautiful and expensive and rarely the right call here.
- Finish and color: A factory-applied Kynar finish holds color against South Florida UV far better than a post-paint job. Light colors reflect heat and keep attic temps down through July and August.
- Underlayment: A high-temp synthetic underlayment instead of felt. It’s a small line item and a big difference in how the roof ages.
- Decking repair allowance: Decide up front whether you want a fixed repair allowance written into the quote or a per-sheet price if rot shows up after tear-off.
If a gutter replacement or fascia work comes up during the install, that’s a separate scope we’ll quote rather than fold silently into the roof number.
What Metal Roofing Costs in Gladeview, FL
Metal roof installation in Gladeview runs $15,000 – $40,000 for a typical single-family home, with most jobs landing in the middle of that band. Five things push a project toward the low or high end:
- Roof size and pitch: Square footage is the biggest driver. A steep pitch slows the crew and adds labor.
- Existing condition: One layer of shingles tears off fast. Multiple layers, rotted decking, or a failing tie-in at an old addition adds days and dollars.
- Panel spec: Exposed-fastener panels sit at the bottom of the range; standing seam with concealed fasteners and a premium finish sits at the top.
- Complexity: Hips, valleys, dormers, and skylights cost more per square than a clean gable roof.
- Permit scope: If the county requires structural corrections at the roof-to-wall connection, that’s additional engineering and labor.
A written estimate from us itemizes tear-off, decking, underlayment, panels, fasteners, permit fees, and cleanup as separate lines. It won’t include solar mounting, interior ceiling repair from old leaks, or painting the fascia, and we’ll say so on the page.
See the difference
Before
After
Before
After
Before
AfterWhat Gladeview’s Housing Stock Does to a Metal Roofing Job
Gladeview is an unincorporated pocket of Miami-Dade wrapped around NW 79th Street, and there’s no city hall to file with. Every permit runs through the county, and the county’s High-Velocity Hurricane Zone rules apply even to a roof swap. On the 1940s – 1960s concrete-block homes common in 33147, we routinely find carports turned into bedrooms, rear add-on units, and room additions that were never permitted. When the county inspector sees a roof-to-wall connection that doesn’t match the plans, the fix has to happen before the roof passes. That’s the reality of working in this ZIP, and it’s why our site survey happens before the permit, not after. The subtropical climate adds its own pressure: intense UV breaks down underlayment and dulls cheap finishes, and the June – November hurricane season is the reason wind-borne-debris ratings aren’t optional here. If a full exterior scope is on your list, homeowners often pair this with Window Replacement in Gladeview or Impact Windows & Doors in Gladeview to keep the envelope consistent.
Serving Gladeview, FL – Our Local Coverage Area
We serve Gladeview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Metal Roofing in Gladeview
Most Gladeview metal roofing jobs take three to six days of active install, plus roughly two to four weeks for the county permit to issue. The permit wait is the part homeowners underestimate. Call (833) 968-1198 and we’ll give you a realistic start date based on current county timelines.
Yes. Because Gladeview is unincorporated Miami-Dade, the county issues the permit and inspects the work, and it requires product approval documents for the panels and fasteners. We pull the permit and manage the inspections. Call (833) 968-1198 with your address and we’ll tell you what the county will likely require.
Metal roofing in Gladeview typically costs $15,000 – $40,000 depending on roof size, panel type, and how much decking or structural repair the tear-off reveals. Call (833) 968-1198 for a free on-site estimate with line-item pricing.
In most cases yes. A metal roof replaces the covering, not the plumbing or interior layout, and structural work only comes up if the county inspection flags a bad tie-in or rotted framing. We’ll tell you at survey time whether your roof is the straightforward kind or the kind with surprises underneath. Call (833) 968-1198 to schedule the survey.
Every metal roofing project we complete is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction: if something isn’t done right, we make it right. Panel manufacturer warranties run separately and depend on the product you choose. Call (833) 968-1198 to talk through the coverage before you sign anything.
Get a Free Metal Roofing Estimate in Gladeview
Metal roofing is a five-figure decision, and the estimate should be free, in writing, and itemized before you commit. Call (833) 968-1198 to schedule an on-site visit. We’ll survey the roof, document what the county will require, and hand you a line-item quote with no surprises. A live person answers the phone around the clock, and your estimate comes at no cost. Take your time with it. We’d rather you understand the job than rush it.
Written by the team at Groundwork Construction Co. of Miami.