A Groundwork company - serving Miami, FL
Metal Roofing in Opa-locka, FL | Groundwork Construction Co. of Miami

Metal Roofing in Opa-locka - Free Roof Inspection, Written Price

Free roof inspection with photos, then an itemized written price before anything is ordered. Installed by a licensed local professional and backed by a workmanship warranty.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Metal Roofing in Opa-locka, FL: What You’re Actually Getting Into

Metal roofing in Opa-locka, FL runs $15,000 to $40,000 for most homes in the 33054 and 33055 ZIP codes, and a typical installation takes three to six days once the material is on site and the permit is approved. You’re buying a roof that should outlast the mortgage on a stucco-over-block house built between 1926 and 1955, which is why the spec conversation matters more here than it does on a newer home. Call (833) 968-1198 and we’ll walk the roof with you before anyone quotes a number.

Call (833) 968-1198

Key takeaways: expect $15K – $40K, plan on a 3 – 6 day install, expect an engineering review on any pre-1960 building with original masonry, and expect the panel profile and fastener spec to be the two decisions that move your price the most.

How a Metal Roof Goes On an Opa-locka House, Stage by Stage

Metal isn’t a one-day trade, and the order of operations is what keeps a South Florida roof from leaking in year three. Here’s the real sequence.

Stage 1: Roof inspection and structural review (1 – 2 days)

Before anything gets ordered, we get on the roof and into the attic. On Opa-locka’s older masonry buildings we’re looking for the trusses or rafters, the condition of the roof-to-wall connection, and whether the deck is original 1920s skip sheathing or something replaced later. On the 1926-era commercial and mixed-use buildings, this stage often triggers an engineer’s letter, because the original load-bearing walls weren’t framed to modern anchor schedules. You decide here whether to proceed with a structural repair scope alongside the roof.

Stage 2: Permit and product selection (1 – 3 weeks)

Opa-locka requires a roofing permit for a full metal re-roof, and the submittal needs the product approval numbers, the fastening schedule, and the wind-uplift calc. This is the longest calendar stretch of the project and the one homeowners underestimate. You’ll sign off on panel profile, color, and underlayment here. Nothing gets ordered until the permit is issued, so don’t schedule the family vacation around the install date.

Stage 3: Tear-off and deck prep (1 – 2 days)

Old shingles or failed metal come off, and the deck gets inspected board by board. Rotted fascia, soft sheathing, and rusted-through penetrations get replaced at this point. On these homes we frequently find water damage behind original stucco parapets and at the wall-roof junction, so budget a contingency. If the deck needs a full re-sheet, that’s a decision you’ll make with us on site, not three weeks later.

Stage 4: Underlayment, panels, and trim (2 – 4 days)

High-temp underlayment goes down first, then panels run in sequence, then the ridge, hips, valleys, and edge metal. Florida’s wind-driven rain means the underlayment and the panel interlock do the real work, not the panel face. Fasteners get set to the engineered schedule and every penetration gets flashed. We’re on the roof until the last trim piece is sealed.

Stage 5: Final inspection and handoff (1 day)

The municipal inspector signs off, we walk the roof with you, and you get the maintenance notes: what to check after storm season, how to keep debris off the panel seams, and where the fasteners live so nothing gets drilled through them later. Most jobs run 3 – 6 days of actual on-roof work. Schedule a free estimate and we’ll give you a real calendar, not a guess.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Choose Between on a Metal Roof

Metal is a category, not a product. These are the decisions that shape cost, lifespan, and looks on an Opa-locka roof.

  • Standing seam vs. exposed fastener panels. Standing seam is the concealed-fastener system with raised seams and a typical 40 – 50 year service life; it’s the higher-end option and costs more per square. Exposed-fastener panels (the 5V crimp and similar agricultural profiles) are cheaper and install faster, but the washer screws need re-checking after major storms. If your Opa-locka home has decorative parapets or a low-slope section, the profile choice may be forced by geometry rather than budget.
  • Panel gauge and finish. 24-gauge steel is the standard residential spec; 26-gauge is lighter and cheaper but dents more easily. Kynar 500 / PVDF finishes hold color far longer in South Florida’s UV load than standard polyester paint, which is why we push them here. The finish is what fails first on a cheap metal roof in this climate.
  • Color and heat reflectivity. A cool-rated light finish reflects solar gain and keeps attic temperatures down; dark finishes look stunning on a Moorish Revival façade but cook the attic. If you’re weighing this against attic insulation, that conversation belongs here.
  • Underlayment system. High-temp synthetic underlayment is standard; peel-and-stick ice-and-water shield is used at valleys and penetrations. This is the layer that keeps hurricane-driven rain out of the house, and it’s worth the upgrade.
  • Wind rating and attachment. Florida Product Approval drives the fastening schedule, and the panel selection has to match the uplift calc for your roof geometry. Boral and similar panel manufacturers publish approval numbers we submit with the permit.
  • Insulation and attic ventilation. A metal roof is the moment to add radiant barrier and rebalance attic ventilation, since the old roof is already gone. Deal with the deck and the attic while the roof is open, not in a second project.

What Metal Roofing Costs in Opa-locka, FL

For most Opa-locka homes, metal roof installation lands between $15,000 and $40,000. The low end is a straightforward exposed-fastener install on a sound deck; the high end is standing seam on a large, complex roof with structural repair and full trim work.

Line item Typical range
Metal roof installation, full tear-off and re-roof $15,000 – $40,000
Roof repair, isolated damage $400 – $1,800
Roof replacement, standard shingle for comparison $8,000 – $20,000

What pushes a metal job toward the top of that range:

  • Roof size and complexity. More hips, valleys, dormers and parapets means more trim, more hours, more material waste.
  • Structural scope. On pre-1960 Opa-locka buildings, non-standard framing, missing modern anchors, or wall-roof rot discovered during deck prep adds real dollars and requires engineering review.
  • Panel choice. Standing seam and 24-gauge Kynar-finished steel sit at the top of the market; exposed-fastener and lighter-gauge panels sit at the bottom.
  • Deck condition. A fully re-sheet-ready roof quotes low; one that needs sheathing and fascia replaced quotes higher.
  • Permit and inspection scope. A simple re-roof permit is standard; a project with a structural engineer letter, MVH or HOA review, or historic façade context is not.

A written estimate from us is line-item and covers labor, materials, permit, tear-off, disposal, and clean-up. What a written estimate typically does not cover is rot or structural repair discovered once the old roof comes off, and this is precisely why we inspect the deck and attic before quoting. Every price we put in writing is fixed for the scope shown; there are no change-order surprises, and the whole job is backed by our 730-Day Done Right Promise.

As part of a full Roofing in Opa-locka scope, we can also fold the metal roof into a larger exterior package if you’re already planning other work.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Opa-locka Homes Specifically Do to a Metal Roof Job

Opa-locka is home to the largest collection of Moorish Revival architecture in the Western Hemisphere, a 1926 themed development full of domes, arched openings, and ornate stucco detail. That history changes how a metal roof gets installed here in ways a contractor from Hialeah or Miami Gardens won’t anticipate. The 1926 Opa-locka Company buildings along Ali Baba Avenue and Sharazad Boulevard have load-bearing masonry walls with decorative parapets, and once walls get opened, we regularly find non-standard 1920s framing and no modern anchors. That means an engineering review before we fasten panels through the deck, and trim details that match the existing stucco profiles rather than a generic edge metal.

The housing stock is mostly 1920s – 1950s stucco-over-block single-family homes, many with original wood-frame windows and flat or low-pitch roofs. New construction is limited here, so most of what we do is renovation on aging historic fabric, not fresh-build replacement. The climate compounds it: intense sun, heavy summer rains, and hurricane-season wind-driven rain make underlayment quality and reinforced roof-to-wall connections the difference between a roof that lasts and one that doesn’t. The permit and inspection process in the 33054 and 33055 ZIP codes follows Miami-Dade product approval requirements, and where a property sits in the preservation-overlay conversation, we coordinate the review before demo day rather than after. Homeowners often pair this with Window Replacement in Opa-locka to close up the envelope at the same time.

You can see everything we cover across the area on the Opa-locka service page, and the full scope of our Roofing service is available there as well.

The wind rating and panel attachment requirements in this coastal market often lead homeowners to consider Impact Windows & Doors in Opa-locka as a companion upgrade once the roof is done.

Serving Opa-locka, FL – Our Local Coverage Area

We serve Opa-locka and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked: Metal Roofing in Opa-locka

Get a Free Metal Roofing Estimate in Opa-locka

If you’re ready to price metal roofing in Opa-locka, call (833) 968-1198. A live person answers, day or night. We’ll schedule a free on-site visit, inspect the roof and attic, and give you a written, line-item estimate with the structural and permit scope spelled out. No change-order surprises, transparent pricing, and a roof built to handle what this climate throws at it.

Written by the team at Groundwork Construction Co.

Why Opa-locka Chooses Groundwork Construction Co. of Miami

We set the standard for metal roofing in Opa-locka.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Opa-locka

Getting your metal roofing project started is simple.

1

Call or Request a Free Estimate

Tell us about your metal roofing project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local metal roofing pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Opa-locka Customers Say

Trusted by homeowners across Opa-locka and surrounding areas.

★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong

Ready for Metal Roofing in Opa-locka?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Opa-locka.

(833) 968-1198

Request a Free Estimate in Opa-locka

Tell us about your metal roofing needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch