Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterMetal Roofing in Miami, FL
Metal roofing in Miami usually costs between $9 and $16 per square foot installed, and a typical single-family home runs $18,000 to $42,000 depending on the panel type, roof pitch, and how much of the old roof has to come off first. It’s the roof material that holds up best to salt air, 150-mph hurricane gusts, and the afternoon sun that cooks asphalt shingles into powder by year twelve. Groundwork Construction Co. of Miami installs standing seam and metal shingle systems with the fasteners, underlayment, and wind ratings Miami-Dade County actually requires, and we back the whole job with our 730-Day Done Right Promise. Call (833) 968-1198 and a live person picks up, day or night.
This page covers the metal side of our Roofing work. If you’re still deciding between materials, start there. If you already know you want metal, keep reading. We’ll go through the panels that survive South Florida, what drives the price here, and the honest trade-offs nobody puts on a brochure.
Key Takeaways
- Metal roofing in Miami runs roughly $9-$16 per square foot installed, or $18,000-$42,000 for most single-family homes.
- Standing seam and metal shingles carry wind ratings that meet or exceed Miami-Dade’s high-velocity hurricane zone code.
- Metal reflects heat instead of absorbing it, which cuts attic temperatures and cooling bills in a city where the AC runs most of the year.
- Most residential metal re-roofs here are completed in three to six days, weather permitting.
- Our technicians have up to 12 years of experience, and every project carries the 730-Day Done Right Promise.
When You Need Metal Roofing
Homeowners call us about metal for a handful of recurring reasons. Some are urgent, some are about getting ahead of a problem before hurricane season does it for them.
- Your asphalt shingles are failing early. In Miami, shingle roofs regularly give out in 10 to 14 years rather than the 20-plus promised up north. The combination of UV intensity, heat cycling, and salt-laden air accelerates granule loss. If you’re seeing bare spots and granules in the gutters on a roof that isn’t that old, metal is worth pricing before you pay for another shingle job that fails the same way.
- You’re in a flood or wind-insurance squeeze. Some carriers offer premium credits for impact-rated metal roof systems with documented Miami-Dade NOA approval. We provide the product approval paperwork so your insurer can verify the rating rather than take your word for it.
- Your current roof leaks after every summer storm. Ponding water, blown-off ridge caps, and lifted flashing around vents and chimneys are common in older Coral Gables and Little Havana homes. If you’ve patched the same leak three times, the roof is telling you something.
- You’re planning a re-roof and want the last one you’ll buy. A properly installed metal roof can last 40 to 70 years. For a homeowner in Pinecrest or Palmetto Bay who plans to stay, it’s often the lower lifetime cost even when the upfront number is higher.
- You’ve added solar or plan to. Standing seam metal accepts clamp-on solar mounts without drilling through the roof surface. That keeps the warranty intact and the penetrations at zero.
If any of those sound familiar, we’ll come out and give you a straight assessment. No pressure to buy metal if a repair solves it for now. But if the roof is at the end of its run, you’ll know what a metal replacement actually costs before you commit.
How Long Does a Metal Roof Last in Miami?
A properly installed metal roof in Miami typically lasts 40 to 70 years, with the panel finish and coastal exposure being the biggest variables. Salt air is the quiet enemy here.
Homes east of US-1, closer to Biscayne Bay and the Atlantic, see faster finish degradation than inland properties because airborne chloride attacks the paint coating. That’s why we steer coastal customers toward 26-gauge steel with a PVDF (Kynar 500) finish rather than thinner 29-gauge panels or bare galvanized. The heavier gauge resists oil-canning, holds fasteners better in high wind, and the PVDF coating holds color far longer under salt spray. Inland, a 24-gauge standing seam panel does the job and gives you a cleaner, flatter profile.
Aluminum is another option for the most exposed coastal properties, since it doesn’t rust. It costs more per square foot, but for a home on Key Biscayne or along the Miami Beach edge, that extra cost can be the difference between a 30-year roof and a 50-year one.
Our Metal Roofing Process
Metal roofs fail at the details, not the panels. Most of our work is making sure the deck, the underlayment, and the fastening pattern are right before a single panel goes down.
- On-site inspection and measurement. We measure the roof, check the deck condition, and look at pitch, valleys, and penetrations. If the existing decking is soft or the framing has issues, we tell you before the bid, not after tear-off.
- Upfront written estimate. You get a line-item price with the panel type, gauge, finish, underlayment, and labor spelled out. The number you see is the number you pay. No surprise change orders halfway through the job.
- Permitting with Miami-Dade County. Metal re-roofs in the high-velocity hurricane zone require a permit and product approval documentation. We handle the paperwork and pull the product NOA so the inspection passes the first time.
- Tear-off and deck repair. Old roofing comes off, the deck gets inspected and any soft sheathing gets replaced. We install a high-temperature synthetic underlayment suited for metal, since traditional felt can degrade under the heat metal transmits.
- Panel installation. Standing seam panels are formed and fastened with concealed clips so there are no exposed fasteners on the field of the roof. Metal shingles get installed to the manufacturer’s nailing pattern and wind-uplift spec. Ridge, hip, and valley flashing are all formed to matching spec.
- Final inspection and walkthrough. We walk the roof with you, show you the flashing details, and hand over the manufacturer warranty and our 730-Day Done Right Promise in writing. If anything’s off in the first two years, we come back and make it right.
Standing Seam vs. Metal Shingles: Which Is Right for Your Miami Home?
Standing seam is the better choice for wind resistance, longevity, and solar compatibility. Metal shingles are often the better fit for homes in historic districts or neighborhoods with architectural review rules.
Standing seam panels run in long vertical strips with raised seams every 12 to 16 inches. The fasteners are hidden, the wind uplift rating is higher, and the clean lines suit modern and contemporary homes. They cost more per square foot because the panels are formed to length and the installation is more labor-intensive.
Metal shingles mimic the look of tile or shake and install in smaller, overlapping pieces. They’re a good option in Coral Gables or Miami Shores, where a modern panel profile would clash with the neighborhood. Wind ratings are still strong, they just aren’t quite at standing seam’s level, and there are more seams that can fail if installed poorly.
We’ll show you samples of both and walk you through the price and performance difference in person so you’re deciding with real numbers, not a brochure.
Metal Roofing Pricing in Miami
Metal roofing in Miami typically runs $9 to $16 per square foot installed, which works out to roughly $18,000 to $42,000 for a typical single-family home. The range is wide because panel type, gauge, roof complexity, and deck condition all move the number.
| Line Item | Typical Range (Miami) |
|---|---|
| Standing seam steel, 24-gauge, installed | $12-$16 per sq ft |
| Standing seam steel, 26-gauge, installed | $10-$13 per sq ft |
| Metal shingles, installed | $9-$14 per sq ft |
| Aluminum standing seam (coastal), installed | $14-$20 per sq ft |
| Tear-off of existing roof | $1,500-$4,500 |
| Deck repair / sheathing replacement | $2-$5 per sq ft (as needed) |
| Permit and inspection fees | $400-$1,200 |
| Flashing, ridge, and trim | $60-$120 per linear ft |
What Drives the Price Up or Down
- Roof pitch and complexity. A simple gable roof costs less than a hip-and-valley with multiple dormers. Steep pitches slow installation and raise labor.
- Panel gauge and finish. 26-gauge costs less than 24-gauge. PVDF finishes add cost over standard painted finishes, but hold up far better in coastal salt air.
- Deck condition. If we open the roof and find rot, it has to be replaced. We do our best to flag this during the inspection.
- Access and height. A two-story home with limited side-yard access for material staging costs more than a single-story ranch with a wide driveway.
- Solar or skylight penetrations. Every penetration needs proper flashing and sealing, and each adds labor.
We give you the full line-item price upfront, and we don’t move the number once work starts. If you’re bundling the roof with other work, our $1,000 off projects over $10,000 and 0% financing for 18 months apply. We also do a free project estimate and design consult so you can get real numbers without committing to anything.
Does Metal Roofing Meet Miami-Dade Hurricane Code?
Yes, when the correct product and installation method are used. Miami-Dade is in the high-velocity hurricane zone, and metal roofing products must carry a current Miami-Dade Notice of Acceptance (NOA) or Florida Product Approval that documents their wind-uplift rating.
This is where cheap metal jobs fall apart. A contractor who installs a panel without the right NOA number or fastens outside the manufacturer’s specified pattern can pass visual inspection and still fail structural performance in a storm. We pull the correct NOA for every job and install to that spec. When the inspector arrives, the paperwork and the installation match. We hand you a copy of the NOA at the end, which your insurance company may want for a wind-mitigation credit.
Impact-rated metal systems, paired with the right underlayment and fasteners, are among the most storm-resistant residential roof options you can buy in Miami. That’s exactly why we install them here.
Do You Offer Metal Roof Repair or Just Replacement?
Both. Metal roofs can develop fastener back-out, lifted seams, and flashing failures at penetrations, and all of those are repairable. If the roof is still within its service life, we’ll find the actual leak source and fix it rather than talk you into a full replacement.
Back-out is more common on exposed-fastener metal shingles than on standing seam. Lifted seams usually trace to installation error or thermal movement. Flashing failures are the most common leak source on all metal roofs, and they’re almost always around chimneys, vents, and skylights. We’ll scope the repair honestly and give you a price before we touch the roof. If a repair will hold for five more years, we’ll say so. If the roof is past its useful life, we’ll say that too.
Can You Install Metal Roofing Over Existing Shingles?
It’s possible in some cases, but we don’t recommend it in Miami, and most local code allowances don’t make it worth the risk. A metal roof installed over old shingles traps heat, hides deck rot, and can void the manufacturer’s wind warranty if the substrate isn’t flat and sound.
The other problem is weight and ventilation. Layering metal over shingles adds load to the structure and creates conditions where moisture can get trapped between the two layers. In a climate that swings between blazing sun and daily downpours, that trapped moisture leads to rot and mold. We recommend a full tear-off to bare deck, inspection, and proper underlayment on every metal install. It costs more upfront, but it’s the only way we can stand behind the roof with a 730-Day Done Right Promise.
How Long Does a Metal Roof Installation Take?
Most residential metal re-roofs in Miami are completed in three to six days, weather permitting. Standing seam installs on a simple roof can finish faster; complex rooflines with multiple valleys and penetrations take longer.
Rain is the wild card. We don’t leave a roof open overnight if we can help it, and we schedule around the forecast. If a storm rolls in mid-job, we dry in the roof with temporary underlayment before we leave for the day. If you have a schedule constraint like a home sale or insurance inspection, tell us upfront and we’ll plan the work around it.
Why Choose Groundwork Construction Co. for Metal Roofing in Miami?
We install metal on a specific set of principles: correct product, correct fasteners, correct paperwork, and a warranty that means something.
- 730-Day Done Right Promise. If the work isn’t done right in the first two years, we come back and make it right. That’s one of the longest workmanship guarantees in residential construction.
- Live person, 24/7. Call (833) 968-1198 any hour and a real person answers. No voicemail, no waiting for Monday.
- Background-checked, uniformed technicians. The crew that shows up is vetted, arrives in uniform, and is identifiable. No unmarked vans at your curb.
- Upfront pricing, no surprises. The estimate is the price. We don’t discover a “change” halfway through and send you a bigger bill.
- Trusted material partners. We install systems from manufacturers with current NOA approvals and real-world performance in South Florida weather. If we can’t stand behind the panel, we don’t install it.
- Experience on the install side. Our technicians have up to 12 years of experience with metal systems, flashing, and wind-rated fastening patterns.
You can see the full range of what we handle on our Miami service area page, and you can read up on the rest of our Roofing work for tile, shingle, and flat roof options if metal isn’t the right fit for your home.
FAQs – Metal Roofing
How much does metal roofing cost in Miami?
Metal roofing in Miami typically costs $9 to $16 per square foot installed, or roughly $18,000 to $42,000 for a typical single-family home. Standing seam at the higher gauge and aluminum panels in coastal areas push toward the top of that range, while metal shingles and 26-gauge panels sit lower. Call (833) 968-1198 for a free, line-item estimate on your roof.
Does a metal roof increase home value in Miami?
A metal roof often increases resale value in Miami because buyers here know what hurricane-rated roofing is worth and what asphalt shingles cost to replace. Insurers frequently offer wind-mitigation credits for approved metal systems, which strengthens the resale story. Actual value added depends on the home, the neighborhood, and the buyer, so we recommend pairing metal with the rest of the home’s condition rather than viewing the roof as a standalone upgrade.
Will a metal roof make my house hotter?
No. A metal roof with a reflective finish actually reduces heat gain compared to dark asphalt shingles, which absorb and radiate heat into the attic. In Miami, where summer temperatures push 90+ for months, that difference shows up in attic temps and cooling bills. We install metal over proper underlayment with ventilation reviewed so the roof performs as designed, not as a heat trap.
Is metal roofing noisy in the rain?
Not in a properly built home. The noise people associate with metal roofs comes from bare panels installed on an open purlin structure, like a shed or barn. When metal is installed over solid decking and underlayment on a residential home, rain noise is comparable to or quieter than a shingle roof. Florida’s afternoon downpours aren’t going to sound like a drumline in your living room.
Can you match a metal roof to my neighborhood’s look?
Often yes. Metal shingles can mimic tile or shake profiles, which is the typical solution for homes in Coral Gables, Miami Shores, and other neighborhoods with architectural review rules. Standing seam is less flexible for historic-look requirements but can work where the review board permits a more contemporary profile. We’ll show samples and check what your neighborhood’s review board accepts before you commit.
Do you offer financing on metal roofing in Miami?
Yes. We offer 0% financing for 18 months and $1,000 off projects over $10,000. Metal roofs are a larger upfront investment than shingles, and financing lets you spread that cost without paying interest during the promo period. We’ll walk you through the options when we give you your estimate.
Can you come out today for a metal roofing estimate?
Same-day and next-day appointments are often available. We answer live 24/7, so call (833) 968-1198 any time and we’ll find the earliest slot that works for your schedule. Estimates are free, and we do on-site measurements so the numbers are real, not guesses.
Ready for a metal roof that survives Miami weather? Call Groundwork Construction Co. of Miami at (833) 968-1198 for a free estimate. A live person answers around the clock, and every metal roofing project we take on is backed by the 730-Day Done Right Promise and upfront pricing you can count on.
Written by the team at Groundwork Construction Co. of Miami, serving Miami.