Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Miami, FL: What the Job Actually Involves
An aluminum fence in Miami typically runs $4,720 to $11,800 depending on linear footage, height, and finish, and most residential yards are finished in 2 to 4 working days. The panels arrive pre-assembled; the real time goes into setting posts on proper footings and confirming the layout clears your property line. If you’re pricing this out, call (833) 968-1198 and we’ll walk your yard, measure, and hand you a written number. Our technicians have up to 12 years of experience installing ornamental aluminum across the county.
How We Run an Aluminum Fence Install, Start to Finish
There’s no mystery to a good aluminum fence, but there is a sequence, and skipping a step is how fences end up leaning after a storm. Here’s how a typical job goes.
Stage 1: On-site measure and layout (day 1, about an hour)
We walk the property with you, confirm the boundary against your survey, and mark post locations with paint. This is where you decide fence height, gate placement, and whether you’re going to need a double gate for boat or RV access. If you don’t have a recent survey, that costs you a delay, so pull it out early.
Stage 2: Utility locate and permit (day 1, before any digging)
Florida law requires a free utility locate before excavation, and we schedule that as soon as the layout is set. For most residential aluminum fence work, a permit isn’t required, but Miami-Dade has both height limits and setback rules, and HOAs are stricter still. We verify which apply to your lot before we touch a shovel.
Stage 3: Post setting (day 2, the longest stage)
Posts get set in concrete footings sized to the panel height and wind exposure. On a standard 4-foot ornamental run, we set posts roughly every 6 to 8 feet. Footings need to cure before panels go on, which is why a fence install usually has a built-in pause day.
Stage 4: Panel and gate hang (days 3 and 4)
Panels drop into the post channels, rails get leveled and secured, and gates are hung with hinges set for proper swing and self-closing hardware if you’re using it. You’ll want to be present for gate swing direction and latch height.
Stage 5: Walkthrough and touch-up
We check every panel for plumb, verify gate clearance, and touch up any scratches at cut points with matching paint. Then we do a final walk with you. If something’s off, the 730-Day Done Right Promise means we come back and make it right, not argue about it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Aluminum Fence Options You’ll Choose Between
- Residential-grade vs. heavy-duty aluminum: Residential panels suit most yards and cost in the lower half of the $4,720-$11,800 range. Heavy-duty, thicker-wall aluminum costs more but resists the salt air and wind loading better, and it’s what we recommend for homes near Biscayne Bay or on open lots without neighboring windbreaks.
- Rackable vs. standard panels: Standard panels work on flat ground. Rackable panels angle with a slope, which matters on Miami lots with a grade change or a swale near the street. Racking adds cost but avoids a stepped, gap-prone fence line.
- Powder-coat finish and color: Black, bronze, and white are the standard powder coats, and a quality finish is what keeps aluminum from chalking in the Florida sun. Cheap finishes fade within a few years.
- Gate style and hardware: Single walk gates, double-drive gates, and self-closing hinges with a latch are all add-ons. A self-closing, self-latching gate is the pool-safety configuration, and it costs more than a basic hinge.
- Height and picket spacing: 4-foot is the residential standard; 5-foot and 6-foot run higher. Tighter picket spacing costs more but offers more privacy and excludes small animals.
What an Aluminum Fence Costs in Miami, FL
Residential aluminum fence in Miami runs $4,720 to $11,800, and that range covers the full installed job: posts, footings, panels, gate, hardware, and cleanup. Here’s what moves a job toward one end or the other.
- Linear footage: The single biggest lever. A small front-yard run sits near the low end; a full perimeter around a quarter-acre lot pushes toward the top.
- Height and grade: A 5- or 6-foot fence with racking on sloping ground costs meaningfully more than a 4-foot flat run.
- Number and style of gates: Every gate is priced separately. A wide double drive gate is a bigger line item than a walk gate.
- Site access and old fence removal: Tight side yards, pool equipment in the way, or an old fence that needs hauling off all add labor.
- Finish and aluminum gauge: Premium powder coat and thicker-wall aluminum raise the material cost, and it’s money that holds up in coastal humidity.
A written estimate from us lists the footage, post count, gate count, hardware, and any removal line by line, so the number you see is the number you pay. What’s typically not included: survey costs if you need one, HOA application fees, and any landscaping repair beyond the fence line itself. Call (833) 968-1198 for an exact quote; estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Miami Homes Specifically Do to This Aluminum Fence Job
Miami is the only place in the country with its own product-approval system, the Miami-Dade NOA number, and while that governs roofs, windows, and shutters more directly, the same wind-conscience runs through every exterior install here. This is the High Velocity Hurricane Zone, and an aluminum fence near the coast has to be anchored for wind uplift, not just for looks. Salt-laden air off Biscayne Bay pits and oxidizes cheap finishes fast, so powder coat quality matters more here than in a landlocked market. We work on the pre-1970s concrete-block and CBS homes throughout Coral Way and Little Havana, plus the post-2000 high-rises along Brickell, and each poses a different fencing question. On older blocks, the lot line often runs along a swale, and a post set in that low ground needs attention. Buildings at the 40-Year Recertification threshold in neighborhoods like Coconut Grove bring their own coordination issues, since property-line work has to respect what’s already documented. If your aluminum fence is part of a full Fence Installation in Miami plan that includes other materials, we scope it together. Homeowners often pair this with Driveway Repair & Replacement in Miami when the fence line meets a cracked driveway apron, or with Patios, Walkways & Pool Decks in Miami when a pool barrier is in play.
Serving Miami, FL – Our Local Coverage Area
We serve Miami and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Aluminum Fence in Miami
Most residential aluminum fence jobs finish in 2 to 4 working days, with a curing pause between post setting and panel hang. Longer runs, multiple gates, and old-fence removal push it toward the upper end. We give you a day-by-day schedule in the estimate, so call (833) 968-1198 to get yours.
Most residential aluminum fences don’t require a permit, but Miami-Dade height limits, setback rules, and HOA covenants do apply, and some lots near the water carry stricter rules. We check what your specific lot requires before work starts. Call (833) 968-1198 and we’ll tell you what applies to your address.
A residential aluminum fence in Miami runs $4,720 to $11,800 installed, driven mainly by linear footage, height, and gate count. Premium finishes and heavy-duty aluminum for coastal wind exposure sit near the top of that range. Call (833) 968-1198 for an exact quote; estimates are free.
Yes, in most cases we route around irrigation lines and set posts with minimal disturbance, though existing sprinkler heads and low-voltage lighting at a post location have to be relocated or capped. We flag those at the layout stage so there are no surprises. Call us to schedule a walkthrough.
Every aluminum fence we install carries the 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship on posts, panels, and gate hardware for two full years. Call (833) 968-1198 to schedule your free estimate.
Get a Free Aluminum Fence Estimate in Miami
We’ll come out, measure your line, verify utility locates and any HOA or county rules that apply, and hand you a written, line-item estimate for your aluminum fence in Miami. No pressure, no surprise add-ons after the fact. Our team knows this city’s wind exposure and older lots, and we back the work in writing for 730 days. Call (833) 968-1198 to schedule your free estimate, and a live person answers, any hour. Learn more about our Fence Installation service and the wider Miami area we cover.
Written by the team at Groundwork Construction Co.