Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Gladeview, FL
Walk-In Showers & Shower Remodeling in Gladeview typically runs $9,000 – $28,000, with a straightforward curbless shower build landing closer to the $4,500 – $12,000 range and a full bathroom gut-out with new shower, tile, plumbing and finishes landing at the top. Plan on two to four weeks of active construction, longer if we’re relocating the drain or opening a wall. Call (833) 968-1198 to schedule a free on-site estimate.
How the Work Actually Runs, Start to Finish
Every walk-in shower we build in Gladeview follows the same sequence, because skipping a stage is how showers leak into the room below six months later. Here’s what actually happens after you approve the estimate.
Stage 1: Demo and substrate inspection (days 1 – 2)
We pull the old shower pan, wall tile, backer board and any framed curb, and we open the wall to see what’s behind it. In this ZIP the reveal matters more than on newer stock: we’re routinely looking at 1940s – 1960s concrete block with old copper or galvanized supply lines and cast-iron or lead drains. You decide nothing at this stage. We photograph everything and tell you what we found.
Stage 2: Rough-in and framing (days 2 – 4)
If the drain moves or the valve goes to a new wall, this is where it happens, along with blocking for grab bars and a bench. The rough plumbing and any electrical for lighting or a vent fan get inspected before anything closes up. You confirm the drain location and valve height now, not later.
Stage 3: Waterproofing (days 4 – 6)
Sloped mortar bed or a foam pan, a bonded waterproof membrane on the walls, and a flood test we document. This is the quiet stage that determines whether the shower lasts. Nobody should rush it. We don’t.
Stage 4: Tile, glass and fixtures (days 6 – 12)
Wall and floor tile, grout, sealant, then the glass panel or door, the showerhead, valve trim and any niche shelving. You’ve already picked these at the estimate, so this stage is execution, not decisions.
Stage 5: Final inspection, punch list and walkthrough (days 12 – 14 and beyond)
County inspection, a wet test of the drain and pan, and a walkthrough with you in the room. Anything on the punch list gets handled before we call the job complete. Everything we build carries the 730-Day Done Right Promise: if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the design conversation comes down to five decisions. Here’s the honest trade-off on each, not the brochure version.
- Shower pan style: a curbless, roll-in pan with a linear drain looks clean and ages well, but it costs more to build because the floor has to be recessed or the whole room raised. A low-profile curb keeps costs down and still gives you a wide entry. Aging-in-place households usually want curbless.
- Wall material: large-format porcelain tile or a slab-look panel reads upscale and grouts less, but it’s the pricier finish and unforgiving of a bad substrate. Traditional ceramic tile is the budget-friendly workhorse. Cultured marble is the easiest to clean and the least interesting to look at.
- Glass: a frameless panel with a fixed return is the standard for a walk-in, and it’s what buyers expect. Semi-frameless saves a few hundred dollars and shows more metal.
- Fixtures: a thermostatic valve, a rain head and a hand shower is the current default. Kohler and similar brands are worth the upcharge on the valve specifically, since it’s the one part you can’t easily replace later.
- Ventilation: a properly sized exhaust fan, on a timer or humidity sensor, is not optional in South Florida humidity. It’s the cheapest insurance against mold in the wall cavity.
Homeowners often pair a shower rebuild with a wider project scope, and that’s where our Bathroom Remodeling in Gladeview covers the flooring, vanity and lighting in the same permit.
What Walk-In Showers & Shower Remodeling Costs in Gladeview, FL
Most walk-in shower projects in Gladeview land between $4,500 and $12,000 for the shower itself, and $9,000 – $28,000 when the shower is part of a full bathroom renovation. A same-footprint shower replacement runs $3,000 – $8,500. Here’s what moves the number from the low end to the high end:
| Variable | Effect on price |
|---|---|
| Size and layout | A standard 36×60 alcove is the low end. A 5×6 walk-in with a bench and linear drain adds $2,000 – $4,000. |
| Existing condition | Rotted framing, a failed pan or cast-iron drain replacement adds $800 – $2,500. |
| Moving plumbing or structure | Relocating the drain or valve to a new wall adds $1,500 – $3,500 and a longer timeline. |
| Material grade | Builder ceramic versus large-format porcelain or slab panels moves the number by $2,000 – $5,000. |
| Permit scope | Drain and valve changes require a plumbing permit through Miami-Dade County. Finish-only swaps may not. |
A written estimate from us lists tile by line item, fixtures by model, labor, permit fees and disposal separately. It doesn’t list the things that usually show up as change orders: what’s behind the wall, framing repairs and substrate replacement are called out as a contingency with a disclosed per-item range. Upfront pricing means the number you see is the number you pay unless you add scope. Standard promotions apply: $1,000 off projects over $10,000 and 0% financing for 18 months.
See the difference
Before
After
Before
After
Before
AfterWhat Gladeview Homes Specifically Do to This Job
Gladeview sits in unincorporated Miami-Dade, wrapped around NW 79th St in the 33147 ZIP, and that has a real, practical effect on your shower project: there’s no city hall to call. Permits go through Miami-Dade County, and the county runs a stricter review than many of its incorporated neighbors. Work in the High-Velocity Hurricane Zone means our products and assemblies are spec’d to the county’s approved product list, including the glass and anchoring. It’s the same review reality that governs our Roof Replacement & Installation in Gladeview work, and it’s why a contractor who claims to skip the permit is warning you off, not reassuring you.
The housing stock does the rest. Much of 33147 is 1940s – 1960s concrete block and terrazzo, and a lot of it has been expanded over decades with unpermitted additions: carports turned into bedrooms, rear add-on units, walls moved without a drawing. When we open a shower wall in a Gladeview home, we occasionally find plumbing that was never inspected. The county’s recertification and inspection process catches these, and they have to be brought to code before financing or a sale closes. We survey before demo so there are no surprises after the tile is off.
The subtropical climate makes the build choice too. High humidity and intense UV mean mold-resistant assemblies and a real exhaust fan, not a decorative one. Summer downpours expose the smallest flashing mistake around a shower niche or a window in the same room. We treat waterproofing as the core of the job, not the cosmetic part. Our Bathroom Remodeling team handles this scope across the Gladeview area, so if a shower is the priority and the roof is on the list too, we can schedule both without two contractors on site.
Serving Gladeview, FL – Our Local Coverage Area
We serve Gladeview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Gladeview
A typical walk-in shower remodel takes two to four weeks of active construction, and a shower replacement inside an existing footprint can be done in about 10 to 14 days. The variables are whether the drain moves, whether the county inspection adds scheduling time, and lead time on glass and tile. Call (833) 968-1198 and we’ll give you a stage-by-stage timeline with your estimate.
Yes, if plumbing, electrical or structural work is involved, which means almost every walk-in build. Because Gladeview is unincorporated, the permit goes through Miami-Dade County rather than a city building department, and the county reviews to High-Velocity Hurricane Zone standards. We pull the permit and arrange the inspections. Call (833) 968-1198 to talk through your project.
Often, yes. If the drain and valve stay where they are, a same-footprint shower replacement runs $3,000 – $8,500 and doesn’t require a plumbing permit in most cases. Moving the drain, adding a bench or taking out a wall changes the scope and adds $1,500 – $3,500. We’ll tell you at the estimate which category you’re in. Call (833) 968-1198 for a free on-site look.
Expect $4,500 – $12,000 for a standalone walk-in shower and $9,000 – $28,000 for the shower as part of a full bathroom renovation. Tile grade, drain relocation, existing condition and permit scope are the four things that move the price most. Call (833) 968-1198 for an exact quote – estimates are free.
Every walk-in shower we build is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship on the waterproofing, tile and fixture installation for two full years, one of the longest residential workmanship guarantees in the space. Calls are answered by a live person 24/7, so a question doesn’t wait until Monday.
Get Your Free Walk-In Shower Estimate in Gladeview
We’ll come to your home, measure the existing shower, look at what’s behind the wall and hand you a written, line-item estimate with the permit scope spelled out. No pressure to sign on the spot. Walk-In Showers & Shower Remodeling in Gladeview is what we do, and the estimate is free. Call (833) 968-1198 to schedule yours.
Written by the team at Groundwork Construction Co. of Miami.