Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Miami Springs, FL: What It Runs and How Long It Takes
A tub-to-shower conversion in Miami Springs typically costs $4,130 – $11,800 and takes 3 – 6 working days from demo to final caulk. You’re pulling out the old tub, reworking the drain and valve, waterproofing the walls, and setting a new shower base and tile in the same footprint. Call (833) 968-1198 and we’ll schedule a free on-site estimate, written line-item, upfront pricing with no surprises.
The tub is failing and the footprint isn’t changing: how we actually build the shower
Most of the calls we take in Miami Springs start the same way. A 1950s home on one of the blocks off Curtiss Parkway, original cast-iron tub on a raised platform, tile that was set when Eisenhower was in office, and a shower valve that now runs hot for two seconds and then goes cold. The tub drains slow, the wall behind it is soft near the floor line, and the homeowner wants a walk-in shower with room to move.
Here’s the real sequence we follow. Stage one is demo and rough opening, day one through day two, and it is where the surprises live.
- Stage 1 – Demo and expose (4 – 8 hours). We pull the tub, cut back the surround to studs or block, and open the valve wall. On Miami-Dade homes built before about 1960 the tub often sits on a mortar bed over a concrete slab, so removal is chipping, not lifting. Your decision here: confirm the new shower size while the opening is visible, because that’s the cheapest moment to change it.
- Stage 2 – Plumbing and valve relocation (3 – 5 hours, same or next day). We reposition the drain to the new shower base, swap the valve, and move the showerhead and controls to a comfortable height. If you want a niche or a bench, we frame it now. Your decision: single-handle pressure-balance valve versus a thermostatic valve, and whether you want a hand-held on a slide bar.
- Stage 3 – Waterproofing and rough inspection (4 – 6 hours plus inspection scheduling). We install a bonded waterproofing membrane on the walls and a pre-sloped, curb-appropriate base system, then the rough plumbing inspection happens before anything gets closed. In Miami Springs, the town’s own building department signs off, not the county, and that’s a real scheduling factor we plan around.
- Stage 4 – Tile, setting, and grout (2 – 3 days). Wall tile goes up, floor tile sets to slope, then grout and seal. Your decision: tile size and format. Large-format porcelain means fewer grout lines and faster cleaning; a 4-inch mosaic floor tile grips better underfoot on a wet floor. This stage is where the look gets locked in, so pick your tile before demo day, not during.
- Stage 5 – Glass, trim, and final walkthrough (3 – 4 hours). Glass panel or framed door goes in, fixtures and trim finish, we caulk, we clean, and we walk the job with you. Any punch-list item is handled before we call it done.
Total elapsed time is usually 3 – 6 working days, and inspection scheduling can add a day or two. Most jobs run in a single visit sequence, and the whole thing is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What you’re choosing between once the tub is out
The decisions that shape both the budget and how the shower feels ten years from now come down to five categories. Here’s the honest trade-off on each.
- Shower base: pre-fab pan versus tiled mud bed. A molded acrylic or solid-surface pan costs less and installs faster, with no grout to maintain. A tiled mud bed with a linear or center drain looks custom and lets you match the floor tile, but it costs more and depends entirely on correct slope work. If the waterproofing or the slope is wrong, you find out in a year.
- Wall surface: tile versus solid-surface panels. Porcelain or ceramic tile gives you the widest design range and holds value. Large-format panels in a cultured marble or solid-surface material cut grout lines to almost nothing and go up in a day, but they limit your look and can’t easily be patched.
- Waterproofing system. A bonded sheet or liquid-applied membrane behind the tile is not optional in a wet Florida bathroom – it’s the difference between a shower that lasts and one that grows mold behind the wall. This is the line item you should never let a bidder skip.
- Glass. Frameless glass looks sharpest and is easiest to squeegee clean; a framed door or a simple fixed panel with an open walk-in entry costs less and holds up well in a busy house. On a narrow Miami Springs bathroom, a fixed panel often beats a swinging door for space.
- Fixtures and valve. A pressure-balance valve keeps the temperature steady when someone flushes a toilet; a thermostatic valve adds precise control and costs more. Brands like Kohler hold up well and carry parts availability for the long haul, which matters more than the finish.
What Tub-to-Shower Conversion costs in Miami Springs, FL
Plan on $4,130 on the low end and $11,800 on the high end for a conversion in Miami Springs, assuming the footprint stays put. A straight swap – same drain location, standard acrylic pan, ceramic tile, framed glass – lands near the bottom. A tiled mud-bed base, large-format porcelain, a relocated valve wall, a niche and bench, and frameless glass pushes toward the top.
The variables that move the number:
- Existing condition. Soft framing, a rusted cast-iron drain, or a slab that needs patching adds labor and materials. Old cast-iron tubs on mortar beds take longer to remove than a modern acrylic tub.
- Plumbing and electrical moves. Relocating the drain line or adding a recessed light and exhaust fan means more rough work and more inspection scope. Keeping the drain where it is saves money.
- Tile and material grade. Builder-grade ceramic sits at the low end; large-format porcelain or natural stone sits at the high end, both in product and in the skill required to set it.
- Permit scope. A conversion with a valve and drain change pulls a plumbing permit; adding electrical pulls another. Miami Springs runs its own permitting, so scope and timeline both depend on what you file.
- Glass and fixtures. Frameless glass, a thermostatic valve, and higher-end trim add to the total; a fixed panel and a standard valve keep it lean.
A written estimate from us is a line-item quote – demo, rough plumbing, waterproofing, tile, glass, fixtures, permit, cleanup – so you can see exactly what you’re paying for. Upfront pricing, no surprises: the number you see is the number you pay. If the project crosses $10,000, you qualify for $1,000 off, and 0% financing for 18 months is available. Call (833) 968-1198 for an exact quote.
See the difference
Before
After
Before
After
Before
AfterWhy a Miami Springs conversion isn’t the same job as one in Hialeah or Doral
Miami Springs is a 1920s planned airport city, and nearly every project here runs through the town’s own permitting department and a design review that cares about Mediterranean Revival character. That’s a level of scrutiny contractors working in neighboring Hialeah or Doral simply don’t encounter. When we open a wall on a home near the canal grid north of Miami International Airport, we’re often working on stucco over concrete block or hollow clay tile, where moisture has been wicking for decades and the fix is structural, not cosmetic. The plumbing is frequently original cast iron, which means a drain relocation is really a drain replacement, and the valve wall may need furring to fit a modern pressure-balance valve.
Subtropical Miami-Dade gives us year-round construction, but the May-October rainy season means a demo that leaves a wall open can take on water fast, so we sequence the waterproofing to close the wall the same week. Because the area sits in the high-velocity hurricane zone, any structural change triggers Miami-Dade NOA product approvals and wind-load engineering, and the town – not the county – signs off. Homeowners here often pair a bathroom conversion with exterior work, and we handle Metal Roofing in Miami Springs and Tile Roofing in Miami Springs when the same house needs it. If the bathroom is part of a larger scope, our Bathroom Remodeling in Miami Springs page covers the wider project, and if you’re weighing multiple trades at once, our Bathroom Remodeling service hub lays it out. We work throughout Miami Springs and the ZIP 33166 area.
Serving Miami Springs, FL – Our Local Coverage Area
We serve Miami Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Tub-to-Shower Conversion in Miami Springs
Most conversions run 3 – 6 working days, with inspection scheduling potentially adding a day or two. The build itself is quick; the pacing depends on rough plumbing inspection and how fast you lock in tile choices. Call (833) 968-1198 and we’ll map the timeline for your specific bathroom on a free estimate.
Yes, you’ll need a permit, and Miami Springs issues it through the town’s own building department rather than the county. Moving a drain or changing a valve is plumbing work that requires inspection. We pull the permits and see the inspections through – that’s part of the job, not an add-on. Call (833) 968-1198 to talk through the scope.
In most cases, yes, and that’s the most common way we do it. Keeping the drain in roughly the same spot and swapping the valve in the same wall keeps the job simpler and less expensive. The one thing we won’t skip is a proper waterproofing membrane – do it right or the shower fails. Call (833) 968-1198 for an on-site look at your drain location.
Expect $4,130 – $11,800 depending on footprint, tile grade, glass, and whether plumbing moves. A straight swap with an acrylic pan and ceramic tile sits low; a tiled base, large-format porcelain, and frameless glass sits high. Call (833) 968-1198 for an exact written line-item quote – estimates are free.
Every conversion is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it covers the tile, waterproofing, and plumbing we install. Call (833) 968-1198 to review the details before you commit.
Get a free on-site estimate for your Miami Springs conversion
We’ll come out, measure the existing footprint, look at the drain and valve wall, and hand you a written line-item estimate for your tub-to-shower conversion in Miami Springs. No guesswork, no high-pressure pitch. You’ll know the number before we touch a thing. A live person answers (833) 968-1198 around the clock, seven days a week – no voicemail, no waiting until Monday. Call to schedule your free estimate and design consult.
Written by the team at Groundwork Construction Co.