Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Brownsville, FL: What the Job Really Takes
Cabinets & countertops in Brownsville, FL usually run $14,000 – $45,000 for the full set, with most single-kitchen jobs landing between $4,000 – $13,000 for cabinets and $2,000 – $6,500 for counters. Plan on three to five weeks from demolition to final caulk when layout stays put, longer if we’re moving a sink or a range. Call (833) 968-1198 and we’ll walk your kitchen and put a line-item number in writing.
How a Cabinets & Countertops Job Moves, Stage by Stage
Every kitchen we touch in Brownsville follows the same rhythm. Here’s what actually happens, and where you have to make a call.
Stage 1: Measure and template (day 1, about two hours)
We laser-measure walls, check for out-of-square corners (common in older Brownsville block homes), and note where the floor dips. This is when you decide door style, finish, and whether you’re keeping the existing footprint or shifting the sink. Nothing gets ordered until you sign off on the layout drawing.
Stage 2: Demolition and prep (days 2 – 3)
Old cabinets, counters, and backsplash come out. We cap plumbing, kill the circuits feeding the range and disposal, and repair any drywall or plaster the removal tears up. If the wall behind the cabinets is rough block, we fur it out so the new boxes sit flush. You’ll see the room stripped bare by end of day two.
Stage 3: Cabinet install (days 4 – 6)
Base cabinets go in first, leveled and shimmed, then uppers hung and screwed into studs or blocking. This is where the KraftMaid order gets checked against the drawing, door by door. You decide hardware placement now, before the counters go on, because drilling after the slab is set is a bad idea.
Stage 4: Template and counter fabrication (days 7 – 12)
The counter fabricator templates the installed cabinets, then cuts and finishes the slab or top. Stone and quartz take the longest lead time; laminate and butcher block move faster. You pick the edge profile and sink cutout at this stage. Expect the kitchen to sit open for several days while the top is being made.
Stage 5: Set, plumb, and finish (days 13 – 18)
Counters get set and seamed, the sink and faucet go in, the disposal gets wired, and the backsplash goes up if it’s part of the scope. Final walkthrough covers door alignment, drawer glide tension, and caulk lines. That’s the point where the 730-Day Done Right Promise kicks in, in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Matter: Cabinets and Counters
Most of the decisions on this job come down to four or five real forks in the road. Here’s how we walk homeowners through them.
- Stock vs. semi-custom cabinets. Stock boxes are fastest and cheapest but come in fixed sizes, so you fill gaps with filler strips. Semi-custom, like the KraftMaid line we install, lets you hit odd wall lengths in these older Brownsville kitchens without a visible patch. The trade-off is lead time, typically four to six weeks versus two.
- Quartz vs. granite vs. laminate counters. Quartz is non-porous and holds up to Miami humidity without sealing; granite needs resealing every year or two but handles hot pans better; laminate is the budget play and looks fine until a seam lifts near the sink. Cambria and similar quartz run $2,000 – $6,500 installed for a standard kitchen.
- Full overlay vs. inset doors. Full overlay is the practical pick, hides the frame, and cleans up easier. Inset looks period-correct in a 1950s block home but costs more and demands tighter tolerances.
- Plywood vs. particleboard boxes. Plywood holds screws better and survives a leak under the sink. Particleboard is cheaper and fine in dry spots, less forgiving in a Brownsville kitchen where a supply line can weep for a week before anyone notices.
- Under-cabinet lighting and outlets. Adding a circuit for under-cabinet lights and a dedicated microwave line is the difference between a workable kitchen and one full of extension cords. Decide it at Stage 1, not after the drywall is closed.
What Cabinets & Countertops Cost in Brownsville, FL
The realistic range for this job in Brownsville is $14,000 – $45,000, with the number landing higher when you go semi-custom, stone, and add a peninsula or island.
| Line item | Typical range |
|---|---|
| Cabinets (supply and install) | $4,000 – $13,000 |
| Countertops (supply and install) | $2,000 – $6,500 |
| Backsplash | $800 – $2,500 |
| Kitchen island (if added) | $3,000 – $10,000 |
Four variables push a job toward the high end. Footprint size is the biggest: a galley in a 1940s Brownsville block home is a different number than an L-shaped kitchen with a peninsula. Existing condition comes second, because out-of-square walls, old galvanized supply lines, and a floor that’s settled mean more prep. Relocating the sink, range, or a wall-mounted panel adds plumbing and electrical labor and, in some cases, a permit. Material grade moves the number in big steps. And permit scope, whether this is a straight swap or part of a larger remodel, changes both the fee and the inspection schedule.
A written estimate from us lists each of these as a line, with the brand and model named, and the number you see is the number you pay. It does not include appliance purchases, structural changes discovered mid-demolition, or the cost of a new floor if the old one can’t survive the cabinet install. We flag those before we start, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Brownsville Homes Specifically Do to This Job
Brownsville (33142) is one of Miami-Dade’s oldest historically Black neighborhoods, and the housing stock tells you what to expect. Most of what we work on here is single-story concrete-block and CBS construction from the 1940s through the 1960s, platted tightly per the original Brownsville plat. That means narrow lots, walls that weren’t always built square, and cabinet runs that need real custom fitting rather than a stock box dropped into place. The sun and heavy summer downpours that Miami throws at these homes also mean a leak behind a cabinet box or under a countertop can turn into mold fast, so we look hard at the plumbing wall during demo and address it before the new cabinets go up. And because many blocks here are checkerboarded with vacant infill lots between occupied homes, we confirm the plat boundary and what’s actually buildable on a tight lot before any cabinet run gets committed to a drawing. If you’re pairing this with a bigger project, it’s often part of Kitchen Remodeling in Brownsville, and we cover the whole of Brownsville on our service-area map. Homeowners often pair this job with Walk-In Showers & Shower Remodeling in Brownsville or a Tub-to-Shower Conversion in Brownsville when the bathroom is due at the same time. For the wider scope, see our Kitchen Remodeling service.
Serving Brownsville, FL – Our Local Coverage Area
We serve Brownsville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Cabinets & Countertops in Brownsville
Most jobs run three to five weeks from demo to final walkthrough, with the counter fabrication being the longest single wait. If we’re staying in the existing footprint, you can typically keep a temporary kitchen setup for the middle stretch. Call (833) 968-1198 for a schedule built around your specific kitchen.
A straight cabinet and counter swap usually doesn’t require a permit, but moving plumbing, relocating a gas range, or adding an electrical circuit does. We check the scope against Miami-Dade requirements before we start and pull what’s needed. Call (833) 968-1198 and we’ll tell you upfront whether your job needs one.
Yes, and that’s the most common version of this job. Keeping the sink and range where they are holds the cost near the low end of the $14,000 – $45,000 range. Moving a drain line or opening a wall pushes it higher and adds permit and inspection time. Call (833) 968-1198 to talk through your layout.
Expect $14,000 – $45,000 for a full kitchen, with cabinets at $4,000 – $13,000 and counters at $2,000 – $6,500 as the two biggest lines. Material grade and footprint size are what move it most. Call (833) 968-1198 for an exact quote; estimates are free.
Every job we install is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right, for two full years. That covers our workmanship, not the manufacturer’s product warranty, which we hand you in writing. Call (833) 968-1198 to schedule your estimate.
Get a Free Cabinets & Countertops Estimate in Brownsville
We’ll walk your kitchen, measure the walls, and hand you a written line-item quote for cabinets and countertops in Brownsville with brands and models named, so there’s nothing to guess at. Call (833) 968-1198 and a live person picks up, day or night. We’ll book a free on-site estimate at a time that works for you, and if you’re ready to move, 0% financing for 18 months and $1,000 off projects over $10,000 are on the table.
Written by the team at Groundwork Construction Co.