Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Gladeview: What the Job Actually Involves
New cabinets and countertops in Gladeview run $14,000 to $45,000 for a full kitchen set, and a typical tear-out-and-replace takes two to four weeks from demo to final caulk. That range covers semi-custom or custom boxes, a stone or quartz top, and the electrical and plumbing adjustments a 1940s-1960s concrete-block home usually forces. Call (833) 968-1198 and we’ll walk the kitchen with you, measure the walls, and put a written line-item number in your hands before anything is ordered.
How the Cabinets & Countertops Process Runs, Stage by Stage
Most homeowners are surprised at how much of this job happens before a single box is delivered. Here’s the real sequence we follow on Cabinets & Countertops work in Gladeview.
Stage 1: Site survey and templating (day 1, 2-3 hours)
We measure every wall, check for out-of-square corners, and confirm where the plumbing stub-outs and electrical drops actually land. In older Gladeview masonry homes the walls are rarely plumb, so we plan for scribe fillers rather than discovering the gap at install. This is also when you decide layout: keep the existing footprint or shift the sink, range, or refrigerator. Moving any of those three changes everything downstream.
Stage 2: Demo and rough-in (days 2-4)
Old cabinets come out, and so does the old countertop and backsplash. If you’re relocating plumbing or adding a circuit for a new range or dishwasher, the licensed trades rough in now and the county inspects before we close the walls. Skipping that inspection is how homeowners inherit a problem at resale. You’ll confirm appliance specs here, because cabinet openings are cut to those exact dimensions.
Stage 3: Cabinet install and leveling (days 5-8)
Base and wall cabinets go in, shimmed and leveled against walls that may be an inch out over eight feet. Crown, fillers, and toe kick get fitted. You’ll walk the layout and confirm drawer and door swings clear the appliances and each other. This is the last easy moment to change a pull-out or a deep drawer stack.
Stage 4: Countertop template and fabrication (days 9-16)
Once cabinets are set, the top gets templated. Stone and quartz are cut off-site and typically return in 5 to 10 business days. You’ll pick edge profile, sink cutout type, and whether you want an undermount or drop-in. Fabrication lead time is the single biggest variable in the schedule, so choosing your slab early keeps the job moving.
Stage 5: Set, seal, and final walkthrough (days 17-21)
The top is set, seams are epoxied, the sink and faucet connect, and we caulk the backsplash line. Then we walk it with you and fix what you flag on the spot. Everything we install carries the 730-Day Done Right Promise: if it’s not right, we make it right, in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Weigh Before Anything Is Ordered
This is where the budget actually gets made or broken. Here’s the honest trade-off on each.
- Semi-custom vs. custom cabinets: Semi-custom (KraftMaid is a solid benchmark) handles most 33147 kitchens and saves real money. Custom buys you non-standard depths and unusual finishes, at roughly 30-50% more. Full-overlay vs. framed doors, plywood vs. particleboard boxes, and soft-close hardware are the line items that separate a good cabinet from a cheap one.
- Quartz vs. granite vs. laminate: Quartz (Cambria and similar) is non-porous, doesn’t need sealing, and holds up to South Florida humidity. Granite is natural and unique but wants resealing yearly. Laminate is the budget play and can look sharp, but it chips at the sink edge.
- Edge profiles and thickness: A standard eased edge keeps cost down; waterfall or mitered edges add fabrication labor. 3cm vs. 2cm slabs change both cost and how the top reads.
- Sink and faucet style: Undermount sinks need the top fabricated for them, so decide now. A farmhouse apron sink requires a modified cabinet box.
- Backsplash: A full-height slab backsplash looks best and costs the most; a 4-inch splash behind the counter is the low-cost standard.
What Cabinets & Countertops Costs in Gladeview, FL
Plan on $14,000 to $45,000 for a full kitchen cabinet and countertop package in Gladeview, with most jobs landing in the mid-$20s. Here’s what moves you toward the low or high end.
| Line item | Typical range |
|---|---|
| Cabinet installation | $4,000-$13,000 |
| Countertop installation | $2,000-$6,500 |
| Backsplash installation | $800-$2,500 |
| Kitchen island installation | $3,000-$10,000 |
The five variables that push a job up or down:
- Kitchen size:
- Existing condition: out-of-square walls, water-damaged subfloor, or an unpermitted past remodel add prep labor.
- Relocating plumbing, electrical, or structure: moving the sink or range means new rough-in and a county inspection.
- Material grade: custom boxes and a thick stone slab sit at the top; semi-custom and laminate sit at the bottom.
- Permit scope: structural or trade changes require county permits and add both fees and schedule time.
A written estimate should list cabinets, countertops, install labor, sink and faucet, disposal, and permit costs line by line. Watch for what’s excluded: appliance cost, drywall repair after demo, and floor patching are the usual suspects. Our pricing is upfront, no surprises, and we back it with 0% financing for 18 months plus $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Gladeview Homes Specifically Do to This Job
Gladeview is an unincorporated pocket of Miami-Dade around NW 79th St and the 33147 ZIP, which means there’s no city hall to pull permits from. Every job here runs through Miami-Dade County’s product-approval (NOA) and High-Velocity Hurricane Zone rules instead. That matters even for cabinets and countertops: any structural change or window-adjacent work gets specced to county standards, not a municipal code.
The housing stock shapes this job more than anything. Most of what we walk into is 1940s-1960s concrete-block and terrazzo, often expanded over decades with carports turned into rooms or informal rear additions. Those additions mean we do a real survey before ordering a single cabinet, because a wall that isn’t where the drawing says it is will wreck a cabinet run. The county’s 40-year recertification and post-storm inspection process regularly surfaces unpermitted add-ons, so bringing a kitchen up to code often means resolving that first. This is Cabinets & Countertops work done the county’s way, not a generic install.
Serving Gladeview, FL – Our Local Coverage Area
We serve Gladeview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Cabinets & Countertops in Gladeview
Two to four weeks from demo to final walkthrough, with countertop fabrication lead time (5 to 10 business days) usually the long pole. Call (833) 968-1198 for a schedule built around your slab choice.
Straight cabinet and top swap-out usually doesn’t require one. Relocating plumbing, adding an electrical circuit, or touching structure does, and in 33147 that means a Miami-Dade County permit and inspection. We pull it and pass it; call (833) 968-1198 to confirm your scope.
Yes. Keeping the sink, range, and refrigerator where they are avoids most rough-in work and county inspection, and keeps you at the lower end of the $14,000-$45,000 range. Call (833) 968-1198 and we’ll tell you which layout saves you the most.
Typical full packages run $14,000 to $45,000. Cabinet installation alone is $4,000-$13,000 and countertop installation $2,000-$6,500, depending on size and material grade. Call (833) 968-1198 for an exact quote; estimates are free.
Every project is covered by our 730-Day Done Right Promise: if the install isn’t right, we make it right. That’s one of the longest workmanship guarantees in the residential space, and it’s in writing. Call (833) 968-1198 to start.
Get a Free Cabinets & Countertops Estimate in Gladeview
Book a free on-site estimate for Cabinets & Countertops in Gladeview. We’ll measure the kitchen, flag anything the older masonry or an unpermitted addition might change, and hand you a written line-item number with no guesswork. This is part of a full Kitchen Remodeling in Gladeview project for many homeowners, and some pair it with Walk-In Showers & Shower Remodeling in Gladeview. If you’re weighing a broader scope, see our Kitchen Remodeling service and our Gladeview coverage. Homeowners often pair this with Tub-to-Shower Conversion in Gladeview while trades are already on site. Call (833) 968-1198; a live person answers 24/7, and we’ll set the visit around your schedule.
Written by the team at Groundwork Construction Co. of Miami.