Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Pinewood, FL: What It Involves and What It Costs
A tub-to-shower conversion in Pinewood typically runs $3,500 to $10,000 and takes five to ten working days from demo to final inspection. The job means removing the existing tub, reworking the drain and valve to shower position, rebuilding the wet wall, and setting a new waterproofed shower base and walls. Most conversions here need a Miami-Dade permit. Call (833) 968-1198 for a free on-site estimate with a written, line-item quote.
How a Tub-to-Shower Conversion Actually Runs, Stage by Stage
Every conversion we take on in Pinewood follows the same five stages. Timelines shift when the plumbing surprises us, but the order doesn’t.
Stage 1: Measure and scope (day 1, about 90 minutes)
We photograph the existing tub surround, check the drain location and valve height, and probe the wall behind the tile for soft drywall. You decide the shower footprint (typically 36×48 or 48×48), the base type, and whether the existing valve stays or gets replaced. That decision drives the budget more than any other single choice.
Stage 2: Permit and demo (days 1 to 3)
We pull the plumbing permit through Miami-Dade before demo begins, so there’s no gap between inspection and teardown. Demo means the tub, surround, and any failing backer board come out, and the CMU block wall behind gets exposed. On mid-century concrete-block homes in Pinewood, this stage regularly uncovers drywall furring strips that have been holding moisture behind the tile for years. That wood gets replaced, not covered.
Stage 3: Rough-in plumbing and inspection (days 3 to 5)
Our licensed plumber relocates the drain and supply lines to shower position, sets a new shower valve, and clamps and tests the drain. A Miami-Dade plumbing inspector then checks the rough work before anything gets closed up. This inspection is the one step you cannot skip or shortcut on a permitted conversion.
Stage 4: Waterproofing and tile (days 5 to 9)
We install a sloped mortar bed or a bonded waterproofing membrane system across the base and walls, then tile. In our humidity, waterproofing quality decides whether the shower lasts 20 years or five, and we won’t lay a single tile until that membrane passes a leak test. You pick tile size, pattern, and grout here. Give us your choices by the end of Stage 3 or you’ll hold the schedule.
Stage 5: Glass, fixtures, and final inspection (days 9 to 10)
Glass panel or door goes in, the trim kit and shower head are set, caulk goes down, and the final inspection closes the permit. We walk the job with you the same day and hand over the 730-Day Done Right Promise in writing – if something on the shower isn’t done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Tub-to-Shower Conversion
You’ll spend most of your decision time on four things. Here’s the honest trade-off on each.
- Shower base: Acrylic pans cost less and install faster; cultured marble gives a solid feel without tile grout; a tiled mortar-bed base lets you match the walls but adds waterproofing time and labor. Tiled bases hold up best in a wet, humid climate like ours.
- Wall finish: Large-format porcelain tile (12×24 or bigger) means fewer grout lines to scrub and reads clean and modern. Smaller subway tile looks classic but has more joints to maintain. Acrylic wall surround kits are the low-maintenance, lower-cost end of the range.
- Glass: A fixed glass panel costs less than a pivot door and works well on a 36-inch footprint. Frameless glass looks better and needs less frame maintenance; framed glass costs less. Tempered glass is required either way.
- Fixtures: A pressure-balance valve is code-required and the minimum. A thermostatic valve adds precise temperature control and costs more. Kohler and similar brands in the mid range balance cost with parts availability.
What Tub-to-Shower Conversion Costs in Pinewood, FL
Expect $3,500 to $10,000 for a tub-to-shower conversion in Pinewood. The low end covers a standard 30×60 footprint with a stock acrylic pan and surround, keeping the existing drain and valve. The high end covers a larger custom tiled shower, relocated plumbing, frameless glass, and premium fixtures.
Five things move the number:
- Footprint size and shape: A 36×48 or 48×48 shower needs more tile, more waterproofing, and more framing than a straight 30×60 swap.
- Plumbing relocation: Moving the drain or valve is the biggest single cost driver. Keeping the existing drain location saves real money.
- Condition behind the wall: Rotted furring, failing backer board, or a drain that’s gone soft on a 1960s block home all add labor.
- Material grade: Acrylic pan and surround versus large-format porcelain on a tiled mud bed is roughly a 2x split on material cost.
- Permit scope: A plumbing permit is standard; adding electrical for a vent fan or heated floor adds a separate permit and trade.
A written estimate from us includes demo, disposal, framing repairs, waterproofing, tile, base, glass, fixtures, permit, and inspection. It does not typically include moving a load-bearing wall, new subfloor, or HOA fees. That’s part of a wider scope, and where it’s needed we handle it under our Bathroom Remodeling service.
See the difference
Before
After
Before
After
Before
AfterWhat Pinewood Homes Specifically Do to This Job
Housing in the 33167 ZIP is largely mid-century concrete-block single-family construction, often 1950s-60s ranch and Miami-modern homes, plus 1970s-80s low-rise apartments and newer infill townhomes. Block-and-stucco dominates, so converting a tub means cutting into solid CMU, not opening a wood stud wall. That cutting is slower, and it’s why the plumbing stage of a Pinewood conversion tends to run a day longer than it would on a frame house.
Because Pinewood sits in Miami-Dade’s high-velocity hurricane zone, every product that goes into the shower, from glass to exterior vent terminations, has to meet windborne-debris and product-approval requirements under the Florida Building Code. And in the low-lying blocks near the Little River, shallow water tables and floodplain elevation rules affect how exterior penetrations and slab work get sequenced. The subtropical humidity means we build mold-resistant assemblies in the shower enclosure, because a lazy vapor barrier here fails within a couple of years. We cover all of Pinewood with this work.
Serving Pinewood, FL – Our Local Coverage Area
We serve Pinewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tub-to-Shower Conversion in Pinewood
Five to ten working days from demo to final inspection for most Pinewood homes. Mid-century block construction and the required Miami-Dade plumbing inspection push jobs toward the longer end. The biggest schedule risk is back-ordered glass, so we order it at Stage 1. Call (833) 968-1198 to get a firm timetable for your bathroom.
Yes. Moving a drain and replacing a shower valve is plumbing work, and Miami-Dade requires a permit and inspection for it. We pull the permit and pass the rough-in and final inspections as part of the job, and you get the inspection record at the close. Call (833) 968-1198 if you have a quote that skips the permit.
Often yes, if the existing drain and valve sit where the new shower will go. A straight swap to a 30×60 shower over the existing tub footprint usually needs minimal plumbing relocation, which keeps you near the $3,500 end of the range. A larger footprint or a relocated drain costs more. Call (833) 968-1198 for an exact quote, and the estimate is free.
A conversion removes a tub and builds a shower in its place, which involves plumbing and usually structure and tile. A shower replacement swaps the existing shower for a new one. In Pinewood, most conversions are on homes with an aging tub the homeowner no longer uses. Call (833) 968-1198 to talk through which applies to your bathroom.
Every conversion we complete is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If it’s not done right, we make it right. Waterproofing and workmanship both fall under it, and we put the coverage in writing before demo starts. Call (833) 968-1198 with any warranty question.
Get a Free Tub-to-Shower Conversion Estimate in Pinewood
If you’re ready to price a tub-to-shower conversion in Pinewood, call (833) 968-1198. A live person answers around the clock, so you’re never stuck in voicemail. We’ll set a free on-site visit, measure the bathroom, and send a written line-item estimate with a fixed price and the 730-Day Done Right Promise. Nothing gets built until you approve. Upfront pricing, no surprises, and 0% financing for 18 months on approved projects.
Written by the team at Groundwork Construction Co.