Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Miami, FL: What It Costs and What the Job Actually Involves
Metal roofing in Miami runs $17,700 to $47,200 for a full install, and most homes take five to ten working days from tear-off to final inspection. That range covers the panels, underlayment, fasteners, trim, and the Miami-Dade NOA documentation your inspector will ask for. Small low-slope sections land near the bottom; a steep, cut-up roof on a 1950s CBS home with a lot of valleys and penetrations pushes toward the top. Call Groundwork Construction Co. at (833) 968-1198 for a free on-site estimate and a written line-item quote.
How a Metal Roof Goes On: Day by Day Through the Job
Metal isn’t a weekend swap. The sequence matters, and skipping a stage is how roofs leak in year three.
Stage 1 – Permit and NOA check (one to three weeks before work starts). We submit the plans to Miami-Dade and pull the roofing permit. Every panel system and fastener has to carry a current Miami-Dade NOA number. This is the longest wait in the project, so we start it as soon as you approve the estimate. You decide the panel profile here, because the NOA is tied to that specific product.
Stage 2 – Tear-off and deck inspection (days one and two). We strip the old roof down to the deck, haul it off, and inspect the sheathing. On older Miami homes we often find soft spots near penetrations and along the eaves from years of humidity. You get photos and a price for any deck replacement before we proceed.
Stage 3 – Underlayment and flashing (days two and three). A high-temp, peel-and-stick or synthetic underlayment goes down over the deck, then we detail every valley, wall junction, vent, and edge with new flashing. In a subtropical climate, this layer carries most of the water protection, so it gets done right the first time.
Stage 4 – Panel install (days four through eight, depending on roof size). Panels go up in runs, fastened to the deck and battens per the engineer’s specs. You don’t have to decide anything during this stretch, though we keep you posted on progress.
Stage 5 – Inspection and closeout (final one to two days). The city inspector signs off, we clean the site, and you receive the documentation package: NOA numbers, warranty paperwork, and your 730-Day Done Right Promise coverage from Groundwork.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Weigh Before the Panels Go On
Most of the decisions happen at the estimate, not mid-job. Here’s what actually matters:
- Standing seam vs. exposed fastener. Standing seam hides the fasteners under a raised rib and holds up better in wind and salt air; it costs at the top of the range but is the right call on coastal Miami homes. Exposed-fastener panels are cheaper but rely on rubber washers that age in the sun.
- Panel gauge and coating. Thicker steel and a quality finish (Kynar-type coatings) resist the salt-laden coastal air far better than thin imports. This is where low bids cut corners.
- Color and profile. Some HOAs and historic districts in Miami restrict color and panel style, so check before you commit.
- Brand and system. GAF, CertainTeed, and Owens Corning all make metal systems, and each carries its own NOA and warranty. Pairing a branded panel with a matching underlayment and fastener package matters more than the label alone.
- Exposure. If your roof has no overhang or sits fully sun-exposed, a better coating pays for itself in less fading and less rework.
What Metal Roofing Costs in Miami, FL
Expect $17,700 to $47,200 for a complete metal roof install in Miami. The number that lands in your quote depends on five things:
- Square footage and roof complexity. A simple gable is pricing-friendly; hips, valleys, dormers, and multiple penetrations add labor and waste.
- Existing roof condition. A single layer of shingles tears off clean; multiple layers, rotten decking, or old flat-roof membrane add disposal and repair cost.
- Structural upgrades. Older unreinforced masonry and low-slope homes sometimes need new blocking or sheathing to meet wind-load requirements. That’s real money and real time.
- Panel type and gauge. Standing seam and heavier steel sit at the high end; exposed-fastener panels at the low end.
- Permit scope and inspections. Structural changes and wind-mitigation upgrades widen the permit scope, which adds inspection steps and fees.
Your written estimate itemizes panels, underlayment, fasteners, trim, deck repair allowance, permit fees, and disposal, plus the 730-Day Done Right Promise and manufacturer warranty. It doesn’t include structural repairs found after tear-off or HOA-related color changes; those get priced in writing before we proceed. No-hassle upfront pricing means the number you see is the number you pay, with 0% financing for 18 months and $1,000 off projects over $10,000 available.
See the difference
Before
After
Before
After
Before
AfterWhy Miami Homes Make This Job Different
Miami is the only place in the country with its own product-approval system. Miami-Dade County requires every roof, window, and shutter to carry a Miami-Dade NOA number, not just a Florida or national approval. That means the panel you pick has to be on the approved list before the permit is even reviewed. On top of that, the 40-Year Recertification law (and 25-year for coastal buildings) triggers structural and wind-mitigation inspections that often coincide with re-roofing on older stock.
The housing stock compounds it. Neighborhoods like Buena Vista, Little Havana, and parts of Coral Way are full of pre-1970s CBS (concrete block and stucco) homes with unreinforced masonry and low-slope or flat roofs. That combo means a metal roof here is as much about documented wind resistance as it is about looks. We regularly see old flat roofs fail at seams and penetrations after hurricane season, and salt air eats fasteners and finishes fast. For a wider look at how these jobs fit together, see our roofing service and the full Roofing in Miami scope. We cover all of Miami and the surrounding areas.
Serving Miami, FL – Our Local Coverage Area
We serve Miami and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Metal Roofing in Miami
A typical metal roof install takes five to ten working days on site, plus one to three weeks for the permit to clear before work begins. Larger or more complex roofs can stretch to two weeks of install time. Call (833) 968-1198 for a timeline based on your specific roof.
Yes. Miami-Dade requires a roofing permit, and the panel system must have a current Miami-Dade NOA number. We pull the permit and handle the inspections as part of the job. Call (833) 968-1198 with your address and we’ll walk you through what your permit scope looks like.
Often, yes, but older Miami homes sometimes need new sheathing or blocking to meet wind-load requirements. We inspect the deck during tear-off and price any repairs in writing before proceeding. That keeps the surprise out of the project. Call (833) 968-1198 for an exact quote – estimates are free.
Metal roofing in Miami typically runs $17,700 to $47,200, depending on roof size, panel type, and any structural upgrades. Standing seam and coastal salt exposure push toward the high end. Call (833) 968-1198 for an exact quote – estimates are free.
You get a manufacturer warranty on the panels plus our 730-Day Done Right Promise on the workmanship. If it’s not done right, we make it right. Call (833) 968-1198 to review the coverage details for your job.
Homeowners in Miami often pair metal roofing with Window Replacement in Miami or Impact Windows & Doors in Miami to close up wind and water gaps at the same time.
Get a Free Metal Roofing Estimate in Miami
If you’re weighing a metal roof against another replacement, a free on-site estimate is the honest way to see the real number. We’ll inspect the deck and existing roof, measure the panels, and give you a written line-item quote with the 730-Day Done Right Promise behind it. Call Groundwork Construction Co. at (833) 968-1198 for your free estimate; a live person answers around the clock.
Written by the team at Groundwork Construction Co.